Totally Wicked Active User manual

USER MANUAL

THE TOTALLY WICKED ACTIVE

TOTALLY WICKED

ACTIVE

ELECTRONIC

CIGARETTE KIT

CONGRATULATIONS

ON PURCHASING YOUR

Charging

Port

Display Screen

Power

Button

Tank Connection

Adjustment

Buttons

Speaker Pause/Play

Button

Speaker

Power Button

Volume/Music

Control Buttons

Mouthpiece

Top Cap

Atomizer

Head

Airﬂow

Control

Ring

Acrylic

Sleeve

Tank Base

4 5

For those familiar with Wireless speakers, the steps below can be followed to allow

the device to be used in the shortest possible time:

• Press the speaker power button – the device will begin scanning for Wireless

devices

• Turn on the Wireless connection on your selected device and pair with the

“ACTIVE”

• Select the music you wish to play on your selected device

• Charge the battery (it may not have been shipped with a full charge)

Detailed descriptions of these steps and more are given in the full user guide.

For those familiar with e-cigarettes, the steps below can be followed to allow the

device to be used in the shortest possible time:

• Prime the atomizer head

• Fill the tank

• Switch the Active on

• Set the Active to wattage mode

• Check the power setting (we suggest 15 watts with the 1.3ohm atomizer head)

• Press the power button and inhale

• Charge the battery (it may not have been shipped with a full charge)

QUICK START GUIDE QUICK START GUIDE (WIRELESS SPEAKER)

6 7

Note: It is important to “prime” a new

atomizer head before ﬁrst use. Failure

to do so can cause the atomizer coil to

overheat, leading to an unpleasant taste

and sometimes irreversible damage

to the atomizer head requiring early

replacement.

Remove the tank from the battery.

Turn the Active tank upside down and

unscrew the atomizer base from the

clear acrylic section of the tank.

Prime the ﬁtted atomizer head by

slowly dripping e-liquid onto the cotton,

avoiding dripping e-liquid directly

down the centre of the atomizer head.

Continue to slowly drip e-liquid onto the

cotton until the cotton visible through

the sides of the atomizer head appears

to be saturated. Reﬁt the atomizer base

onto the clear acrylic section of the tank

then screw the assembled tank back

onto the Active battery. Fill the tank.

PRIMING THE ATOMIZER HEAD PRIMING THE ATOMIZER HEAD

8 9

E-liquid Level

To avoid the atomizer head becoming

dry and burning prematurely, ensure

the e-liquid level does not drop below

half way down the acrylic section of

the tank.

Atomizer Head Lifespan

Atomizer heads do not last forever and

need to be periodically replaced. The

lifespan of an atomizer head can vary

from several days up to several weeks.

Factors affecting lifespan include

wattage, vaping style, ﬂavour and type

of e-liquid. Indicators that the atomizer

head may require replacement include

a slight burnt taste, general loss of

vapour production or a reduction in

ﬂavour intensity.

Slide the top cap open by

pushing ﬁrmly in the direction

indicated by the arrow on the

top cap to expose the ﬁll hole.

Insert the ﬁlling nozzle into the

ﬁll hole and ﬁll the tank, being

careful to leave an air gap of

approximately 2mm. Slide the

top cap shut after ﬁlling.

FILLING THE TANK USING YOUR ACTIVE KIT

10 11

wattage settings will give a cooler and

less dense vapour than higher power

settings, higher power settings will

produce larger clouds of vapour but too

much power can lead to poor ﬂavour,

or even a burnt taste in the vapour.

Experiment to ﬁnd your preference.

Tip: Long pressing either of the

adjustment buttons allows quicker

changes to the wattage.

Vaping

Press and hold the power button as you

inhale the vapour.

Atomizer Head Protection

If the power button is held down for

longer than 10 seconds while vaping

the screen will display “Over 10s

protection” and the Active will refuse to

power or produce any vapour. Release

the power button to allow normal

operation to return.

Powering On and Off

To switch the Active on, quickly press

the power button 5 times. The screen

will activate indicating that the device

is powered on. To turn the Active off,

quickly press the power button 5 times.

