Tepex PLFS-N 100 LED User manual

Doc. No.: TEPEx.RS.099

Ver: 1

Date: 02. 2020.

PLFS-N 100 LED

Upute za uporabu

User manual

U P O Z O R E N J E

Upute za uporabu sadrže osnovne informacije o proizvodu.

Montaža, instaliranje, uporaba i održavanje trebaju biti

izvedeni prema ovoj Uputi kako bi bio osiguran siguran rad

unutar nazivnih karakteristika. Ovu Uputu nadopunjuju

nacionalni Pravilnici i norme. Odgovorna osoba korisnika je

dužna osigurati njihovo provođenje. Neprovođenje može

umanjiti protueksplozijsku zaštitu uređaja i dovesti u

opasnost ljude, imovinu i okoliš. Svako neispravno i

nedozvoljeno postupanje kao i nepoštivanje odredbi ove

Upute isključuje svaku odgovornost proizvođača.

Prije ugradnje/puštanja u pogon:

-Pažljivo pročitati cijelu Uputu za uporabu,

-Izvršiti odgovarajuću obuku odgovornog osoblja,

-Provjeriti da je sadržaj ove Upute u potpunosti

razumljiv odgovornim osobama,

-Uvjeriti se da su primijenjeni svi zahtjevi nacionalnih Pravilnika

i posebne sigurnosne mjere ukoliko postoje.

U slučaju nejasnoća:

-Kontaktirati proizvođača.

Tijekom pogona:

-Osigurati da ove Upute za uporabu i druge radne upute

korisnika budu vidljivo istaknute i dostupne odgovornom

osoblju cijelo vrijeme,

-Provjeravati provođenje ove Upute i svih drugih

sigurnosnih uputa korisnika.

W A R N I N G

The user manual contains basic information about the

product. Mounting, installation, usage and maintenance

should be carried out under this user manual to provide and

ensure safe operation within the nominal characteristics. This

user manual complement national Regulation and Standards.

The responsible person shall ensure their implementation.

Failure off implement this user manual can reduce explosion

protection and endanger people, property and the

environment. Any improper and illegal actions as well as non-

compliance with the provisions of this user manual excludes

all responsibility by manufacturer side.

Before installation/commissioning:

-Carefully read all instructions,

-Execute proper training of responsible personnel,

-Check that the contents of these instructions is fully

understandable by the responsible personnel,

-Make sure that all the requirements and national Regulations as

well as all special security measures are applied.

In lack of understanding:

-Contact the manufacturer.

During operation:

-Ensure that this user manual and other work instructions are

available to the responsible staff at all times,

-Check the implementation of these instructions and all other

safety user’s instructions.

Medarska 69, Zagreb, Croatia

XMade in Croatia

tel. 00385 49 222 900

fax. 00385 49 426 450

e-mail: [email protected]

web: www.tepex.hr

0722

SADRŽAJ:

1. Namjena………………….……………….……………….……………….

2. Sukladnost proizvoda….………………………………………………

3. Tehnički podaci…………...……………………………………………..

4. Tipna oznaka………………….……………………………………………

5. Montaža………………………...…………………………………………..

6. Dimenzije……..................................................................

7. Pregled, održavanje, popravak, obnavljanje…………………

8. Rezervni dijelovi ……………….…….………………………………….

9. Odgovornost i ovlaštenja…………………..………………………..

10. Skladištenje i transport….……………………………………………

11. Jamstvo proizvođača………….……………………………………….

12. Označavanje……………………………………………………………….

CONTENTS:

1. Purpose…………………………………...…………....………………….

2. Product conformity………..………..………………………………..

3. Technical data……………………………………………………………

4. Types …………………………….…………………………………………..

5. Mounting………………………….………………………………..........

6. Dimensions…………………………………………………………….....

7. Inspection, maintenance, repair and overhaul……………

8. Spare parts.………………………………………………………………..

9. Responsibility and authorization.……………………………….

10. Storage and transport…………………………………………………

11. Manufacturer's warranty.…………………………………………..

12. Marking……..………………………………………………………........

1. NAMJENA

Protueksplozijski zaštićena ovjesna svjetiljka PLFS-N 100 LED

namijenjena je za upotrebu u industrijskim prostorima na

mjestima s potencijalno eksplozivnom atmosferom plinova,

para i prašina u zonama opasnosti 1, 2, 21, 22 sukladno normi

EN 60079-10-1 i EN 60079-10-2.

