TriStar AC-5552 User manual

AC5552

EN| Instruction manual

NL| Gebruiksaanwijzing

FR | Mode d’emploi

DE| Bedienungsanleitung

ES | Manual de usuario

PT | Manual de utilizador

IT | Manuele utente

SV | Bruksanvisning

PL | Instrukcja obsługi

CS | Návod na použití

SK | Návod na použitie

DA| Brugervejledning

FI | Käyttöopas

NO| Bruksanvisningen

Local air conditioner

PARTS DESCRIPTION / ONDERDELENBESCHRIJVING / DESCRIPTION DES PIÈCES /TEILEBESCHREIBUNG /

DESCRIPCIÓN DE LAS PIEZAS / DESCRIÇÃO DOS COMPONENTES / DESCRIZIONE DELLE PARTI /

BESKRIVNING AV DELAR / OPIS CZĘŚCI / POPIS SOUČÁSTÍ / POPIS SÚČASTÍ / BESKRIVELSE AF

BESTANDDELE / OSIEN KUVAUKSET / BESKRIVELSE AV DELER

1 2

10 12 11

Instruction manual

SAFETY

• Please read this user’s manual carefully to

ensure proper use, maintenance and

installation.

• By ignoring the safety instructions the

manufacturer cannot be held responsible for

the damage.

• The appliance is for indoor use only.

• Do not use the unit on a socket that is

damaged or that has not been installed

correctly.

• Do not use the unit:

– near a source of fire.

– in an area where oil is likely to splash.

– in an area exposed to direct sunlight.

– in an area where water is likely to

splash.

– near a bath, a shower or a swimming

pool.

• Never insert your fingers or objects into the

air outlet. Take special care to warn children

of these dangers.

• Keep the unit upright during transport and

storage.

• Before cleaning the unit, always turn off or

disconnect the power supply.

• Always turn off and disconnect the power

supply before moving the unit.

• WARNING: To avoid the risk of fire, do

not cover the unit.

• All the unit sockets must comply with the

local electric safety requirements. If

necessary please check.

• If the supply cord is damaged, it must be

replaced by the manufacturer, its service

agent or similarly qualified persons in order

to avoid a hazard.

• If the supply cord is damaged, it must be

replaced by the manufacturer, service agent

or qualified person(s) in order to avoid a

hazard.

• This appliance can be used by children aged

8 years and above, persons with reduced

physical, sensory, and mental capabilities or

persons with a lack of experience and

knowledge if they have been given correct

supervision or instruction concerning the use

of the appliance in a safe way and

understand the hazards involved. Children

should not play with the appliance. Cleaning

and user maintenance should not be carried

out by children without supervision.

Instruction manual

• This appliance is only to be used for

household purposes and only for the

purpose it is made for.

• Notes:

– In the case of any damage, please

disconnect the power supply and contact

the dealer or a designated repair shop.

– In any case, the power cord shall be

firmly grounded.

– To avoid the possibility of danger, if the

power cord is damaged, please

disconnect the power supply. It must be

replaced by the dealer or a designated

repair shop.

Warning

• Please use the recommended defrosting and

cleaning process from the manufacturer

only. Do not accelerate the defrosting or

cleaning process in any other way.

• The appliance shall be stored in a room

without continuously operating ignition

sources (for example: open flames , an

operating gas appliance or an operating

electric heater).

• Do not pierce or burn.

• Be aware that refrigerants may not contain

an odor.

• The appliance should be installed, operated

and stored in a room with a floor area larger

than 12 m2. (X=4 for 5000Btu/h, 7000Btu/h,

8000Btu/h; X=7.7 for 9000Btu/h. 10000Btu/

h, 10500Btu/h)

• Only contact an authorized service

technician for repair or maintenance of this

unit.

• Do not pull , deform or modify the power

supply cord or immerse in water . Pulling or

misuse of the power supply cord could result

in damage to the unit and cause an electrical

shock.

• Compliance with national gas regulations

should be observed.

• Keep ventilation openings clear of

obstructions.

• Any person who is involved with working on

or opening a refrigerant circuit should hold a

current valid certificate from an industry

accredited assessment authority which

authorizes their competence to handle

refrigerants safely in accordance with an

industry recognized assessment

specification.

Instruction manual

• Servicing should only be performed as

recommended by the equipment

manufacturer. Maintenance and repair

requiring the assistance of other skilled

personnel should be carried out under the

supervision of a person(s) competent in the

use of flammable refrigerants.

• Do not stop the unit by pulling out the power

plug whilst in operation as this may cause

an electric shock or fire due to heat

generation unless strange sounds are heard

or if strange smells or smoke appear from

the unit.

Specific information regarding appliances with R 290 refrigerant gas.