Setting the Mode and Wattage

The atomizer heads supplied with the

Active are compatible with wattage

mode only, and will not work in

temperature control modes. To set the

Active to wattage mode, quickly press

the power button 3 times to enter the

mode selection menu, the screen will

display your current mode. Press either

adjustment button until you have found

“Wattage”, press the power button

once to conﬁrm your selection. Lower

USING YOUR ACTIVE KIT USING YOUR ACTIVE KIT

12 13

Weak Battery Alert

If the battery cannot supply your desired

wattage the screen will display “WEAK

BATTERY” and the wattage will be

adjusted automatically to the maximum

which can be supplied. Charge the

Active using the steps outlined in

Charging the Battery below to allow

normal operation to resume.

Battery Low

Once the Active battery completely

depletes, the indicator on the screen

will begin to ﬂash. If the Active is used

while the battery indicator is ﬂashing,

the screen will state “BATTERY LOW”

pressing the button again will result in

the screen displaying “BATTERY LOW

LOCK!” Charge the Active using the

steps outlined in Charging the Battery

below to allow normal operation to

resume.

Adjusting the Airﬂow

If you ﬁnd the airﬂow too airy or

too restrictive while vaping, it can

be adjusted by rotating the airﬂow

control ring located on the atomizer

base. Experiment to ﬁnd your

preferred setting.

USING YOUR ACTIVE KIT USING YOUR ACTIVE KIT

14 15

Stealth Mode

If stealth mode is enabled, the display

will not activate while pressing the

power button to vape. The display will

still activate whenever the adjustment

buttons are pressed to make changes

to wattage or change modes, or if the

power button is pressed brieﬂy. To

enable or disable stealth mode, ensure

the Active is powered on, then press

and hold the power button and left

adjustment button at the same time.

The screen will display “STEALTH

ON” if enabled and “STEALTH OFF” if

disabled.

Key Lock Mode

Key lock mode prevents accidental

changes to the wattage or temperature

settings. To enable or disable key lock

mode, ensure the Active is powered on,

then press and hold both adjustment

buttons at the same time to enable or

disable key lock mode. The screen will

Charging the Battery

The Active is charged by connecting

the charge port located beneath the

adjustment buttons to a USB port or

suitable wall adaptor with the charging

lead supplied. The silicone plug

covering the charge port will need to

be ﬂipped down before connecting

a charger. The battery indicator will

display a lightning bolt while charging,

and after a few minutes the screen will

display an icon showing a battery being

charged.

Replacing the Atomizer Head

To replace the atomizer head, remove

the Active tank from the Active battery

by unscrewing at the atomizer base.

Turn the tank upside down, then

unscrew the atomizer base from the

acrylic section of the tank. Unscrew

the atomizer head from the atomizer

base and replace. After following the

instructions in “Priming the Atomizer

Head”, reassemble the tank and screw

the assembled tank back onto the

Active battery.

USING YOUR ACTIVE KIT SETTINGS

16 17

Bypass Mode:

Bypass mode provides an effectively

direct connection between the device’s

battery and the atomizer. As the battery

depletes, the device supplies less

power to the tank. To enter bypass

mode, ensure the Active is turned on

and quickly press the power button 3

times. Use either adjustment button to

scroll until “Bypass” is displayed and

press the power button to conﬁrm.

Rotating the Display:

To rotate the display by 180°, turn the

Active off then press and hold both

adjustment buttons at the same time.

Turn the Active back on.

display “KEY LOCK” when enabled

and “KEY UNLOCK” when disabled. If

key lock mode is enabled the screen

will display “KEY LOCK” when the

adjustment buttons are pressed.

Adjustments cannot be made until the

key lock has been disabled.

Switch between Current,

Puff Counter or Total Time

Vaping Displayed

Ensure the Active is powered on, press

and hold the power button and the right

adjustment button. The bottom icon will

begin to ﬂash, use either adjustment

button to ﬁnd the icon wanted and

press the power button to conﬁrm your

selection.

Note: you can reset the puff counter

and total time vaping to zero by holding

down both adjustment buttons while the

respective icon is ﬂashing.

SETTINGS SETTINGS

18 19

Note: The atomizer heads supplied

with the Active kit are compatible with

wattage mode only, and will not work in

temperature control mode.

Adjusting Wattage in

Temperature Control/TCR Modes

The maximum wattage that is applied

in Temperature Control or TCR modes

can be adjusted. Higher wattages allow

the target temperature to be reached

quicker, while lower wattages increase

the time taken to reach the target

temperature. Setting the wattage too

low may prevent the target temperature

from being reached at all. To adjust

the maximum wattage, quickly press

the power button 4 times to enter the

wattage adjustment screen. Increase or

decrease the wattage until the desired

wattage is reached, press the power

button once to conﬁrm the selection.

Switching to Temperature

Control Vaping Modes

Temperature Control vaping modes

can be used only when speciﬁc coil

materials have been used for atomizer

head manufacture, generally nickel (Ni),

titanium (Ti) or stainless steel (SS).

To select the appropriate temperature

control mode, quickly press the power

button 3 times to enter the mode

selection menu; Then press either

adjustment button to cycle between the

modes of wattage, bypass, temperature

(Ni, Ti, SS) or temperature (M1, M2,

M3). Press the power button once to

conﬁrm the selection.

Only atomizer heads with coils made

from nickel, titanium or “316” stainless

steel are compatible with temperature

control mode. Select the appropriate

mode to match your atomizer type.

TEMPERATURE CONTROL SETTINGS TEMPERATURE CONTROL SETTINGS

Table of contents

Other Totally Wicked Electronic Cigarette manuals

Totally Wicked

Totally Wicked Skope S User manual

Totally Wicked

Totally Wicked Corsa 200 User manual

Totally Wicked

Totally Wicked PENGUIN User manual

Totally Wicked

Totally Wicked Tornado EX2 User manual

Totally Wicked

Totally Wicked ARC PICO BABY User manual

Totally Wicked

Totally Wicked AURA User manual

Totally Wicked

Totally Wicked Buzz User manual

Totally Wicked

Totally Wicked MAG-OID User manual

Totally Wicked

Totally Wicked TORNADO XS User manual

Totally Wicked

Totally Wicked Resolve 2 User manual

Totally Wicked

Totally Wicked Pipe X User manual

Totally Wicked

Totally Wicked Curve User manual

Totally Wicked

Totally Wicked Tornado II Slim User manual

Totally Wicked

Totally Wicked Curve VT60 User manual

Totally Wicked

Totally Wicked arc Nano User manual

Totally Wicked

Totally Wicked aio2 User manual

Totally Wicked

Totally Wicked ARC GTI User manual

Totally Wicked

Totally Wicked GRIP User manual

Totally Wicked

Totally Wicked ARC 5 User manual

Totally Wicked

Totally Wicked Odyssey User manual

Totally Wicked

Totally Wicked Arc pico grande User manual

Totally Wicked

Totally Wicked eGo-C+ User manual

Totally Wicked

Totally Wicked Revolution S User manual

Totally Wicked

Totally Wicked Corsa Mini User manual

Popular Electronic Cigarette manuals by other brands

STEAMAX

STEAMAX TFV8 X-BABY user manual

iQOS

iQOS 3 MULTI user guide

Vaporesso

Vaporesso LUXE XR MAX user manual

ZAZO

ZAZO PRO Mini 2 user manual

Aquafog

Aquafog Turbo XE User's manual and operating instructions

Electronic Cigarettes Australia Pty Ltd

Electronic Cigarettes Australia Pty Ltd AUSSIE BLUE ENDURANCE user manual

UWELL

UWELL Whirl T1 user manual

VooPoo

VooPoo VMATE instruction manual

Yogs-Pfeifen

Yogs-Pfeifen E-PIPE nex KLASSIK manual

TSI Instruments

TSI Instruments 3075 instruction manual

Vaporesso

Vaporesso GTX ONE user manual

VooPoo

VooPoo DRAG 2 user manual

Innova

Innova 3.0 instructions

Aquafog

Aquafog XE CRSM user manual

hi-Fun

hi-Fun hi-Cigarette user manual

Neptronic

Neptronic SKH Series user guide

Vaporesso

Vaporesso LUXE Q2 SE user manual

iQOS

iQOS 3 DUO user manual