2. SUKLADNOST PROIZVODA

Konstrukcija svjetiljke sukladna je s normama EN 60598-1 i svim

povezanim normama.

Proizvod je sukladan Pravilniku o opremi i zaštitnim sustavima

namijenjenim za uporabu u potencijalno eksplozivnim

atmosferama, NN br. 34/16.

Proizvod je sukladan ATEX Direktivi 2014/34/EU i normama:

-EN IEC 60079-0:2018,

-EN 60079-1:2014,

-EN IEC 60079-7:2015+A1:2018,

-EN 60079-28:2015,

-EN 60079-31:2014.

Proizvod je razvijen, proizveden i ispitan prema postojećem

stanju tehnike sukladno normama EN ISO 9001,

EN ISO 80079-34 i EN ISO 14001.

Proizvod je sukladan LVD Direktivi 2014/35/EU.

Proizvod je sukladan RoHS Direktivi 2011/65/EU.

Proizvod je sukladan EMC Direktivi 2014/30/EU.

3. TEHNIČKI PODACI

Certifikat

FIDI 19 ATEX 0031

Oznaka kategorije i

protueksplozijske zaštite

uređaja:

II 2G Ex db eb op is IIC T6 Gb

II 2D Ex tb op is IIIC T85°C Db

Temperatura okoline:

-40°C /-20°C ≤ Ta ≤+50°C

Mehanička zaštita:

IP 66

Otpornost na udar:

IK 08

Klasa zaštite:

I (PE - zaštitno uzemljenje)

Nazivni napon Un:

110 –230 V AC, 127-230V DC

Radni napon:

90 - 305 V AC / 127 - 431 V DC

Nazivna snaga Pn:

35 W/ 60 W / 80 W / 100 W

Faktor snage:

>0,95

LED izvor:

CLU058-1825C4-403M2M2-F1,

Citizen LTD.

OVP zaštita:

IEC 61000-4-5, EN 62031 3kV/1min

-udarni prenapon 8/20μs 6kV/3kA

1. PURPOSE

Explosion protected pendant light fitting type PLFS-N 100 LED, is

intended for general lighting in industrial areas with potentially

explosive atmosphere Zones 1, 2, 21, 22 in accordance with

EN 60079-10-1 and EN 60079-10-2. The quality of the materials

ensures compliance with standard functionality in standard industrial

atmosphere.

2. PRODUCT CONFORMITY

The product complies with the standards:

-EN IEC 60079-0:2018,

-EN 60079-1:2014,

-EN IEC 60079-7:2015+A1:2018,

-EN 60079-28:2015,

-EN 60079-31:2014.

The product has been developed, manufactured and tested according

to the existing state of technique accordance with the

standards EN ISO 9001 and EN ISO 80079-34 and EN ISO 14001.

The product is in compliance with the ATEX Directive 2014/34/EU.

The product is in compliance with the LVD Directive 2014/35 EU.

The product is in compliance with the RoHS Directive 2011/65 EU.

The product is in compliance with EMC Directive 2014/30/EU.

3. TECHNICAL DATA

Certificate:

FIDI 19 ATEX 0031

Category and

explosion protection:

II 2G Ex db eb op is IIC T6 Gb

II 2D Ex tb op is IIIC T85°C Db

Ambient temperature:

-40°C /-20°C ≤ Ta ≤+50°C

Mechanical protection:

IP66

Resistance to shock:

IK 08

Class of protection:

I (PE - protective earthing)

Rated voltage Un:

110 –230 V AC, 127-230V DC

Service voltage:

90 - 305 V AC / 127 - 431 V DC

Rated power Pn:

35 W/ 60 W / 80 W / 100 W

Power factor:

>0,95

LED light source:

CLU058-1825C4-403M2M2-F1,

Citizen LTD.

OVP protection:

IEC 61000-4-5, EN 62031 3kV/1min

impulse overvoltage 8/20μs 6kV/3kA

LED driver:

LED driver PLFS-N 100 LED, HBG-

100P-60 MEANWELL Co.Ltd.

OCP zaštita:

2,25 A F

OTP zaštita:

Tsmax=80°C, povratno, IEC 60730-1

Svjetlosni tok:

5500 lm at Tamb = 25°C for 35W

9400 lm at Tamb = 25°C for 60W

12500 lm at Tamb = 25°C for 80W

15600 lm at Tamb = 25°C for 100W

Temperatura boje

svjetlosti:

4000 K

Indeks uzvrata boje (CRI):

>80

Očekivana životna dob

LED-a:

50 000 radnih sati

pri tamb=40°C – L90/B10

Priključne stezaljke:

stezaljke za spajanje faznog,

neutralnog i zaštitnog vodiča

L1, L2, L3, N, PE;

max 4 mm2 sol (r), sol (s), f,

Moment pritezanja stezaljke 1,2 Nm

Proizvođač:

Connectwell Pvt. doo, Indija,

Certifikat: SIRA 16 ATEX 3170U

Oznaka kategorije i

protueksplozijske zaštite uređaja:

II 2G Ex eb IIC Gb ili Ex ib IIC Gb

Tip adaptera ADP23 / 1 [L,N,PE]

Oznaka kategorije i

protueksplozijske zaštite uređaja:

II 2G Ex db eb IIC T6 Gb ili

II 2D Ex tb IIIC T85 ° C Db

Certifikat tipa: FIDI 19 ATEX 0014X

Proizvođač: TEPEx d.o.o, Hrvatska

Vanjske stezaljke za

uzemljenje:

stezaljke za vanjsko uzemljenje i

izjednačavanje potencijala,

max 2 x 6 mm2 sol(s), f

Uvodi:

prema tablici izvedbi

Ex e uvodnica i čep:

jedna Ex eb II 2G / II 2D kabelske

uvodnice M25x1,5

i jedan Ex eb II 2G / II 2D čep

M25x1,5 sukladno EN 50262

Momenti pritezanja:

Pritisna matica Ex eb uvodnice

2,5 Nm

Tijelo Ex db uvodnice i čepa

3,5 Nm

Masa:

cca 10,5 kg

Navojni raspori (According to EN 60079-1/2014, clause 5.3):

M 195x 2 - 6H/6g, medium tolerance according to ISO 965-1/98,

thread DIN 13 T.24/83, 8 full threads

M 20 x 1,5 - 6H/6g, medium tolerance according ISO 965-1/98,

thread ISO 965-3/98, 9 full threads

Kombinirani raspor (According to EN 60079-1/2014, clause 5.2):

L=c+d=(6,4±0,1)+(22±0,1)=28,4±0,2 mm

Gap imax= 0,2 mm (f<0,5 mm)

LED driver:

LED driver PLFS-N 100 LED,

HBG-100P-60 MEANWELL Co.Ltd.