• Thoroughly read all of the warnings.

• When defrosting and cleaning the

appliance , do not use any tools other than

those recommended by the manufacturing

company.

• The appliance should not be stored in a

room with continuously operating ignition

sources (for example: open flames , an

operating gas appliance or an operating

electric heater).

• Do not puncture and do not burn.

• Appliance shall be installed, operated and

stored in a room with a floor area larger than

12 m2. (X=4 for 5000Btu/h, 7000Btu/h,

8000Btu/h; X=7.7 for 9000Btu/h. 10000Btu/

h, 10500Btu/h)

• This appliance contains Y g (see rating label

back of unit ) of R290 refrigerant gas.

• R290 is a refrigerant gas that complies with

the European directives on the environment.

Do not puncture any part of the refrigerant

circuit.

• If the appliance is installed, operated or

stored in a non-ventilated area, the room

must be designed to prevent to the

accumulation of refrigerant leaks that could

result in a fire risk or explosion due to

ignition of the refrigerant caused by electric

heaters, stoves, or other sources of ignition.

• The appliance must be stored in such a way

as to prevent mechanical failure.

Instruction manual

• Individuals who operate or work on the

refrigerant circuit must have the appropriate

certification issued by an accredited

organization that ensures competence in

handling refrigerants according to a specific

evaluation recognized by associations in the

industry.

• Repairs must be performed based on the

recommendation from the manufacturing

company. Maintenance and repairs that

require the assistance of other qualified

personnel must be performed under the

supervision of an individual specified in the

use of flammable refrigerants.

Batteries

• Do not expose the battery to high

temperatures or direct sunlight. Never throw

batteries into the fire. There is a danger of

explosion!

• Keep batteries away from children. Batteries

are not a toy!

• Do not open the batteries by force.

• Avoid contact with metallic objects.(Rings,

nails, screws et cetera) there is a danger of

short-circuiting!

• As a result of a short-circuit batteries may

heat up consider-ably or even catch fire. this

may result in burns.

• For your safety the battery poles should be

covered with adhesive strips during

transport.

• Do not touch a ruptured and/or leaking

battery. If the liquid from the battery gets into

your eyes, rinse your eyes as soon as

possible with clean water, without rubbing

your eyes. Immediately go to the hospital. If

it is not treated properly, it can cause eye

problems.

Refrigerant

(CE) N 842/2006: This unit contains the refrigerant R290. The amount

of refrigerant is less than 1kg, and is in a closed cooling circuit. The

coolant does have zero ozone depletion potential, but is a so-called

greenhouse gases under the Kyoto Protocol and may thus contribute

to global warming, if it is released to the atmosphere. Therefore only

trained technicians with refrigerant certificate make a filling or

emptying. Your appliance does not have be refilled with refrigerant if

used properly and has an undamaged coolant circuit. GWP: R290: 3

PARTS DESCRIPTION

1. Control panel

2. Air outlet with swinging louvers

3. Front panel

Instruction manual

4. Air inlet with air filter

5. Recessed handle

6. Air exhaust

7. Drain opening with sealing plug

8. Remote control

9. Exhaust hose

10. Exhaust hose adaptor

11. Slider

12. Slider adaptor

BEFORE THE FIRST USE

• Take the appliance andaccessoriesoutthebox.Removethe

stickers,protective foilorplasticfrom theappliance.

• Before using your appliance for the first time, wipe off all

removable parts with a damp cloth. Never use abrasive products.

• Place the device on a flat stable surface and ensure a minimum

of 50 cm. free space around the device. This device is not

suitable for installation in a cabinet or for outside use.

• Putthepower cable intothe socket.(Note: Make surethe

voltagewhich is indicated on the devicematchesthe

localvoltage beforeconnecting the device.Voltage220V-240V

50/60Hz)

• When the device is turned on for the first time, a slight odour will

occur. This is normal, ensure adequate ventilation. This fragrance

is only temporary and will disappear soon.

INSTALLATION

• The air-conditioner should be installed on a flat and stable

surface. Do not block the air outlet and allow at least 50cm

around the unit.

• Socket wiring should be in accordance with the local electric

safety requirements.

• If the unit has been tipped at more than 45°, allow it to stand

upright for at least 24 hours before turning it on.

• Do not operate in close proximity to curtains or other objects that

may block the air inlet and outlet.

Exhaust Hose Installation

• Attach one the end of the exhaust hose to the exhaust hose

adaptor.

• Attach the slider adaptor to the other end of the exhaust hose.

Instruction manual

• Attach and extend the adjustable slider to meet the length of your

window and connect the exhaust hose to the slider.

