Texas Instruments TPS71533EVM User manual



   

May 2003 Power Management Products Low Power

User’s Guide

SLVU061A

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,

enhancements, improvements, and other changes to its products and services at any time and to discontinue

any product or service without notice. Customers should obtain the latest relevant information before placing

ordersandshouldverifythatsuchinformationiscurrentandcomplete.AllproductsaresoldsubjecttoTI’sterms

and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in

accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI

deems necessary to support this warranty. Except where mandated by government requirements, testing of all

parameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible for

their products and applications using TI components. To minimize the risks associated with customer products

and applications, customers should provide adequate design and operating safeguards.

TIdoesnotwarrantorrepresentthatanylicense, eitherexpress orimplied, isgranted underanyTIpatentright,

inwhichTIproductsorservicesareused.InformationpublishedbyTIregardingthird–partyproductsorservices

does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.

Use of such information may require a license from a third party under the patents or other intellectual property

of the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of information in TI data books or data sheets is permissible only if reproduction is without

alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction

of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for

such altered documentation.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that

product or service voids all express and any implied warranties for the associated TI product or service and

is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

EVM IMPORTANT NOTICE

Texas Instruments (TI) provides the enclosed product(s) under the following conditions:

Thisevaluationkit being soldbyTI is intendedforuse for ENGINEERING DEVELOPMENT OR EVALUATION

PURPOSES ONLY and is not considered by TI to be fit for commercial use. As such, the goods being provided

may not be complete in terms of required design-, marketing-, and/or manufacturing-related protective

considerations, including product safety measures typically found in the end product incorporating the goods.

As a prototype, this product does not fall within the scope of the European Union directive on electromagnetic

compatibility and therefore may not meet the technical requirements of the directive.

ShouldthisevaluationkitnotmeetthespecificationsindicatedintheEVMUser’sGuide,thekitmaybe returned

within 30 days from the date of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE

WARRANTY MADE BY SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED,

IMPLIED,ORSTATUTORY,INCLUDINGANYWARRANTY OF MERCHANTABILITY ORFITNESSFORANY

PARTICULAR PURPOSE.

The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user

indemnifies TI from all claims arising from the handling or use of the goods. Please be aware that the products

receivedmaynotberegulatorycompliant oragency certified (FCC,UL, CE,etc.). Dueto theopen construction

oftheproduct,itistheuser’sresponsibilitytotakeanyandallappropriateprecautionswithregardtoelectrostatic

discharge.

EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE

TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

TI currently deals with a variety of customers for products, and therefore our arrangement with the user is not

exclusive.

TI assumes no liability for applications assistance, customer product design, software performance, or

infringement of patents or services described herein.

Please read the EVM User’s Guide and, specifically, the EVM Warnings and Restrictions notice in the EVM

User’sGuidepriortohandlingtheproduct.Thisnoticecontainsimportantsafetyinformationabouttemperatures

and voltages. For further safety concerns, please contact the TI application engineer.

Persons handling the product must have electronics training and observe good laboratory practice standards.

No license is granted under any patent right or other intellectual property right of TI covering or relating to any

machine, process, or combination in which such TI products or services might be or are used.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

DYNAMIC WARNINGS AND RESTRICTIONS

It is important to operate this EVM within the input voltage range of 2.7–24 V and the output

current range of 0 mA to 50 mA.

Exceeding the specified input range may cause unexpected operation and/or irreversible

damage to the EVM. If there are questions concerning the input range, please contact a TI

field representative prior to connecting the input power.

Applyingloadsoutsideofthespecifiedoutputrangemayresultinunintendedoperationand/or

possible permanent damage to the EVM. Please consult the EVM User’s Guide prior to

connecting any load to the EVM output. If there is uncertainty as to the load specification,

please contact a TI field representative.

Duringnormaloperation,somecircuitcomponentsmayhavecasetemperaturesgreaterthan

85°C.TheEVM isdesignedto operateproperlywith certaincomponentsabove 85°C aslong

astheinputandoutput rangesare maintained.Thesecomponentsincludebut arenot limited

tolinearregulators,switchingtransistors,passtransistors,andcurrentsenseresistors.These

typesof devicescanbeidentifiedusingtheEVM schematiclocated intheEVMUser’sGuide.

When placing measurement probes near these devices during operation, please be aware

that these devices may be very warm to the touch.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

Read This First

Preface

About This Manual

This user’s guide describes the TPS71533EVM LDO regulator evaluation

module. Each EVM PCB contains a SLVP199 test board with a

TPS71533DCK low dropout linear regulator as well as supporting passive

components. The EVM provides a convenient method of evaluating the

performanceoftheTPS715xxlinearregulator family or otherSC-70/SOT-323

packaged devices with similar pin-outs.