OCP protection:

2,25 A F

OTP protection:

Tsmax=80°C, resettable, IEC 60730-1

Rated luminous flux:

5500 lm at Tamb = 25°C for 35W

9400 lm at Tamb = 25°C for 60W

12500 lm at Tamb = 25°C for 80W

15600 lm at Tamb = 25°C for 100W

Light colour:

4000 K

Refractive index(CRI):

>80

Estimated service life:

50 000 working hours

Tamb = 40°C L90/B10

Connection terminal:

terminals for phase, neutral and

earthing conductors

L1, L2, L3, N, PE;

max 4 mm2 sol(r), sol(s), f,

torque screw for terminals 1,2 Nm

Manufacturer:

Connectwell Pvt. Ltd., India,

Certificate: SIRA 16 ATEX 3170U

Category and explosion protection:

II 2G Ex eb IIC Gb or Ex ib IIC Gb

Adapter type ADP23/1 [L,N,PE]

Category and explosion protection:

II 2G Ex db eb IIC T6 Gb or

II 2D Ex tb IIIC T85°C Db

Type certificate:FIDI 19 ATEX 0014X

Manufacturer: TEPEx d.o.o, Croatia

Connection terminal for

grounding:

terminal for external grounding,

equipotential bounding,

max 2 x 6 mm2 sol(s), f

Cable entries:

according to type table

Ex e cable gland and

plug:

One Ex eb II 2G / II 2D

cable glands M25x1,5

and one

Ex eb II 2G / II 2D plug M25x1,5

in accordance with EN 50262

Tightening torques

values:

Pinch Nut of the Ex eb cable

glands: 2,5 Nm

Body of the Ex db glands and plug:

3,5 Nm

Weight:

Cca 10,5 kg

Threaded joints (According to EN 60079-1/2014, clause 5.3):

M 195x 2 - 6H/6g, medium tolerance according to ISO 965-1/98,

thread DIN 13 T.24/83, 9 full threads

M 20 x 1,5 - 6H/6g, medium tolerance according ISO 965-1/98,

thread ISO 965-3/98, 10 full threads

Spigot joint (According to EN 60079-1/2014, clause 5.2):

L=c+d=(6,4±0,1)+(22±0,1)=28,4±0,2 mm

Gap imax= 0,2 mm (f<0,5 mm)

4. TIPNA OZNAKA

4. TYPES

PLFS-N 100 LED - . / .

Prvi broj = Nazivna snaga

Drugi broj = Uvodi

PLFS-N 100 LED - . / .

First number = Rated power

Second number = Entries

NAZIVNA SNAGA:

TEMPERATURA OKOLINE:

UVODI:

1. = 35 W

-40°C≤Tamb≤+50°C

1. = Priključna komora [3L+N+PE] i prolazno ožičenje + ISO25 uvodnica i čep za tamb≥-40°C

-20°C≤Tamb≤+50°C

2. = ADP 23/1

3. = Priključna komora [3L+N+PE] i prolazno ožičenje + ISO25 uvodnica i čep za tamb≥-20°C

2. = 60 W

-40°C≤Tamb≤+50°C

1. = Priključna komora [3L+N+PE] i prolazno ožičenje + ISO25 uvodnica i čep za tamb≥-40°C

-20°C≤Tamb≤+50°C

2. = ADP 23/1

3. = Priključna komora [3L+N+PE] i prolazno ožičenje + ISO25 uvodnica i čep za tamb≥-20°C

3. = 80 W

-40°C≤Tamb≤+50°C

1. = Priključna komora [3L+N+PE] i prolazno ožičenje + ISO25 uvodnica i čep za tamb≥-40°C

-20°C≤Tamb≤+50°C

2. = ADP 23/1

3. = Priključna komora [3L+N+PE] i prolazno ožičenje + ISO25 uvodnica i čep za tamb≥-20°C

4. = 100 W

-40°C≤Tamb≤+50°C

1. = Priključna komora [3L+N+PE] i prolazno ožičenje + ISO25 uvodnica i čep za tamb≥-40°C

-20°C≤Tamb≤+50°C

2. = ADP 23/1

3. = Priključna komora [3L+N+PE] i prolazno ožičenje + ISO25 uvodnica i čep za tamb≥-20°C

RATED POWER:

AMBIANT TEMPERATURE:

ENTRIES:

1. = 35 W

-40°C≤Tamb≤+50°C

1. = Connection box [3L+N+PE] and true wiring + ISO25 cable gland and plug for tamb≥-40°C

