Tripp Lite B127A-4X2-BH2PH User manual
1
HDMI over Cat6
Matrix Switch Kits,
4K/60 Hz
2-Output Switch Kit: B127A-4X2-BH2PH
4-Output Switch Kit: B127A-4X4-BH4PH
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2022 Tripp Lite. All rights reserved.
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR®
surge protector in our monthly drawing!
tripplite.com/warranty
Owner’s Manual
Español 13 • Français 25 • Русский 37 • Deutsch 49
2
Product Features
• Transmit 4K video with audio from 4 HDMI source devices to 2 HDMI
displays (B127A-4X2-BH2PH) or 4 HDMI displays (B127A-4X4-BH4PH),
extend the signals up to 230 ft. from the sources, and switch between
sources
• Supports Ultra HD video resolutions up to 4K x 2K (3840 x 2160)
@ 60 Hz, as specified in HDMI 2.0, with 4:4:4 chroma subsampling
• Compatible with Tripp Lite B127A-Series receivers, such as
B127A-1A0-FH or B127A-1A0-BH (sold separately); Tripp Lite
B127A-1P0-PH receivers are included (2 with B127A-4X2-BH2PH;
4 with B127A-4X4-BH4PH)
• Supports High Dynamic Range (HDR) for richer contrast and expanded
color accuracy
• Complies with HDCP 2.2 standards to display up-to-date 4K video
content
• Multi-resolution support allows receivers to be used on any display that
supports 1080p, 4K/30 Hz or 4K/60 Hz without affecting the video
resolution of the other connected receiver
• Power over Cable (PoC) technology provides power to the connected
receivers via Cat6 cable
• Boost the signal distance between each source and display to a total
of 400 ft. by adding Tripp Lite B127A-010-H signal boosters (maximum
of 2 with B127A-4X2-BH2PH, 4 with B127A-4X4-BH4PH)
• Included mounting hardware allows the switch to be wall- , rack- or
pole-mounted
• Plug-and-play operation with no software required for easy, immediate
installation
3
Package Contents
Optional Accessories
• 2-Port or 4-Port Matrix Switch
• Pigtail Receiver Units (2x B127A-4X2-BH2PH or 4x B127A-4X4-BH4PH)
• External Power Supply
o B127A-4X2-BH2PH - Input: 100-240V, 50/60 Hz, 1.5A; Output: 24V 1A
o B127A-4X4-BH4PH - Input: 100-240V, 50/60 Hz, 1.5A; Output: 24V 2A
• IR Cable
• Remote Control
• Surface Mount Kit
• RS-232 Adapter
• Owner’s Manual
• N202-Series Cat6 24 AWG Solid Wire Ethernet Cables
• P569-XXX-CERT or P568-XXX-2A Series HDMI 2.0 Cables
• B127A-010-H Signal Booster
• B127A-1A0-BH Box-Style Receiver
• B127A-1A0-FH Face Plate Receiver
4
Disclaimer
Before installation, please check the following settings of your source(s)
and TV/monitor(s):
1. Set display(s) to 60 Hz. Double-check factory settings, as default can
be set to a lower frequency (Hz) than advertised.
2. Ensure the input setting of your monitor is set at HDMI 2.0. Some
displays may have default setting at HDMI 1.4.
3. Verify your monitor has the HDR feature enabled. Some displays may
have this feature disabled as a factory setting.
4. Check if the Ultra HD (UHD) Deep Color setting is enabled on your
display. Confirm with your display manufacturer which HDMI ports
support UHD Deep Color.
Note: To connect a local display to your installation, its UHD Deep Color setting may
need to be disabled to achieve 4K/60 Hz resolution.
5
The B127A-4X2-BH2PH and B127A-4X4-BH4PH include mounting
hardware that allows for a variety of mounting methods. The following
images illustrate how the included mounting brackets can be attached for
different installations.
Note: The model shown in the below images is for illustrative purposes only. Your
product may vary by model number, size or port orientation. The mounting options
for all over Cat6 units are the same.
Mounting Instructions
Wall-Mount
19” Rack-Mount Pole-Mount
ai162864491833_page_7.pdf 1 8/10/2021 8:21:58 PM
Wall-Mount
19" Rack-Mount Pole-Mount
6
B127A-4X2-BH2PH Installation
Notes:
• Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
• To achieve maximum distance and performance, use 24 AWG solid wire Cat6
cable. Using stranded wire Cat6 cable or cable with a gauge (AWG) size higher
than 24 AWG will result in shorter extension distance. Higher gauge cabling, such
as 26 AWG, has a more limited transmission capability than lower gauge cabling.
All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid wire cabling.
• The installation diagram shows a B127A-4X2-BH2PH kit, which includes a
quad-input/dual-output switch unit and two B127A-1P0-PH pigtail receiver units.
• External power is not required for remote receivers due to Power over Cable
(PoC) technology incorporated in the switch.
Installation
B127A-1P0-PH
B127A-4X2-BH2PH
Up to 230 ft. (70 m) Cat6 cable at 4K/60Hz
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60Hz
HDR PLAYER 4
HDR PLAYER 3
HDR PLAYER 2
HDR PLAYER 1
B127A-1P0-PH
IR Control
Pad
IR
SENSOR
RS-232
Scanner/optional
B127A-4X2-BH2PH
Up to 230 ft. (70 m) Cat6 cable at 4K/60 Hz
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz
HDR PLAYER 4
IR
SENSOR IR Control
Pad
HDR PLAYER 3
HDR PLAYER 2
HDR PLAYER 1
RS-232
Scanner/optional
7
1. Make sure all equipment in the installation—such as displays, HDR
players and the switch—is powered off.
2. Connect the HDMI sources to the input ports on the local switch with
user-supplied HDMI cables.
3. Optional: For extended range, connect up to two B127A-010-H signal
boosters between the switch and each receiver with user-supplied Cat6
cables.
4. Connect the RJ45 ports on the local switch to the RJ45 port on the
remote receivers with user-supplied Cat6 cable.
5. Connect the built-in HDMI connector on the receivers to the HDMI input
of the remote displays.
6. Turn on the power to your connected displays.
7. Connect the external power supply to the switch. Plug it into an
available wall outlet or a Tripp Lite surge protector, PDU or UPS system.
The Power (green) LED on the switch will illuminate to indicate the unit
is receiving power from the external power supply. The numbered HDMI
ports’ LEDs (green) will illuminate to indicate the ports are receiving
power.
8. Turn on the power to the HDMI source(s). The Output 1-2 (orange) LEDs
next to the port selection buttons will illuminate to indicate both ports
are receiving power and transmitting video to the connected receivers.
9. Connect the included IR cable to the IR Input port. Select the desired
source for the two outputs using the included remote control or the
push buttons located on the front of the switch.
10. The screen should now display the desired video on the connected
display(s).
Installation
8
Installation
B127A-4X4-BH4PH Installation
Notes:
• Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
• To achieve maximum distance and performance, use 24 AWG solid wire Cat6
cable. Using stranded wire Cat6 cable or cable with a gauge (AWG) size higher
than 24 AWG will result in shorter extension distance. Higher gauge cabling, such
as 26 AWG, has a more limited transmission capability than lower gauge cabling.
All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid wire cabling.
• The installation diagram shows a B127A-4X4-BH4PH kit, which includes a
quad-input/quad-output switch unit and four B127A-1P0-PH pigtail receiver units.
• External power is not required for remote receivers due to Power over Cable (PoC)
technology incorporated in the switch.
B127A-1P0-PH
B127A-1P0-PH
B127A-1P0-PH
B127A-4X4-BH4PH
Up to 230 ft. (70 m) Cat6 cable at 4K/60Hz
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60Hz
HDR PLAYER 4
HDR PLAYER 3
HDR PLAYER 2
HDR PLAYER 1
B127A-1P0-PH
IR Control
Pad
IR
SENSOR
RS-232
Scanner/optional
B127A-4X4-BH4PH
Up to 230 ft. (70 m) Cat6 cable at 4K/60 Hz
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz
HDR PLAYER 4
IR
SENSOR IR Control
Pad
HDR PLAYER 3
HDR PLAYER 2
HDR PLAYER 1
RS-232
Scanner/optional
9
Installation
1. Make sure all equipment in the installation—such as displays, HDR
players and the switch—is powered off.
2. Connect the HDMI sources to the input ports on the local switch with
user-supplied HDMI cables.
3. Optional: For extended range, connect up to four B127A-010-H signal
boosters between the switch and each receiver with user-supplied Cat6
cables.
4. Connect the RJ45 ports on the local switch to the RJ45 port on the
remote receivers with user-supplied Cat6 cable.
5. Connect the built-in HDMI connector on the receivers to the HDMI input
of the remote displays.
6. Turn on the power to your connected displays.
7. Connect the external power supply to the switch. Plug it into an
available wall outlet or a Tripp Lite surge protector, PDU or UPS system.
The Power (green) LED on the switch will illuminate to indicate the unit
is receiving power from the external power supply. The numbered HDMI
ports’ LEDs (green) will illuminate
to indicate the ports are receiving power.
8. Turn on the power to the HDMI source(s). The Output 1-4 (orange) LEDs
next to the port selection buttons will illuminate to indicate both ports
are receiving power and transmitting video to the connected receivers.
9. Connect the included IR cable to the IR Input port. Select the desired
source for the four outputs using the included remote control or the
push buttons located on the front of the switch.
10. The screen should now display the desired video on the connected
display(s).
10
RS-232 Serial Control
Before using RS-232 Serial Control, you must first access the Terminal
Emulation Software and update the COM port settings.
1 Go to the Setup drop-down menu and select the Serial Port option.
2 Select the COM port that is being used, and update the remaining
settings as follows: Baud Rate (9600), Data (8 bit), Parity (none), Stop
(1 bit), Flow Control (none).
This manual suits for next models
1
Table of contents
Languages:
Other Tripp Lite Switch manuals
Tripp Lite
Tripp Lite NetCommander B070-008-19-IP User manual
Tripp Lite
Tripp Lite B002-DP1AC2-N4 User manual
Tripp Lite
Tripp Lite U460-003-3AG User manual
Tripp Lite
Tripp Lite NetCommander B072-016-IP2 User manual
Tripp Lite
Tripp Lite N252-048-SH-K User manual
Tripp Lite
Tripp Lite NetDirector B022-U08-IP Installation guide
Tripp Lite
Tripp Lite B005-DPUA4 User manual
Tripp Lite
Tripp Lite B034-002-R User manual
Tripp Lite
Tripp Lite NetDirector B064-016-04-IP User manual
Tripp Lite
Tripp Lite U223-004-IND User manual
Tripp Lite
Tripp Lite U224-4R4-R User manual
Tripp Lite
Tripp Lite B119-302-R User manual
Tripp Lite
Tripp Lite B004-008 User manual
Tripp Lite
Tripp Lite B119-4X1-MV User manual
Tripp Lite
Tripp Lite B64-032-04-IPG User manual
Tripp Lite
Tripp Lite B002-DUA2 User manual
Tripp Lite
Tripp Lite U227-FT3-R User manual
Tripp Lite
Tripp Lite WEXT5-B060-032 User manual
Tripp Lite
Tripp Lite NetDirector B064-032-04-IPG Configuration guide
Tripp Lite
Tripp Lite NetDirector B030-DP08-17DIP User manual
