Tatung TME24 User manual
L C D MONITOR
T M E 2 4
Contents
Safety warning and notice
the manual and
marking label eep the user manual for later use.
Thank you to choose the LCD Monitor with LED backlight made by our company, a valuable product with excellent quality and multiple
functions. This machine will bring you more audiovisual enjoyment. Its design can insure user's safety. All machine are strictly tested before
leaving factory. But incorrect use can lead to electric shock or fire. In order to ensure safety and extend its life, please read
carefully before using it and comply with the following safety instructions. Please k
● Power failure or unstable voltage.
● Abnormal sound or smell from the device.
● AC power cord is damaged.
● set is damaged due to falling off, knock or impact.
● Any liquid or foreign matters enter into the set.
Monitor
Monitor
Under Following Conditions
Turn off the set immediately, unplug
the power cord from the power outlet, and
contact authorized maintenance personnel.
Monitor
Warning
Indicate the behaviors that must be prohibited. Indicate the operations that must be performed
May result in casualties Attention May result in personal injury or property losses
1
Safety warning and notice………………………………………1
Features……………………………………………………………3
Mounting and Connecting………………………………………4
Packing list………………………………………………………4
Mounting the Monitor set……………………………………4
Connecting peripheral equipment…………………………6
Panel Control Keys………………………………………………8
Remote Control…………………………………………………9
Basic Operations………………………………………………10
Turning on/Standby…………………………………………10
Signal Source Selection………………………………………10
Menu operation description…………………………………11
Menu setting list………………………………………………12
USB multimedia function……………………………………13
Troubleshooting…………………………………………………16
Technical Specifications………………………………………18
● Only use 100-240VAC, 60/50Hz power supply.
● This must be connected to a three pin socket
outlet for safety.
● All cables can be connected or pull out only after power
supply is turned off.
● Do not fix the set on instable position, or else it may
cause falling off, damage, or even fire.
● Do not put the set in the environment:
1. With direct sunshine, moisture, overheating,
undercooling or heavy dust;
2. With flammable or explosive substance;
3. With flammable or corrosive gas;
4. In bathroom, kitchen, etc.
● Do not use damaged or improper power socket, and
ensure that the plug and socket are connected properly.
● Keep the power plug and socket free of dust and metal
pieces.
● Do not damage the power cord:
1. It is prohibited to refit the power cord;
2. Do not put heavy object on the power cord;
3. Keep the power cord away from heat source;
4. Do not drag the power cord when unplugging.
● Do not connect too many appliances to one power strip,
or else it may cause fire due to high power consumption.
Monitor
Monitor
Monitor
2
Warning
● Do not let open flame (e.g. lit candle) approach the
set, or else it may cause electric shock or fire.
● Do not put the container filled with water on the set,
to avoid electric shock or fire caused by water drop of
splashing.
● Do not penetrate any sharp object, metal or liquid into the
signal connector or air vents, to avoid short circuit and
product damage as well as electric shock.
● The slots on the case is designed to release heat so as to
assure that all inside components will not reach an extra
high temperature and can work normally for a long time.
Please do not cover the holes while place it.
Do not touch the plug with wet hands, or else it may cause
electric shock.
Do not turn on the set in thunderstorm weather;
unplug the power plug to avoid lightning strike.
Do not disassemble the set by yourself, or else it may
cause electric shock or fire. Contact qualified personnel for
maintenance.
Monitor
Monitor
Monitor
Monitor
● If coal gas or other flammable gases leak, do not unplug the power cord of the set or other electric appliances; instead,
close the valve of the gas immediately and open the doors and windows.
Monitor
3
Features
1. High-quality LED backlight LCD screen, energy saving, environmental protection, ultra-thin, brilliant features.
2. Having inter high quality speakers, which will give you purely audiovisual enjoyment and save your table place.
3. Having many ideal connectors, you may directly connect your DVD, vidicon etc. its disport components of input connector let you enjoy
beautiful image effect. The product can be used as a computer monitor with VGA or HDMI connectors.
● Do not let children climb onto the set.
● Keep the small accessories away from children's reach to
avoid swallowing.
● If the set won't be used for a long time, please turn off the
device and unplug the power cord.
● Before cleaning the set, unplug the power cord and wipe
with soft cloth; do not use chemical reagents and avoid
foreign substances entering into the device. Improper
cleaning may damage the appearance or erase the printing
information on the product.
● To adjust the position or angle of the set, please
disconnect all wires and move slowly to avoid falling off.
● Do not rub with hard object, knock at, bend or squeeze the
screen.
● Do not use machine immediately after transfering machine
to the places with high temperature from low temperature,
which will cause fogging inside machine and failures.
● If the screen is broken and the liquid splashes on skin,
please wash with clean water immediately for 15 minutes,
and go to see your doctor.
Monitor
Monitor
Monitor
Monitor
Attention
● To carry the set with hands, please grasp the corners
and hold the bottom; do not apply force on the panel.
● Displaying the same image for a long time or active image with
fixed words, icons will leave "image persistence" on screen
which will not disappear after powering off for a long time. This
undesirable phenomenon is not covered by warranty.
● Healthy watching:
1. Watch in appropriate light; poor light or long time watching
may hurt your eyes.
2. If a headset is used, adjust the volume appropriate to
avoid hurting your hearing.
● Unplug the power cord of the device to cut off the power supply.
● If a power plug or appliance coupler is used as
disconnecting device, it should ensure easy operation.
● Power plug shall be connected reliably. Loose power plugs
may cause sparkle and fire.
● All the technical specifications in the user manual and on the
packaging are subject to changes without prior notice. If
there is slight deviation between the user manual and actual
operation, the latter shall prevail.
Monitor
Monitor
4. Much faster response time will completely eliminate shadow of picture. seeing film and playing game may be more fluent.
6. Wider viewing angle, higher brightness, higher contrast, lower consumption.
7. Intelligent image mode and sound mode can offer you intelligent audiovisual effect.
8. Built-in the latest digital comb filter, which makes image more clear. The internal 3D De-Interlace technique can totally eliminate the
screen dithering caused by interlace signals.
9. Own perfect timing functions, you can set time to turn off. It will be turned off in state of no signals, too.
10. Automatically operated convenient with telecontrol device.
11. Auto-setup function help you set the image to best performance in several seconds in PC mode.
12. Auto color balance adjustment technology takes your machine to the best color setting for all different kinds of display adapters in PC
mode.
13. Automatic denoise technique can greatly eliminate background noise caused by menu interference and the noise caused by weak
signals so as to make the picture on the screen clear.
14. Support USB interface.
Mounting and Connecting
Monitor 2. User manual; 3. Remote control.
5. Enough colours.
USB Support Full HD Streaming media.
Packing list
1.The set;
Mounting the setMonitor
Base installation
Base equipment act as the picture. Equip the
base with the machine according to arrow point,
and lock the bolt tightly.
installation
Installation for VESA Wall Mounting
1. Take off the base
2. Fasten the wall mounting board. (The height can be confirmed by the user)
Wall Mounting subassembly
subassembly
4
Wall Mounting Stand
Wall Mounting Board
Screw
5
3. Fasten the wall mounting stand at the position of VESA on the rear cover with bolts.
4. Spin M4 bolts into the left-right nuts on the wall mounting stand. 3-4 mm of depth from bolts washer to stand is recommended.
5. Hang the machine onto the slot of the wall mounting board. Then lock the two bolts on the sides.
Note: ● Installation method is different because of Hanging arm hardware's .
●
●
structure
Must install the wall pendant on firm wall surface, please do not install this machine on ceiling or vehicles.
Wall-mounting parts are not included in accessories and have to be purchased by the client if needed.
Tips on Installation:
● The set should be mounted near the AC power socket for easy plugging and unplugging.Monitor
10cm
10cm
10cm 7cm
30cm
Mount on the wall Mount on the base
Obstruct the air circulation
● ,
●
●
Please keep this space at least around the as
shown in the figure.
Do not cover the air vents or insert any object into
the enclosure.
Do not put the device in limited space, e.g. Bookcase
or embedded closet, unless the set is properly
ventilated.
Monitor
Monitor
Ventilation
Obstruct the air circulation
Wall
Wall
10cm
30cm
10cm
USB1 interface
USB2 interface
Earphone Socket
Connecting peripheral equipment
You can connect various devices to the Monitor set and view high quality images. If the video device has HDMI, YPbPr/YCbCr, AV, PC and
other video output/input ports. You can select one of them and connect to corresponding input or output ports of the Monitor set. After
connected, press "SOURCE" key, then menu of signal source will be displayed on the
screen. Press the "▲/▼" key on the remote control to select the input signal,
and press "OK" key to confirm. The connecting mode is shown in the figure.
HDMI signal cable
Connect to the AV device
with HDMI interface
HDMI input connection
6
● For your safety, please select appropriate wall mount bracket or base.
● To avoid hurt, it is required to place the set on stable plane, or fix on firm wall.
● Ask qualified personnel to mount the set on the wall. Improper mounting may result in instable set.
● Do not place the set at any place susceptible to mechanical vibration.
● Do not place the set at any place that insects may enter.
● Do not mount the set against air conditioner, or else the internal panel of the display may condense moisture and cause failure.
● Do not place the set at any place with strong magnetic field, or else it may be interfered with and damaged by electromagnetic
wave.
Monitor
Monitor Monitor
Monitor
Monitor
Monitor
Monitor
Connecting power supply
To power socket
(100V-240VAC, 60/50Hz)
Power cable
7
GB R WR
WRY Y WR
WRY
G Green (Y signal cable)
B Blue (Pb/Cb signal cable)
Y Yellow (VIDEO signal cable)
W White(AUDIO-L signal cable)
R Red (AUDIO-R and Pr/Cr signal cables)
Connect t
output interface
o the device with
YPbPr/YCbCr
Component input connection
Audio cable
YPbPr/YCbCr cable
Connect to the devices with AV
input interface (e.g. Monitor)
AV output connection
Audio cable
Video cable
Connect to the devices with AV output
interface (e.g. DVD, VCR, game console)
AV input connection
PC audio cable
VGA cable
Audio cable
Video cable
Video cable
Audio cable
VGA input connection
HDMI signal cable
Connect to the AV device
with HDMI interface
HDMI input connection
GB R WR
WRY Y WR
WRY
G Green (Y signal cable)
B Blue (Pb/Cb signal cable)
Y Yellow (VIDEO signal cable)
W White(AUDIO-L signal cable)
R Red (AUDIO-R and Pr/Cr signal cables)
Connect t
output interface
o the device with
YPbPr/YCbCr
Component input connection
Audio cable
YPbPr/YCbCr cable
Connect to the devices with AV
input interface (e.g. Monitor)
AV output connection
Audio cable
Video cable
Connect to the devices with AV output
interface (e.g. DVD, VCR, game console)
AV input connection
PC audio cable
VGA cable
Audio cable
Video cable
Video cable
Audio cable
VGA input connection
HDMI signal cable
Connect to the AV device
with HDMI interface
HDMI input connection
Remark:
1. The VIDEO-2 and component Y signal of the device share same input interface. AV2 and component audio share same input interface.
2. If an earphone is inserted, the speaker of the set turns off automatically.
3.The peripheral equipment and cables described in this manual should be purchased separately.
Monitor
8
Panel Control Keys
1. Power LED indicator and R
2. SOURCE: Press this menu to enter
the menu and select the signal
source.
3. UP/DOWN:
4. VOL+/VOL-:
. MENU: Press this key to enter the main menu.
6. Power on/Standby.
7. Power switch (press '' I '' end to turn power on, and press ''O'' end to turn power off)
Different models may have different appearances; please refer to the actual device.
emote
receiving window.
In OSD menu, press
the two keys to adjust the items,
which have the same functions as
▲/▼ key on the remote control.
Press these two keys to add or reduce volume. In OSD menu,
press the two keys to adjust the analog value of selected item, which have the
same functions as / key on the remote control.
5
Note:
1
2
4
5
3
67
UP DOWN
PLAY
PAUSE
STOP ROTATE
PREV. NEXT REV. F WD.
INFO 16:9
COLOR
P N
AUDIO
Power
Numerical key
Smart sound
Volume
Info
Time
Color Color system
Return
Zoom
Source
Channel
Menu
Cursor Key
OK
Smart image
Mute
Invalid
Invalid NICAM(optional)
Remote Control
9
Key
POWER ( )
MUTE ( )
Numerical key
F1
SMART S
SMART P
▲▼/
VOL+/VOL-
MENU
SOURCE
UP/DOWN
INFO
Time ( )
Return ( )
16:9
Color
P/N
AUDIO(optional)
OK
/ /
PLAY ( )
PAUSE ( )
STOP ( )
ROTATE ( )
PREV. ( )
NEXT ( )
REV. ( )
F WD. ( )
UsedforoperationsinUSBmode
Remote Control Key Instruction
Function
Switch between normal working and standby
Turn off the sound
Numerical input button
Freeze picture
Switch the audio mode among Standard, Music, Movie, User
Switch the image mode among Standard, Soft, User, Bright
▲/▼: select functions; /: adjust the analog value
Turn up/down the volume
Press this key to call out the main menu
Press this key to display signal source selection menu
In OSD menu, press the two keys to adjust the items, which have
the same functions as ▲/▼ key on the remote control.
System information display switch
Time setting key; press this key to set the power off time
Press this key to return
Switch the display mode
Switch color temperature
Select color system
Select NICAM mode
Confirm the operation
UP
DOWN
Table of contents
Other Tatung Monitor manuals
Tatung
Tatung TME 17 User manual
Tatung
Tatung VL5A9DA User manual
Tatung
Tatung VM7K9 User manual
Tatung
Tatung VM9K9DA P990S User manual
Tatung
Tatung v42emgi User manual
Tatung
Tatung OMNISCAN SERIES User manual
Tatung
Tatung Decca CM-1380F Series User manual
Tatung
Tatung TME43 User manual
Tatung
Tatung TME17A User manual
Tatung
Tatung TME22W User manual
Tatung
Tatung CM-1480 Operating and installation instructions
Tatung
Tatung VM5ERDA User manual
Tatung
Tatung TME32A User manual
Tatung
Tatung none User manual
Tatung
Tatung G5GS Series User manual
Tatung
Tatung L7CMS User manual
Tatung
Tatung TLM-1903 User manual
Tatung
Tatung 7005L User manual
Tatung
Tatung TM32 User manual
Tatung
Tatung 5005L13 User manual
