ThermoWorks Therma K User manual

Therma K

Therma K-Plus

Operating Instructions

Ref: 547-202 / 22.01.20P-10-007-02-h

MODEL

Therma K

Therma K-Plus

ORDER CODE

221-041

221-051

SPECIFICATIONS

–148 to 2501°F (–100 to 1372°C)

0.1/1° auto ranging @ 599.9°F (299.9°C)

±0.5°F (±0.3°C) from 32 to 212°F

(0 to 100°C) ±0.7°F (±0.4°C), ±0.1% full range

3 x AAA, minimum 5 years (10,000 hours)

After 10 min. to save battery life

Type K thermocouple, mini socket

–4 to –122°F (–20 to –50°C)

0.5-inches (12 mm) LCD

5 H x 2.2 W x 1 D inches (128 H x 56 W x 25 D mm)

4.6 oz. (130 g)

NIST-traceable certiﬁcate included

Range

Resolution

Accuracy

Battery

Auto-Off

Probe

Environmental

Range

Display

Dimensions

Weight

Calibration

741 E. Utah Valley Dr., American Fork, UT 84003

Ph: 801-756-7705 Fax: 801-756-8948

thermoworks.com

Standard

Protective Boot

(THS-830-227)

SST Wall Bracket

w/Probe Holder

(THS-832-050

Mini-Handle Super-Fast¨ Penetration

Type K Thermocouple Probe

(THS-313-158)

Rubber Boot w/

Probe Holder

(THS-830-255)

ACCESSORIES/RELATED ITEMS

GUARANTEE - This instrument carries a two-year

warranty against defects in either components

or workmanship. During this period, products

that prove to be defective will, at the discretion of

ThermoWorks, be either repaired or replaced without

charge. This warranty does not apply to probes,

where a six-month period is offered. Full details of

liability are available within ThermoWorks’ Terms

& Conditions of Sale at www.thermoworks.com/

product-warranty.

For warranty, service, and technical assistance,

please contact ThermoWorks’ Technical Support

at (801) 756-7705 or email at techsupport@

thermoworks.com.

INSTRUMENT OPERATION - Where applicable,

connect a probe via the socket located at the top of

the instrument. Switch the instrument on and apply

the tip of the probe to the substance or medium to be

measured. The instrument reading may take a few

seconds to stabilize, depending on the nature of the

measurement and sensitivity of the probe.

HOLD (Therma K-Plus) - Press the HOLD/°C/°F

button to freeze the display.

AUTO OFF - The instrument will switch off

automatically after 10 minutes. To disable auto off

(Therma K-Plus) press down the BACKLIGHT button

while switching on the instrument (this is reset when

the instrument is switched off).

CHANGE FROM FAHRENHEIT TO CELSIUS - Press

and hold the “ON/OFF” (Therma K-Plus: HOLD)

button for 5 seconds at startup and the displayed

temperature will change from °F and °C.

OPEN CIRCUIT/FAULTY PROBE - If the probe has

developed an 'Open Circuit' fault the instrument will

display 'Err'.

BACKLIGHT (Therma K-Plus) - Press the backlight

button and the display will illuminate. Press again

and the backlight will turn off. The backlight will

turn off automatically after 20 seconds to preserve

battery life.

SENSORS - This instrument should only be used

with type K (Nickel Chromium/Nickel Aluminium)

thermocouple probes (to BS EN 60584-2) ﬁtted

with miniature type K thermocouple plugs, where

applicable (to BS EN 50212).

BATTERY REPLACEMENT - The instrument will

display 'LO BAT' to warn that the batteries will need

changing soon. The instrument continues to measure

accurately but after further usage the instrument will

display 'ﬂat bat' and shutdown. Replace the batteries

with three AAA batteries located under the rear cover

that is held in place by a single screw.

CALIBRATION TRIM (Therma K-Plus)

Visit www.thermoworks.com/therma-k-plus for

instructions.

INSTRUMENT CLEANING - Clean the instrument

regularly with an anti-bacterial probe wipe to avoid

potential food-borne bacteria growth.

WARNING - IPA and other solvents may cause

damage to the case of this instrument.

This manual suits for next models

Table of contents

Other ThermoWorks Thermometer manuals

ThermoWorks

ThermoWorks TW8060 User manual

ThermoWorks

ThermoWorks RayTemp 2 Plus User manual

ThermoWorks

ThermoWorks Therma 20 Plus User manual

ThermoWorks

ThermoWorks Pro-Surface Thermapen User manual

ThermoWorks

ThermoWorks MicroTherma 2K User manual

ThermoWorks

ThermoWorks IR-PRO User manual

ThermoWorks

ThermoWorks Smoke X4 User manual

ThermoWorks

ThermoWorks Reference Thermapen User manual

ThermoWorks

ThermoWorks Thermapen Blue User manual

ThermoWorks

ThermoWorks Signals User manual

ThermoWorks

ThermoWorks WAND THD2FE User manual

ThermoWorks

ThermoWorks ProNeedle User manual

ThermoWorks

ThermoWorks Smoke User manual

ThermoWorks

ThermoWorks BlueDOT User manual

ThermoWorks

ThermoWorks Therma 20 User manual

ThermoWorks

ThermoWorks Signals User manual

ThermoWorks

ThermoWorks Thermapen Blue User manual

ThermoWorks

ThermoWorks Therma Waterproof User manual

ThermoWorks

ThermoWorks TW362B ThermoWorks User manual

ThermoWorks

ThermoWorks Saf-T-Log User manual

ThermoWorks

ThermoWorks Precision User manual

ThermoWorks

ThermoWorks Thermapen Mk4 User manual

ThermoWorks

ThermoWorks Precision User manual

ThermoWorks

ThermoWorks ThermoPop User manual

Popular Thermometer manuals by other brands

Delton

Delton 981A instruction manual

Baker

Baker MM2P instruction manual

Tarmo

Tarmo 320281 manual

Citizen

Citizen CTD 504 instruction manual

TFA

TFA 14.1500 instruction manual

Vive

Vive DMD1010 user manual

Gotemp

Gotemp THB4002 user guide

GREISINGER

GREISINGER G 1202 Quick reference guide

Amprobe

Amprobe TMD-53W user manual

Trotec

Trotec BP10 operating manual

Radiance instruments

Radiance instruments RT616 Series product manual

Eurolec

Eurolec IR151 operating instructions

Scaneo

Scaneo TS42B instruction manual

Sper scientific

Sper scientific 800043 instruction manual

Microlife

Microlife NC 200 Operating instructions manual

Motorola

Motorola MBP69SN General questions

The MeatStick

The MeatStick The MeatStick quick start guide

Hama

Hama TH35-A operating instructions