How to Use This Manual

-Chapter 1—Introduction

-Chapter 2—EVM Test Setup

-Chapter 3—Test Results

Related Documentation From Texas Instruments

-TPS71533 data sheet (literature number SLVS338)

Running Title—Attribute Reference

vii

Contents

1 Introduction 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1 TPS715xx Family of LDO Regulators 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 EVM Design Strategy 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3 Schematic 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.4 Bill of Materials 1-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.5 Board Layout 1-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 EVM Test Setup 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3 Test Results 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Figures

1–1 Schematic Diagram 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1–2 Top Layer 1-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1–3 Bottom Layer 1-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1–4 Assembly Drawing (top) 1-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2–1 Recommended TPS71533EVM Test Setup 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3–1 Input Voltage Ramp vs Output Voltage 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Tables

1–1 TPS71533EVM Bill of Materials 1-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

viii

1-1

Introduction

This user’s guide describes the TPS71533EVM LDO regulator evaluation

module. Each EVM contains a TPS71533 low dropout linear regulator as well

as supporting passive components.

Topic Page

1.1 TPS715xx Family of LDO Regulators 1–2. . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 EVM Design Strategy 1–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3 Schematic 1–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.4 Bill of Materials 1–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.5 Board Layout 1–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 1

TPS715xx Family of LDO Regulators

1-2 Introduction

1.1 TPS715xx Family of LDO Regulators

TheTPS715xxfamilyofLDOregulatorsiscomprisedofsmallSOT–223/PICO

packaged regulators capable of delivering 50 mA of output current. Features

of the part include:

-50-mA Low-Dropout Regulator

-24-V Maximum Input Voltage

-Low 4.25-µA Quiescent Current at 50 mA

-5-Pin PICO/SC70 (DCK) Package

-Stable With Any Ceramic Capacitor (>0.47 µF)

-Dropout Voltage Typically 100 mV at 50 mA

-Over Current Limitation

-–40°C to 125°C Operating Junction Temperature Range

1.2 EVM Design Strategy

The purpose of this EVM is to facilitate evaluation of the TPS715xx family of

LDO regulators. Each EVM PCB contains a TPS71533 low dropout linear

regulator as well as supporting passive components. Also, the board’s small

size and side clips facilitate attaching it to other PCBs as a power module.

1.3 Schematic

Figure1-1 shows the SLVP199PCB schematic diagram, whichis used as the

PCB for the TPS71533EVM.

Figure 1–1.Schematic Diagram

NCNC

GND

OUT

TPS71533DCK

Not Used C2 1 µF

J3 VO

J1 VI

0.1 µF

GND

Table of contents

Other Texas Instruments Control Unit manuals

Texas Instruments

Texas Instruments LM5066I EVM User manual

Texas Instruments

Texas Instruments bq35100 Product manual

Texas Instruments

Texas Instruments AM572x series User manual

Texas Instruments

Texas Instruments TPS23525EVM-815 User manual

Texas Instruments

Texas Instruments INA290EVM User manual

Texas Instruments

Texas Instruments TSW14J56 User manual

Texas Instruments

Texas Instruments HSS-MOTHERBOARDEVM User manual

Texas Instruments

Texas Instruments UCC28740EVM-525 User manual

Texas Instruments

Texas Instruments TMDS64DC01EVM User manual

Texas Instruments

Texas Instruments OPT8241-CDK-EVM User manual

Texas Instruments

Texas Instruments ADS1x15V2EVM-PDK User manual

Texas Instruments

Texas Instruments TLC6A598 User manual

Texas Instruments

Texas Instruments TUSB564RNQ User manual

Texas Instruments

Texas Instruments AM437x User manual

Texas Instruments

Texas Instruments WiLink WL 1MOD Series User manual

Texas Instruments

Texas Instruments bq27 10EVM Series User manual

Texas Instruments

Texas Instruments DRV2605LEVM-MD User manual

Texas Instruments

Texas Instruments LM63635EVM User manual

Texas Instruments

Texas Instruments LP8863EVM User manual

Texas Instruments

Texas Instruments LM76005QEVM User manual

Texas Instruments

Texas Instruments TA 5 1 Q15B5EVM-K Series User manual

Texas Instruments

Texas Instruments DRV8803 User manual

Texas Instruments

Texas Instruments BoosterPack IWR1642 User manual

Texas Instruments

Texas Instruments TPS61177AEVM User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual