ThermTec Vidar Series User manual
Thermal Imaging Scope
Vidar Series
User Manual
Vidar335/Vidar360/Vidar635/Vidar660
Vidar335L/Vidar360L/Vidar635L/Vidar660L
Model No.:
Thermal Imaging
Vidar Series
Table of Contents
Important Safety Information
1. Introduction
2. Features
3. Specifications
4. Packing List
5. Appearance of Vidar
6. Buttons and Controls
7. Installation Guide
7.1 Battery Installation
7.2 Picatinny Rail Installation
8. Operation Guide
8.1 Power on and Image Calibration
8.2 Pseudo Color Switch
8.3 Turning off the Device
8.4 Standby Mode
8.5 Diopter Adjustment
8.6 Objective Lens Focusing
8.7 FOV Selection and Shift
4
6
6
7
9
10
12
13
13
13
13
13
13
14
14
14
14
14
9. Digital Zoom
10. Shortcut Menu
11. Status Bar
12. Memory Access
13. Main Menu
14. Reticle
14.1 Type
14.2 Dot
14.3 Location
14.4 Brightness
14.5 Mode
15. PIP (Picture in Picture)
16. Download “Smart Thermal” APP
17. Technical Inspection
18. Maintenance
19. Update and ThermTec Outdoor
20. Troubleshooting
Information to the User
14
14
15
15
15
23
23
23
23
24
24
24
25
25
25
25
25
28
IMPORTANT SAFETY INFORMATION
Environmental influences
Safety instructions for use
WARNING! Prohibition that the lens of the device immediate-
ly look towards at intense heat such as the sun or laser device.
The objective lens and eyepiece can have an influence on a
burning glass and damage the internal components, the
guarantee can not include damage caused via an incorrect
operation.
Environmental influences
Regulatory information
Check the power supply unit, cable and adapter for visible
damage before use.
Do not use any defective parts. Defective components
must be replaced.
Do not use the power supply unit in wet or humid environ-
ments.
Only use the original cable provided with the battery
charger.
Do not make any technical modifications.
For further information and safety instructions, please refer
to the User Manual provided. It is also available on our
website in the download center: www.thermeyetec.com.
This product and, if applicable, the supplied
accessories are marked with “CE” and comply
therefore with the applicable harmonized
European standards listed under the Radio
Equipment Directive 2014/53/EU, the EMC
Directive 2014/30/EU, the RoHS Directive
2011/65/EU.
Handle the device and battery pack with care: rough
handling may damage the battery pack.
Do not expose the device to fire or high temperatures.
Only use the battery charger included in the delivery
package.
The battery capacity decreases when operated in a cold
ambient temperature. This is not a fault and occurs for
technical reasons.
Always store the device in its carrying bag in a dry, well-ven-
tilated space. For prolonged storage, remove the batteries.
Do not expose your device to extreme temperatures lower
than - 20°C and higher than + 50°C.
The product shall only be connected to a USB Type C
interface.
If the device has been damaged or the battery is defective,
send the device to our after-sales service for repair.
4
For business customers
within the European Union
Please contact your dealer or supplier regarding the disposal
of electrical and electronic devices who will provide you with
further information.
Information on disposal in other countries
outside of the European Union
This symbol is only applicable in the European Union. Please
contact your local authority or dealer if you wish to dispose of
this product and ask for a disposal option.
Intended user
The device is intended for displaying heat signatures during
nature
observation, remote hunting observations and for civil use.
This device is not a toy for children.
Use the device only as described in this User Manual. The
manufacturer and the dealer accept no liability for damages
which arise due to non-intended or incorrect use.
Installing/removing the battery
CAUTION
The vidar series thermal imaging scope is equipped with two
power supply systems ‒ one built-in battery pack and the
other replaceable 18650 battery. The built-in battery pack
cannot be removed.
Avoid hard objects.
CAUTION
Do not aim the lens directly at the sun or high-tempera-
ture light sources.
Do not use the device in extremely cold or hot environ-
ment.
Charge the battery once every three months when it is
not used for a long period of time.
Do not irradiate the laser indicator of the device to
human eyes.
Do not disassemble or modify the device by yourself in
any way.
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European
Union. For proper recycling, return this product
to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at
designated collection points. For more informa-
tion visit www.recyclethis.info.
5
Introduction
Compact Vidar Series thermal imaging scope is equipped with
12µm high-sensitivity detector with the resolution up to
640x512, and adopts 25mm lens and dual-field of view with
the focal lengths of 20mm/60mm, 1024x768 high-definition
OLED display, as well as Laser rangefinder activation, up to
1,200m for measurement distance. It gets clear view under
harsh environments, even in poor visibility or total darkness. It
helps to see through obstacles hindering the detection of
targets. The function of easy connection to phone enables
users to share views in real time.
Vidar Series thermal imaging scope is designed for various
areas of application including night hunting, observation,
rescue operations, hiking and traveling, etc.
Features
Dual FOV
Ballistic calculater
Auto zeroing
Laser rangefinder up to 1,200m
Memory chip up to 64GB
Compact design
Shutterless technique
Automatic object detection
Easy battery installation
Picture in picture function
1x--5x continuous zoom
Support RAV function
Various pesudo colors
Polarity reversal for crosshairs
1 2
6
Specification - Vidar 3/6
3
7
Specification - Vidar 3L/6L
8
This manual suits for next models
8
Table of contents