• Close the window to secure the slider in place. It must hold the

slider firmly in place. For maximum efficiency, we recommend that

any gaps between the adaptor and the slides of the window be

sealed off. Use duct tape if necessary.

• Attach the exhaust hose adaptor to the exhaust air outlet on the

unit.

• Adjust the length of the flexible exhaust hose and avoid making

any sharp bends in it.

• Plug in the unit and switch it on.

CONTROL PANEL AND DISPLAY

1. POWER Press to switch the unit ON or OFF

2. MODE Press to switch the operating mode

between COOL, DRY, FAN and

HEAT.

3. MODE INDICATOR This displays the selected mode.

4. SLEEP Press to turn sleep mode ON or

OFF

5. DOWN Press to decrease the temperature

or timer settings (16°C - 32°C).

Instruction manual

6. SWING Press to adjust the vertical direction

of the air flow.

7. SPEED Press to switch the fan speed to

HIGH, MEDIUM or LOW.

8. LED INDICATORS Displays the selected fan speed.

9. TIMER Press to set the timer for the unit to

automatically START and STOP.

10. UP Press to increase the temperature

or timer settings (16°C - 32°C)

11. DIGITAL DISPLAY Displays timer and temperature

settings.

USE

Startup and shut down

• Press the POWER button to turn the unit on. The unit will run in

FAN mode as default.

• Press the MODE button to select the desired operation.

• Press POWER again to turn off the power.

Operating Modes

The unit has 5 operating Modes - COOL, HEAT, FAN, DRY, and

SLEEP.

COOL

• Press the MODE button repeatedly until the COOL operation

LED lights up.

• Use the UP and DOWN buttons to adjust the displayed

temperature to your desired temperature. The temperature can

be set between 16°C and 32°C.

• Set the fan speed by pressing the SPEED button repeatedly until

the desired speed is selected.

• Press the SWING button to spread the direction of the air

horizontally.

The air conditioner will automatically stop if the room temperature is

lower than the selected temperature.

HEAT

• Press the MODE button repeatedly until the HEAT operation LED

lights up.

• Use the UP and DOWN buttons to adjust the displayed

temperature higher than the room temperature.

• Set the fan speed by pressing the SPEED button repeatedly until

the desired speed is selected.

• For continuous operating the drainage hose should be attached

to the unit.

FAN

In FAN mode the air in the room is circulated and not cooled.

• Press the MODE button repeatedly until the FAN operation LED

lights up.

• Set the fan speed by pressing the SPEED button repeatedly until

the desired speed is selected.

DRY

• Connect the drainage hose to the drainage outlet at the bottom of

the unit.

• Press the MODE button repeatedly until the DRY operation LED

lights up. The fan speed switches over to low and both the fan

speed and the temperature cannot be adjusted.

SLEEP

Instruction manual

The SLEEP mode can be activated while using COOL or HEAT

modes.

In COOL mode

• Press the SLEEP button while the unit is in COOL mode.

• After 1 hour the pre-set temperature will increase by 1°C. After 2

hours it will increase again by 1°C.

In HEAT mode

• Press the SLEEP button while the unit is in HEAT mode.

• After 1 hour the pre-set temperature will decrease by 1°C. After 2

hours it will decrease again by 1°C, then the temperature will be

kept constant for 10 hours. During this time all the LED indicator

lights will be dimmed, the fan speed will switch over to low for

silent operating and the speed cannot be selected.

TIMER (1 - 24 hours)

The timer has 2 ways of operating-

To automatically turn the unit OFF.

• Press the TIMER button.

• Press the UP and DOWN buttons repeatedly to set the delay OFF

time.

To automatically turn the unit ON.

• Press the TIMER button.

• Press the UP and DOWN buttons repeatedly to set the delay ON

time.

To cancel the timer press the POWER button or press the DOWN

button repeatedly until the display shows ‘’’00’’.

Automatic defrost

Frost may build up in the evaporator during operations at low

temperatures. When this happens the unit will automatically start

defrosting and the POWER LED will start blinking.

• If in COOL operating mode the unit will stop operating for 10

minutes and automatically restart in COOL operating mode.

• If in HEAT or DRY operating mode the unit will shut down for 20

minutes then spend 5 minutes defrosting.

Overload protection

In the event of a power loss, the compressor will require 3 minutes

before restarting.

Drainage

Manual drainage

• The unit will shut down when the water needs to be drained,

when this happens unplug the unit from the power supply.

• Move the unit to a suitable place for emptying the water pan at

the bottom of the unit.

• Unplug the water plug. Let the water run out into a container. The

unit may be tilted slightly backward to help the water escape.

• Once emptied, plug back the water plug and ensure that it is well

fitted.

• Plug in and restart the unit.

Table of contents

Languages:

Other TriStar Air Conditioner manuals

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual