10/15
This feature provides 3 user selectable call ringer signals and signal off.
To set your favorite call ringer signal.
* Press the MODE button until the [C 01 to 03 or oF] appears on the LCD.
* Press the up[?]or down[?] button to select the call melody type.
* Press the PTT button to confirm.
* To activate the call, click the PTT button twice quickly.
9)Out Of Range Alert
Icon blinks as the receiving signal gets weaker. The icon stops blinking
when the receiving signal comes back to normal status.
10)Transmitting
* Press and hold the PTT button (The “TX”LED will light red.)
* Speak slowly and clearly
* To Stop the transmission, release the PTT button.
* If there are no more receiving signal for 5 seconds, the unit will go into
power save mode.
11)Receiving
The coding feature reduces the possibility of interference and provides
enhanced communication. You can only listen to a call that has correct
matching code. When a signal is received, the received signal strength
indicator works and the LED lights green.
Important :
Before transmitting or receiving to the other parties
* Correct channel is selected (1 to 8) and
* Correct code is set (00 to 38)
12)Channel Scanning
This feature allows you to monitor all activated channels while scanning.
To activate the Scan
* Press the SCAN button
* Radio will begin scanning.
* When in scan mode, the display will show each scanning channel.
* After an activated channel is scanned, the scan stops to receive the signal.
If there is no more signal, the scan will resume automatically
To disable the Scan
* Press the SCAN button, and the unit will stop the scanning.
* SCAN icon indicator will disappear from the LED.
* The unit will return to home channel.
