TRENDnet TPE-S80 User manual

TPE-S80

1.01

Quick Installation Guide

Table of Contents

Version 04.06.2010

English 1

1. Before You Start

2. 1

LEDs 2

3. Hardware Installation 3

echnical Specifications 7

Troubleshooting 8

1. Before You Start

Package Contents

?TPE-S80

?Multi-Language Quick Installation Guide

?Power cord

?Rackmount Kit

?Rubber Feet

System Requirements

?Computer with Network adapter installed

?RJ-45 Network Cable

?The surface must support at least 1.5 Kg for the Switch

?The power outlet should be within 1.82 meters (6 feet) of the Switch

?Make sure that there is proper heat dissipation from and adequate ventilation

around the Switch

?Do not place heavy objects on the Switch

?IEEE 802.3af Powered Device

?TPE-112S (Optional)

?EIAstandard 19” rack (Optional)

Note: TheTPE-S80 only supports Powered Devices that follow the

IEEE 802.3af standard

2. LEDs

Link/ACT

Green(Solid):Linktoanotherdevice

Green(Blinking):Activityisoccurringfromthelink

Not Illuminated: No valid network connection on

the port.

PoE

Amber:LinktoPoEdevice

NotIlluminated:NoPoEdeviceisconnected

Power

Amber:Powerison

NotIlluminated:Powerisoff

3. Hardware Installation

2. Move the Power switch to the on position.

1. Connect the Power Cord to the TPE-S80 and

then to a power outlet.

3. Connect a RJ-45 network cable from the

computer to an available Ethernet port on the

TPE-S80.

5. Verify that the following panel lights are on:

Power, PoE and Link/ACT.

4. Connect a RJ-45 cable from a PoE port (1~8)

on the TPE-S80 to the LAN port of the PoE

device (e.g. TEW-638PAP)

Note: Take note of the output power for your non-PoE device.The TPE-112GS only

supports non-PoE devices with an out put power of 5V, 7.5V, 9V or 12V.

Using a non-PoE device with the TPE-S80 and the TPE-112GS PoE Splitter

1. Select the proper voltage (5V, 7.5V, 9V or 12V).

2. Connect an Ethernet cable from a PoE port

on the TPE-S80 switch to the PoE IN port on

the TPE-112GS.

4. Connect the provided Jumper cable to the

non-PoE device (e.g. TEW-639GR) and to the

TPE-112GS.

3. Connect the built-in Ethernet cable (Data Out)

on the TPE-112GS to the non-PoE device's

LAN port (e.g. TEW-639GR).

5. Verify that the following panel lights are on:

Power, PoE and Link/ACT.

The Switch can be mounted in an EIAstandard-size, 19-inch rack, which can be placed

in a wiring closet with other equipment.

Rack Mount

1. Attach the mounting brackets to both sides of

the chassis and secure them with the provided

screws.

2. Carefully position the chassis onto the rack.

Align the bracket to the screw holes on the

rack, then use the screws provided with the

equipment rack to mount the chassis.

Technical Specifications

Hardware

Standard

?IEEE 802.3 10Base-T

?IEEE802.3u 100Base-TX

?IEEE 802.3af Power over Ethernet

?IEEE 802.3x Flow Control

8 x 10/100MbpsAuto-MDIX PoE ports

On/Off power switch

?Ethernet: 10/20Mbps (half/full duplex)

?Fast Ethernet: 100/200Mbps (half/full duplex)

512Kbits

1K MAC entries

1.6Gbps

100~240VAC 50/60Hz, internal universal switching power

Power, Link/Activity, PoEAct/Status

?6 Watts max. (no Power Device (PD) connected)

?132 Watts max. (8 x 15.4 watts PoE devices connected)

?Operating: 0°~ 45°C (32°~ 113°F)

?Storage: -10°~ 70°C (14°~ 158°F)

Ports

Power Switch

Data Transfer Rates

Data RAM Buffer

Address Table

Switch Fabric

Power

Diagnostic LEDs

Power Consumption

Temperature

10%- 95% (non-condensing)

266 x 160 x 44 mm (10.5 x 6.3 x 1.73 in.)

1.4 kg (3.1 lb)

CE, FCC

?Up to 15.4 watts per port; PD classification

?Polymer switch for short protection

?PoE: pin 3,6 for power (+) and pin 1,2 for power (-)

Humidity

Dimensions

Certifications

Weight

PoE

Power over Ethernet

Troubleshooting

1.After connecting the Switch to a power outlet, the LEDs do not turn on.

1. Check the connection of the power cord to the TPE-S80 and the power outlet.

2. Verify that the power switch is set to the On position.

3. Check that the power outlet is receiving power.

2.After I connect my PCs to the Switch, I am unable to share files.

1. Check the LEDs on the Switch. Make sure the Link/ACT LED is on.

2. Check the network cable. The minimum length of the cable is 1.5 meters and

the maximum length of the cable is 100 meters.

3. Disable any software firewall program.

4. Verify that you have file sharing enabled. Please contact your Operating

System support for more information.

3.After I connect my PCs to the Switch, I can only get onto the Internet from one

computer.

The Switch was not designed to share Internet between multiple computers. You

need to get an Internet router such as the TW100-S4W1CA.

4. My 802.3af Powered Device does not power on when I plug the device into the

Switch. What should I do?

1. Verify that the PoE device supports IEEE 802.3af protocol.

2. Verify that the power switch is set to the on position.

3. Power cycle the PoE switch. Unplug power to the Switch, wait 15 seconds,

then plug the power back in.

4. Plug the device into a different port on the PoE switch.

5. Try using another RJ-45 network cable.

5. Where is the uplink port located on the Switch?

Since all the ports on the Switch areAuto-MDIX, any of the ports can be used as

an uplink port.

If you still encounter problems or have any questions regarding the TPE-S80 please

contact Trendnet's Technical Support Department.

Other manuals for TPE-S80

Table of contents

Other TRENDnet Switch manuals

TRENDnet

TRENDnet TE100-S16plus User manual

TRENDnet

TRENDnet TO-PG541 User manual

TRENDnet

TRENDnet TE100-S5 User manual

TRENDnet

TRENDnet TK-204UK - DVI USB KVM Switch User manual

TRENDnet

TRENDnet TPE-T80H User manual

TRENDnet

TRENDnet TEG-S811Fi User manual

TRENDnet

TRENDnet TE100-S55E User manual

TRENDnet

TRENDnet TEG-448WS - Switch User manual

TRENDnet

TRENDnet TK-215i User manual

TRENDnet

TRENDnet TEG-S3000I - TEG Gigabit Layer 2 Managed Chassis S3000i... User manual

TRENDnet

TRENDnet TE100-S16V User manual

TRENDnet

TRENDnet TPE-S50 User manual

TRENDnet

TRENDnet TK-210K User manual

TRENDnet

TRENDnet TEG-S50ES User manual

TRENDnet

TRENDnet TU3-H4E User manual

TRENDnet

TRENDnet TPE-P521ES User manual

TRENDnet

TRENDnet TK-205K - PS/2 KVM Switch User manual

TRENDnet

TRENDnet TK-801R User manual

TRENDnet

TRENDnet TE100-S88 User manual

TRENDnet

TRENDnet TK-1601R User manual

TRENDnet

TRENDnet TEG-S081Fi User manual

TRENDnet

TRENDnet TU-400E User manual

TRENDnet

TRENDnet TK-802R User manual

TRENDnet

TRENDnet TK-804R User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual