THORLABS BPC303 User manual

HA0247T

BPC303

Benchtop Piezo Controllers

User Guide

Original Instructions

Page -1 22883-D03

Three-Channel Piezo Controller, 75 V to 150 V

Contents

Chaper 1 Overview ..................................................................................................... 1

1.1 Introduction ........................................................................................ 1

1.2 PC Software Overview ....................................................................... 3

1.2.1 Introduction ............................................................................................. 3

1.2.2 Kinesis Server ......................................................................................... 3

1.2.3 Software Upgrades ................................................................................. 4

Chaper 2 Safety .......................................................................................................... 5

2.1 Safety Information ............................................................................. 5

2.2 General Warnings .............................................................................. 5

Chaper 3 Set Up .......................................................................................................... 6

3.1 Installing the Software ....................................................................... 6

3.2 Mechanical Installation ...................................................................... 7

3.2.1 Siting ....................................................................................................... 7

3.2.2 Environmental Conditions ....................................................................... 7

3.3 Electrical Installation ......................................................................... 8

3.3.1 Connecting To The Supply ..................................................................... 8

3.3.2 Fuses ...................................................................................................... 8

3.3.3 Powering Down The Unit ........................................................................ 8

3.3.4 Rear Panel Connections ......................................................................... 9

3.4 Front Panel Controls and Indicators .............................................. 11

3.5 Button Operation ............................................................................. 12

3.5.1 Resolution Button .................................................................................. 12

3.5.2 Zero Button ........................................................................................... 12

3.5.3 Max Voltage Button ............................................................................... 13

3.6 Control Potentiometer Operation ................................................... 13

3.6.1 Moving the Piezo using the ‘Control’ Potentiometer ............................. 13

3.7 Adjusting the Display Brightness .................................................. 14

3.8 Connecting The Hardware .............................................................. 14

3.9 Verifying Software Operation ......................................................... 15

3.9.1 Initial Setup ........................................................................................... 15

Rev F Dec 2018 Page 0

Chaper 4 PC C Operation - Tutorial ....................................................................... 16

4.1 Introduction ...................................................................................... 16

4.2 Using the Kinesis Software ............................................................. 16

4.3 Setting the Position Sensor Zero .................................................... 18

4.4 Moving the Piezo .............................................................................. 18

4.4.1 Entering the piezo position ................................................................... 18

4.4.2 Jogging the Piezos ............................................................................... 19

4.5 Using the Controller as a Piezo Amplifier ...................................... 20

4.6 Choice of Display Mode ................................................................... 20

4.7 Thermal Shutdown ........................................................................... 21

4.8 Using the Controller with a Force Sensor ...................................... 21

4.9 Using the MZF001 Joystick ............................................................. 22

4.10 Load Response ................................................................................. 24

Chaper 5 Software Reference .................................................................................. 25

5.1 GUI Panel .......................................................................................... 25

5.2 Settings Panel ................................................................................... 26

5.2.1 Persisting Settings to the Hardware ..................................................... 26

5.2.2 Control tab. ........................................................................................... 27

5.2.3 Advanced Tab ...................................................................................... 28

Appendices

Appendix A Rear Panel Connector Pinout Details .................................... 30

Appendix B Preventive Maintenance ......................................................... 36

Appendix C Specifications and Associated Parts 3 .................................. 37

Appendix D Piezo Operation - Background ............................................... 39

Appendix E Regulatory ................................................................................ 42

Appendix F Thorlabs Worldwide Contacts ................................................ 44

Page 1 22883-D03

Three-Channel Piezo Controller, 75 V to 150 V

Chapter 1 Overview

1.1 Introduction

This controller is designed for use in critical alignment applications where nanometer

level motion control is required. These high power units deliver up to 150V/1A per

channel and are compatible with all piezo-actuated nanopositioning actuators &

stages in the Thorlabs range.

The unit combines the latest highspeed digital signal processors (DSP) with low-noise

analog electronics for effortless one-, two- or three-axis motion. Additional axes can

be driven by connecting one or more benchtop units via a standard USB hub.

Manual controls are located on the front face of the unit to allow manual adjustment

of the piezo position using the digitally encoded adjustment pot. The display is easy

to read and can be set to show either applied voltage or position in microns. Open or

closed loop control and zeroing of the piezo can also be selected from the front panel.

Fig. 1.1 Three Channel Piezo Controller (BPC303)

The controller is supplied with a full suite of software support tools. An intuitive

graphical instrument panel allows immediate control and visualization of the operation

of the piezo controller, and any other controllers that are installed in the system. See

Section 1.2. for a full description of the software.

The piezo unit operation is fully configurable (parameterized) with key settings

exposed through the associated graphical interface panel. Open or closed loop

operating modes can be selected 'on the fly', and in both modes the display can be

changed to show drive voltage or position (in microns). In the closed loop operation

mode, both the P & I (proportional and integral) components of the feedback control

loop can be altered to adjust the servoloop response. For convenience and ease of

use, adjustment of many key parameters is possible through direct interaction with the

Rev F Dec 2018 Page 2

Chapter 1 Overview

graphical panel. For example, the output drive voltage or position can be adjusted by

entering a value in the display window (see the tutorial in Chapter 4 for further details).

Note that all such settings and parameters are also accessible through the

programmable interfaces which allow the user to build automated alignment routines.

See Section 1.2. for a full description of the Kinesis software.

The key innovation of the Thorlabs range of controllers and associated mechanical

products is the ease and speed with which complete automated alignment systems

can be engineered at both the hardware and software level. All controllers in the

range are equipped with USB connectivity. The 'multi-drop' USB bus allows multiple

units to be connected to a single controller PC using commerical USB hubs and

cables. When planning an alignment application, simply add up the number and type

of drive channels required and connect together the associated number of

controllers. In the remainder of this handbook, the Tutorial section (Chapter 4)

provides a good initial understanding on using the unit, and the reference section

(Chapter 5) covers all operating modes and parameters in detail.

Page 3 22883-D03

Three-Channel Piezo Controller, 75 V to 150 V

1.2 PC Software Overview

1.2.1 Introduction

The BPC303 piezo controllers feature USB connectivity (allowing multiple units to be

used together on a single PC), fully featured Graphical User Interface (GUI) panels,

and extensive software function libraries for custom application development.

The Kinesis software suite provides a flexible and powerful PC based control system

both for users of the equipment, and software programmers aiming to automate its

operation.

The User Interface allows full control of all settings and operating modes enabling

complete ‘out-of-box’ operation without the need to develop any further custom

software. It provides all of the necessary system software services such as generation

of GUI panels, communications handling for multiple USB units, and logging of all

system activity to assist in hardware trouble shooting. The Kinesis server is also used

by software developers to allow the creation of advanced automated positioning

applications very rapidly and with great ease. The server is described in more detail

in the following section.

1.2.2 Kinesis Server

With the Kinesis system, .Net Controls are deployed to allow direct control over (and

also reflect the status of) the range of electronic controller units, including the Piezo

controller. Software applications that use .Net Controls are often referred to as 'client

applications'. A .Net Control is a language independent software component.

Consequently the controls can be incorporated into a wide range of software

development environments for use by client application developers. Development

environments supported include Visual Basic, Labview, Visual C++, C++ Builder,

HPVEE, Matlab, VB.NET, C#.NET

and, via VBA, Microsoft Office applications such as

Excel and Word.

Consider the control supplied for the BPC303 controller.

The system provides a separate control for each piezo drive channel to allow the

piezo unit to be manually operated, as well as a complete set of software functions to

allow all parameters to be set and operations to be automated by a client application.

The instrument panel reflects the current operating state of the driver unit to which it

is associated (e.g. such as piezo drive voltage). Updates to the panel take place

automatically when a user (client) application is making software calls into the same

Rev F Dec 2018 Page 4

Chapter 1 Overview

Control. For example, if a client application instructs the associated Piezo Control to

move an actuator, the progress of that move is reflected automatically by changing

position readouts on the graphical interface, without the need for further programming

intervention.

The Kinesis Controls collection provides a rich set of graphical user panels and

programmable interfaces allowing users and client application developers to interact

seamlessly with the Kinesis hardware. Each of the Kinesis controllers has an

associated .Net Control and these are described fully in the handbooks associated

with the controllers.

Fig. 1.2 System Architecture Diagram

Refer to the main Kinesis Software online help file, for a complete programmers

guide. This is available either by pressing the F1 key when running the Kinesis server,

or via the Start menu, Start\Programs\Thorlabs\Kinesis\Kinesis Help.

1.2.3 Software Upgrades

Thorlabs operate a policy of continuous product development and may issue software

upgrades as necessary.