-20°C≤Tamb≤+50°C

2. = ADP 23/1

3. = Connection box [3L+N+PE] and true wiring + ISO25 cable gland and plug for tamb≥-20°C

2. = 60 W

-40°C≤Tamb≤+50°C

1. = Connection box [3L+N+PE] and true wiring + ISO25 cable gland and plug for tamb≥-40°C

-20°C≤Tamb≤+50°C

2. = ADP 23/1

3. = Connection box [3L+N+PE] and true wiring + ISO25 cable gland and plug for tamb≥-20°C

3. = 80 W

-40°C≤Tamb≤+50°C

1. = Connection box [3L+N+PE] and true wiring + ISO25 cable gland and plug for tamb≥-40°C

-20°C≤Tamb≤+50°C

2. = ADP 23/1

3. = Connection box [3L+N+PE] and true wiring + ISO25 cable gland and plug for tamb≥-20°C

4. = 100 W

-40°C≤Tamb≤+50°C

1. = Connection box [3L+N+PE] and true wiring + ISO25 cable gland and plug for tamb≥-40°C

-20°C≤Tamb≤+50°C

2. = ADP 23/1

3. = Connection box [3L+N+PE] and true wiring + ISO25 cable gland and plug for tamb≥-20°C

5. MONTAŽA

5. INSTALATION

Montaža i instaliranje svjetiljke se izvodi prema podacima na

natpisnim pločicama na svjetiljci, ovim i dodatnim uputama

proizvođača, nacionalnim Propisima i Pravilnicima, kao i prema

općenito priznatim pravilima tehnike. Samo uz taj uvjet osigurana je

tipnim certifikatom potvrđena protueksplozijska zaštita svjetiljke.

Kvaliteta upotrijebljenih materijala jamči funkcionalnost sukladnu

normi, u «normalnoj» industrijskoj atmosferi. Za posebne uvjete

pogona molimo kontaktirati proizvođača.

Montaža svjetiljke na podlogu vrši se preko nosača vijčanim

priborom M6.

Otvaranje kućišta se vrši odvrtanjem osam vijka M6x20. Priključni

kabel se uvodi u kućište kroz predviđene uvodnice. Pri tome treba

provjeriti da su kabeli čisti i neoštećeni. Posebnu pažnju treba

posvetiti odabiru unutarnjeg brtvenog prstena uvodnice prema

vanjskom promjeru kabela. Pritisnu maticu uvodnice i tijelo

uvodnice treba pritegnuti nazivnim momentom. Neiskorišteni uvod,

na isti način, obavezno treba zatvoriti čepom. Zatvaranje kućišta se

izvodi na opisani način, suprotnim redoslijedom radnji.

Installation and putting into operation have to be done according to

technical and certification data on warning label on lamp, this user

manual, national regulations and laws. Only with that, explosion-

proof protection of bulkhead light fitting is ensured with EC-type

examination certificate.

Installation of lamp (on wall or ceiling) is done with steel

brackets with M6 screws.

Opening of Ex e enclosure is done by unscrewing four screws

M6x20. Special attention must be dedicated to selection of inner

gasket sealing ring of Ex db cable glands according to diameter of

connecting cable. Pressure nut and intermediate gland must be

tightened with nominal torque. Unused cable entries must be

closed with plug. The electric connecting is performing by

connecting power supply cable (L, NE, PE) on the connection

terminals and terminal for internal grounding.

The closing of the Ex e enclosure should be done by a reverse

sequence of action.

6. DIMENZIJE

6. DIMENSIONS

7. PREGLED, ODRŽAVANJE, POPRAVAK I OBNAVLJANJE

7. INSPECTION, MAINTENANCE, REPAIR AND OVERHAUL

Potrebno je obavljati preglede i održavati sve dijelove uređaja

o kojima ovisi protueksplozijska zaštita sukladno normi

EN 60079-17, općim i posebnim uputama proizvođača i

Pravilnicima korisnika, a naročito:

da su kućište, svi dijelovi kućišta, zaštitno staklo i

brtve bez puknuća i oštećenja,

da je kućište potpuno zatvoreno sklopom zaštitnog

stakla,

da su uvodnica, čep, vijci kutnika brtve, vijak stezaljke

za uzemljenje pritegnuti nazivnim momentom.

Popravak, obnavljanje ili pregradnju kućišta obavlja

proizvođač ili od proizvođača ovlaštena pravna osoba,

originalnim dijelovima prema proizvodnoj dokumentaciji, a sve

sukladno normi EN 60079-19.

Ukoliko popravak i/ili obnavljanje i/ili pregradnju vrši treća

osoba, prestaje svaka odgovornost proizvođača za proizvod, a

izjava sukladnosti proizvođača postaje nevažeća.

Inspections are carried out in accordance with IEC 60079-17,

general and special conditions of manufacturer and users

Regulations and includes supervision of parts on which the

explosion protection depends, especially:

that the housing, all part of housing, protective glass

and gasket are without rupture and damage,

that the housing is completely closed with set of

protective glass,

that the cable gland, plug, connecting terminals,

screws of protective grid are tightened with nominal

torque.

All the repairs must be performed by the manufacturer or the

manufacturer's authorized personal using the original parts

according to the product documentation, all in accordance

with EN 60079-19.

If repair or any other procedure are performed on the product

by unauthorized person, all producer responsibility for the

product and the warranty and the manufacturer's Declaration

of conformity becomes invalid.

276±2

Ø20

WARNING

DO NOT OPEN WHEN

ENERGIZED

AFTER DE-ENERGIZING DELAY

FIVE MINUTES BEFORE OPENING

208±2

PLFS-N 100 LED -./. 230V .. W

Medarska 69, Zagreb, Croatia

xxx

II 2G Ex db eb op is IIC T6 Gb

Made in Croatia

II 2D Ex tb op is IIIC T80° Db

....

... 19 ATEX .... P - DAT-

IP 66 -40°C<Ta<+40°C/+50°C

240±2

Ø13Ø22

276±2

Ø20

208±2

240±2

Ø13Ø22

WARNING

DO NOT OPENWHEN

ENERGIZED

AFTER DE-ENERGIZINGDELAY

FIVE MINUTES BEFOREOPENING

Medarska 69, Zagreb, Croatia

II 2G Ex db eb op is IIC T6 Gb

Made in Croatia

II 2D Ex tb op is IIICT 80°Db

....

... 19 ATEX.... P - DAT-

PLFS-N 100 LED -./. 230 V .. W

IP 66 -20 °C<Ta<+40°C/+50°C

295±2

288±2

8. REZERVNI DIJELOVI

8. SPARE PARTS

Spare parts/

Accessories

Description

Code

Spare parts/

Accessories

Description

Code

PLFS-N 100 LED

The glass

protective

framework,

set

PLFS-N 100

LED 10-110

PLFS-N 100 LED

bracket for wall

mounting,

set

PLFS 50-4

20-130

Adapter ADP

23/1

ADP 23/1

Gasket PLFS-N

PLFS-N 100

LED 10-120

Ex db/eb tb 4F

metal cable

gland ISO25

PLFS-N 100

LED 20-110

Connection

chamber,set

PLFS-N 100

LED 10-130

Ex-eb cable

gland ISO25, set

PLFS-N 100

LED 30-110

LED Driver

assembly

PLFS-N 100

LED 10-140

Ex-eb plug

ISO25, set

SPC 25

LED

Carrier assembly

PLFS-N 100

LED 10-150

9. ODGOVORNOSTI I OVLAŠTENJA

9. RESPONSIBILITY AND AUTHORIZATION

Ova Uputa predstavlja najvažniju informaciju o proizvodu.

Nadopunjuju ju odgovarajući nacionalni zakoni i propisi.

Proizvodnja, uporaba, certifikacija i nadzor određene su na

nacionalnoj razini:

a) Pravilnikom o opremi i zaštitnim sustavima namijenjenim za

uporabu u prostorima ugroženim eksplozivnom atmosferom

(NN br. 33/16, odnosno EU Direktiva ATEX 2014/34/EU) i

b) Pravilnikom o najmanjim zahtjevima sigurnosti i zaštite

zdravlja radnika te tehničkom nadgledanju postrojenja,

opreme, instalacija i uređaja u prostorima ugroženim

eksplozivnom atmosferom (NN br. 39/06, 106/07.), odnosno

EU Direktivi 1999/92/EC (ATEX 137).

Odgovorna osoba dužna je osigurati njihovo provođenje u

pogonu.

This instruction is the basic information about the product. It is

completed by the corresponding national laws and regulations.

Production, use, certification and supervision are determined at

the national level:

a) Regulations concerning equipment and protective systems

intended for use in potentially explosive atmospheres EU

directive 2014/34/EU and

b) Regulations on minimum requirements for safety and health

protection of workers and technical inspection of facilities,

equipment, installations and equipment in hazardous areas EU

directive 1999/92/EC (ATEX 137).

The responsible person shall ensure their implementation at the

working facility.

10. SKLADIŠTENJE I TRANSPORT

10. STORAGE AND TRANSPORT

Transport i skladištenje treba vršiti samo u originalnoj ambalaži,

na način istaknut na kartonskoj kutiji.

Transportation and storage of the lamps is only allowed in the

original packaging, as outlined in a cardboard box.

11. JAMSTVO PROIZVOĐAČA

11. MANUFACTURER'S WARRANTY

Proizvođač izdaje jamstvo na proizvod u trajanju od godine dana

prema odredbama Zakona o obveznim odnosima. Ova izjava ima

snagu Jamstvenog lista.

The manufacturer provides a warranty on the product for a period

of one year under the provisions of this user manual and the law

on obligations. This statement has the force of Warranty sheet.

12. OZNAČAVANJE

12. MARKING

Protueksplozijski zaštićena ovjesna svjetiljka PLFS-N 100 LED

označena je s vanjskom označnom pločicom i unutarnjom

naljepnicom:

Explosion protected pendant light fitting PLFS-N 100 LED is

marked with the external and the inner label with technical

data:

Vanjska natpisna pločica sa nazivnim podacima i upozorenjem na

priključnoj komori svijetiljke:

External label with nominal data and warning

on the lamp housing:

Unutarnja natpisna pločica sa nazivnim podacima:

Internal label with nominal data:

Table of contents

Other Tepex Light Fixture manuals

Tepex

Tepex PLFS 50 LED-4 User manual

Tepex

Tepex PSF 28 LED-E User manual

Tepex

Tepex FLX 310 LED User manual

Tepex

Tepex PSF 218E User manual

Tepex

Tepex PSF 28 LED User manual

Popular Light Fixture manuals by other brands

Emos

Emos CLASSIC ZY1431T manual

Westinghouse

Westinghouse Outdoor Lighting Fixture owner's manual

Hedler

Hedler C 12 silent Operation manual

Blizzard Lighting

Blizzard Lighting Puck: CSI manual 

Energetic Lighting

Energetic Lighting ELYSL-5004 Series installation instructions

Lightmaxx

Lightmaxx Shaft 5R user manual

Triarch

Triarch 31083 Assembly instructions

Philips

Philips 32614 Series user manual

IKEA

IKEA TIVED Assembly instructions

Lightolier

Lightolier LP200 specification

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH user manual

Martin

Martin MAC 250 Krypton user manual

Cooper Lighting

Cooper Lighting Halo L3232E Specification sheet

Stageline

Stageline ODW-2410RGBW instruction manual

Light Sky

Light Sky Tornado Series user manual

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U specification

Lightolier

Lightolier Lytespan 83ED17S specification

Lightolier

Lightolier Calculite CS8226 specification