Tevion Film Strip Scanner User manual
Helpline no.: UK/N. Ireland: 08 458 684 540 Rep. of Ireland: 076 60 600 29
Web Support: www.unisupport.net P50615 1
Film Strip Scanner
User Manual
After Sales Support
Now you have purchased a TEVION Film
Strip Scanner you can rest assured in the
knowledge that as well as your 3 year
parts and labour warranty you have the
added peace of mind of dedicated help
lines and web support:
Helpline no.: UK/N. Ireland: 08 458 684 540 Rep. of Ireland: 076 60 600 29
Web Support: www.unisupport.net P50615 2
Helpline number:
UK/Northern Ireland: 08 458 684 540
Republic of Ireland: 076 60 600 29
www support:
www.unisupport.net
Helpline no.: UK/N. Ireland: 08 458 684 540 Rep. of Ireland: 076 60 600 29
Web Support: www.unisupport.net P50615 3
TABLE OF CONTENTS
IMPORTANT NOTICE.........................................................................4
PRECATIONS.....................................................................................5
DISPOSAL (WEEE).............................................................................6
BEFORE YOU START ........................................................................7
Driver and software installation.......................................................7
Driver installation............................................................................7
Windows XP...................................................................................7
Windows Vista................................................................................7
SOFTWARE INSTALLATION..............................................................8
CALIBRATING THE FILM STRIP SCANNER ......................................9
STANDARD SETTING ......................................................................10
HOW TO LOAD NEGATIVES / SLIDES INTO THE TRAY .................11
INDIVIDUAL SELECTION OF PICTURE SEQUENCE.......................13
USING THE FILM STRIP SCANNER.................................................14
To scan pictures...........................................................................15
To transfer/save pictures..............................................................15
EDITING THE PICTURES.................................................................16
Enhance.......................................................................................16
Colour..........................................................................................17
Red-Eye.......................................................................................17
Crop.............................................................................................18
Straighten.....................................................................................18
BLUR BACKGROUND ......................................................................19
Healing brush...............................................................................19
Clone...........................................................................................20
Lighten/Darken.............................................................................20
Smudge .......................................................................................20
Sharpen.......................................................................................20
Blur..............................................................................................21
Paint Brush ..................................................................................21
Line..............................................................................................21
Eraser..........................................................................................21
Clipboard .....................................................................................21
SAVING YOUR EDITED PHOTOS....................................................22
TECHNICAL SPECIFICATIONS........................................................23
System requirements....................................................................23
FAQ..................................................................................................24
Problem .......................................................................................24
Reason ........................................................................................24
Solution........................................................................................24
Warranty Card...................................................................................27
Fault Report Card..............................................................................29
Helpline no.: UK/N. Ireland: 08 458 684 540 Rep. of Ireland: 076 60 600 29
Web Support: www.unisupport.net P50615 4
IMPORTANT NOTICE
Always use only the standard settings of the program when
installing the software and calibrating/using the film strip scanner.
Otherwise you may risk improper reproduction and reduced quality
of your negatives/slides on your computer.
Helpline no.: UK/N. Ireland: 08 458 684 540 Rep. of Ireland: 076 60 600 29
Web Support: www.unisupport.net P50615 5
PRECATIONS
High-voltage internal
components create the risk
of electric shock when
exposed. Only authorized
service providers should
perform maintenance and
repairs.
Never operate the scanner
inside an aircraft or
anywhere else where
operation of such devices is
restricted. Improper use
creates the risk of serious
accident.
If you notice smoke or a
strange odor coming from
the scanner, turn the power
off immediately. Take the
scanner to the nearest
authorized service centre
for repair. Never attempt to
repair the scanner on your
own.
Use only the recommended
power sources. Use of
power sources not
expressly recommended for
the scanner may lead to
overheating, distortion of
the equipment, fire,
electrical shock or other
hazards.
Do not try to open the case
of the scanner or attempt to
modify the scanner in any
way.
The scanner may become
slightly warm during use.
This does not indicate
malfunction.
Keep the scanner and its
accessories out of the
reach of children and
animals to prevent
accidents or damage to the
scanner.
Keep the scanner away
from water and other
liquids. Do not use the
scanner with wet hands.
Never use the scanner in
the rain or snow. Moisture
creates the danger of fire
and electric shock.
If the exterior of the
scanner needs cleaning,
wipe it with a soft, dry cloth.
Helpline no.: UK/N. Ireland: 08 458 684 540 Rep. of Ireland: 076 60 600 29
Web Support: www.unisupport.net P50615 6
DISPOSAL (WEEE)
Electrical and electronic equipment (EEE) contains materials, parts
and substances, which can be dangerous to the environment and
harmful to human health if waste of electrical and electronic
equipment (WEEE) is not disposed of correctly.
Equipment, which is marked with the WEEE logo (as shown
above), should not be thrown away with your household waste.
Contact your local authority waste disposal department, as they will
be able to provide details of the recycling options available in your
area.
Helpline no.: UK/N. Ireland: 08 458 684 540 Rep. of Ireland: 076 60 600 29
Web Support: www.unisupport.net P50615 7
BEFORE YOU START
Driver and software installation
To use the scanner you must install the scanner driver and the
ArcSoft Photo Impression 6 software.
Note:
If another version of Photo Impression 6 is already installed on
your computer you have to un-install it before installing this new
software.
The scanner should NOT be connected to your computer at this
stage.
Driver installation
1. Turn on the computer.
2. Insert the installation CD
into the CD-ROM drive.
3. Select “Scanner Driver-
32 bit” by clicking it once.
4. Follow the on-screen
instructions to install the
driver:
Windows XP
• Click “Next”
• Click “Install”
• Click “Finish”
Windows Vista
• Click “Next”
• Click “Install”
• Click “Finish”
• Select “Locate and install driver software (recommended)”
Helpline no.: UK/N. Ireland: 08 458 684 540 Rep. of Ireland: 076 60 600 29
Web Support: www.unisupport.net P50615 8
SOFTWARE INSTALLATION
1. Select “ArcSoft Software Suite”.
2. Follow the on-screen instructions.
3. The installed software will automatically create a
PhotoImpression 6 shortcut on your desktop.
4. Insert the film strip scanner cable in the USB 2.0 *) port on
your PC and let remain there.
When the film strip scanner is powered the LED on top of it will
light blue.
5. Restart the computer.
*) If the scanner cannot be seen in the list of your installed
hardware you should connect it to a USB port on the back of your
PC (improved power supply).
Helpline no.: UK/N. Ireland: 08 458 684 540 Rep. of Ireland: 076 60 600 29
Web Support: www.unisupport.net P50615 9
CALIBRATING THE FILM STRIP SCANNER
Before using the film strip scanner the first time it should be
calibrated.
Note:
NO trays should be inserted in the scanner slide at this stage.
1. Click the Photo Impression 6 shortcut on the desktop.
2. Click “Get Photos”.
3. Select “Acquire from Scanner”.
4. Click "Calibrate" in the lower left corner of the display.
Helpline no.: UK/N. Ireland: 08 458 684 540 Rep. of Ireland: 076 60 600 29
Web Support: www.unisupport.net P50615 10
STANDARD SETTING
1. Verify that the selected device is OVT Scanner.
2. Select format and quality.
3. Confirm or change the location of where to save your pictures.
4. Select film type.
5. Select colour dept.
6. Select dpi.
7. Click "Acquire".
You are now ready to use the film strip scanner. See next page for
how to load the negatives / slides trays.
Table of contents
Other Tevion Scanner manuals