Page 5 22883-D03

Three-Channel Piezo Controller, 75 V to 150 V

Chapter 2 Safety

2.1 Safety Information

For the continuing safety of the operators of this equipment, and the protection of the

equipment itself, the operator should take note of the Warnings, Cautions and Notes

throughout this handbook and, where visible, on the product itself.

The following safety symbols may be used throughout the handbook and on the

equipment itself.

2.2 General Warnings

Warning: Risk of Electrical Shock

Given when there is a risk of injury from electrical shock.

Warning

Given when there is a risk of injury to users.

Caution

Given when there is a risk of damage to the product.

Note

Clarification of an instruction or additional information.

Warning

If this equipment is used in a manner not specified by the manufacturer, the

protection provided by the equipment may be impaired. In particular, excessive

moisture may impair operation.

Spillage of fluid, such as sample solutions, should be avoided. If spillage does

occur, clean up immediately using absorbant tissue. Do not allow spilled fluid to

enter the internal mechanism.

The equipment is for indoor use only.

The equipment is not designed for use in an explosive atmosphere.

Rev F Dec 2018 Page 6

Chapter 3 Set Up

3.1 Installing the Software

DO NOT CONNECT THE CONTROLLER TO YOUR PC YET

1) Go to Services/Downloads at www.thorlabs.com and download the Kinesis

Software.

2) Run the .exe file and follow the on-screen instructions.

Caution

If your PC becomes unresponsive (e.g due to an operating system problem,

entering a sleep state condition, or screen saver operation) for a prolonged

period, this will interrupt communication between the software and the

hardware, and a communications error may be generated. To minimize the

possibility of this happening it is strongly recommended that any such modes

that result in prolonged unresponsiveness be disabled before the software is

run. Please consult your system administrator or contact Thorlabs technical

support for more details.

Caution

Some PCs may have been configured to restrict the users ability to load

software, and on these systems the software may not install/run. If you are in

any doubt about your rights to install/run software, please consult your system

administrator before attempting to install. If you experience any problems when

installing software, contact Thorlabs on +44 (0)1353 654440 and ask for

Technical Support.

Page 7 22883-D03

Three-Channel Piezo Controller, 75 V to 150 V

3.2 Mechanical Installation

3.2.1 Siting

The unit is designed to be mounted free standing on a shelf, benchtop or similar

surface.

3.2.2 Environmental Conditions

Location Indoor use only

Maximum altitude 2000 m

Temperature range 5oC to 40oC

Maximum Humidity Less than 80% RH (non-condensing) at 31°C

To ensure reliable operation the unit should not be exposed to corrosive agents or

excessive moisture, heat or dust.

If the unit has been stored at a low temperature or in an environment of high humidity,

it must be allowed to reach ambient conditions before being powered up.

Caution

When siting the unit, it should be positioned so as not to impede the operation

of the rear panel power supply switch.

Ensure that proper airflow is maintained to the rear of the unit.

Warning

Operation outside the following environmental limits may adversely affect

operator safety.

Caution

In applications requiring the highest level of accuracy and repeatability, it is

recommended that the controller unit is powered up approximately 30 minutes

before use, in order to allow the internal temperature to stabilize.

Table of contents

Other THORLABS Controllers manuals

THORLABS

THORLABS KSC101 User manual

THORLABS

THORLABS TLD001 User manual

THORLABS

THORLABS KIM001 User manual

THORLABS

THORLABS KST101 User manual

THORLABS

THORLABS BBD102 User manual

THORLABS

THORLABS IP250-BV User manual

THORLABS

THORLABS K-Cube Piezo Controller User manual

THORLABS

THORLABS Z8 Series User manual

THORLABS

THORLABS K-Cube Piezo Controller User manual

THORLABS

THORLABS BBD202 User manual

THORLABS

THORLABS LDC40 Series User manual

THORLABS

THORLABS K-Cube KLC101 User manual

THORLABS

THORLABS BBD201 User manual

THORLABS

THORLABS DRV001 User manual

THORLABS

THORLABS NanoTrak KNA-IR User manual

THORLABS

THORLABS ITC1 Series User manual

THORLABS

THORLABS TSC001 User manual

THORLABS

THORLABS BSC202 User manual

THORLABS

THORLABS PCS-6000 Series User manual

THORLABS

THORLABS PTC1 User manual

THORLABS

THORLABS BSC202 User manual

THORLABS

THORLABS ORIC PDXC2 User manual

THORLABS

THORLABS MCM3000 Series User manual

THORLABS

THORLABS LDC200C series User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual