Synology NAS SA3200D Manual

Synology NAS SA3200D

Hardware Installation Guide

Table of Contents

Chapter 1: Before You Start

Package Contents 3

Synology SA3200D at a Glance 4

Hardware Specication 6

Optional Accessories 7

Safety Instructions 9

Chapter 2: Hardware Setup

Tools and Parts for Component Installation 10

Install Drives 10

Install Memory Modules 12

Install PCle Add-in Cards 15

Install and Remove Rail Kits 16

Expansion Unit Deployment and Topology 18

Start up Your Synology NAS 20

LED Indicator Table 21

Chapter 3: System Maintenance

Replace System Fan 23

Replace Power Supply Unit (PSU) 24

Initial Troubleshooting Guide 24

Chapter 4: Initialize DSM on Synology NAS

Initialize DSM with Web Assistant 25

Learn More 25

Synology_HIG_SA3200D_20191003

Synology NAS SA3200D is an enterprise server consisting of both system hardware and the software

operating system, DiskStation Manager (DSM). This manual will guide you through all conguration aspects

of your SA3200D, including the hardware components, setup procedures, system maintenance, and initial

troubleshooting instructions.

Note: All images below are for illustrative purposes only, and may di󰀨er from the actual product.

Package Contents

Main unit x 1 AC power cord x 2

Screws for 2.5” drives x 52

Screws for 3.5” drives x 52

Before You Start 1

Chapter

4Chapter 1: Before You Start

Synology SA3200D at a Glance

No. Article Name Location Description

1Power Button and

Indicator

Front

1. Press to power on your Synology NAS.

2. To power o󰀨 the Synology NAS, press and hold until you hear

a beep sound and the Power LED starts blinking.

2HA Status Indicator Displays the status of the HA (High Availability). For more

information, see "LED Indicator Table."

3Alert Indicator Displays warnings regarding fan or temperature. For more

information, see "LED Indicator Table."

4Beep O󰀨 Button Press to deactivate the beeping sound that is emitted when a

malfunction occurs.

5Drive Status Indicator Displays the status of drives. For more information, see "LED

Indicator Table."

6Drive Tray Install drives (hard disk drives or solid state drives) here.

7Rail Kit Release Tab Push in and hold to release the Synology NAS from the rail kit

lock.1

1For more information about the rail kit installation, please refer to the Quick Installation Guide that comes with the rail kit.

5Chapter 1: Before You Start

No. Article Name Location Description

8Power Port

Back

Connect power cords here.

9PSU Indicator and Beep

O󰀨 Button

1. Displays the status of the power supply unit (PSU). For more

information, see "LED Indicator Table."

2. Press to deactivate the beeping sound that is emitted when a

malfunction occurs.

10 PSU Fan Disposes of excess heat and cools the PSU.

11 Console Port This port is used for manufacturing use only.

12 PCI Express Expansion

Slot Supports additional PCIe network interface cards.

13 SAS OUT Port Connect to Synology Expansion Unit2here.

14 1GbE LAN Port Connect RJ-45 network cables here.

15 10GBase-T LAN Port Connect RJ-45 network cables here.

16 RESET Button

1. Press and hold until you hear a beep sound to restore the

default IP address, DNS server, and password for the admin

account.

2. Press and hold until you hear a beep sound, then press and

hold again until you hear three beep sounds to return the

Synology NAS to “Ready” status so that DSM can be initialized.

17 Power Indicator Displays the status of the power supply of the controller. For more

information, see "LED Indicator Table."

18 Status Indicator Displays the status of the controller. For more information, see

"LED Indicator Table."

19 Alert Indicator Displays warnings regarding fan or temperature of the controller.

For more information, see "LED Indicator Table."

20 Remove Indicator Displays the status indicating whether the controller is removable.

For more information, see "LED Indicator Table."

2For more information about Synology Expansion Unit supported by your Synology NAS, please visit www.synology.com.

6Chapter 1: Before You Start

Hardware Specication

Item SA3200D

Compatible Drive Type 3.5” / 2.5” SAS x 12

Maximum Raw Capacity • 192 TB (12 x 16 TB HDD)

• 576 TB with 2 x RXD1219sas (Expansion unit)

External Device Port SAS OUT x 1 (Per controller)

LAN Port • 1GbE (RJ-45) x 2 (Per controller)

• 10GBase-T (RJ-45) x 1 (Per controller)

PCIe Slot Gen3 x 8 slots (x8 link) x 1 (Per controller)

Size (H x W x D) (mm) • 88 x 482 x 724 (with server ears)

• 88 x 430.5 x 692

Weight (kg) 19.7

Supported Client • Windows 7 and 10

• Mac OS X 10.11 onward

File System • Internal: Btrfs, ext4

Supported RAID Type • Basic • JBOD • RAID 0 • RAID 1

• RAID 5 • RAID 6 • RAID 10 • Synology RAID F1

Agency Certication • FCC Class A • CE Class A • BSMI Class A

• EAC • VCCI • CCC • KC • RCM • RoHS Compliant

Language Localization

Environment Requirement

• Line voltage: 100V to 240V AC

• Frequency: 50 to 60Hz

•Operating Temperature: 32 to 95˚F (0 to 35˚C)

•Storage Temperature: -5 to 140˚F (-20 to 60˚C)

• Relative Humidity: 5% to 95% RH

Note: Model specications are subject to change without notice. Please refer to www.synology.com for the latest information.

7Chapter 1: Before You Start

Optional Accessories

With Synology accessories, you can customize your Synology NAS to t di󰀨erent business environments without

worrying about compatibility and stability. Visit www.synology.com/compatibility for more information.

•Memory Module

Model Name Picture Description

D4EC-2666-8G 8 GB D4EC-2666 ECC U-DIMM

D4EC-2400-16G 16 GB D4EC-2400 ECC U-DIMM

•PCIe Add-in Card

Model Name Picture Description

E10G18-T2 Dual-port, 10GbE RJ-45

Network Interface Card

E10G18-T1 Single-port, 10GbE RJ-45

Network Interface Card

E10G17-F2 Dual-port, 10GbE SFP+

Network Interface Card

8Chapter 1: Before You Start

•Expansion Unit

Model Name Picture Description

RXD1219sas

12-bay Rackmount type expansion

unit, compatible with 3.5”/2.5” SAS

drives, up to 2 units connections

•Rail Kit

Model Name Picture Description

RKS1317 Sliding rails solutions

•Spare Part

Model Name Picture Description

Disk Tray (Type R7) 3.5"/2.5" Drive Tray

FAN 60*60*51_2 System Fan Module

PSU 500W-RP Module_2 Redundant PSU Module

PSU 500W-RP SET_2 Redundant PSU Set

(Cage x 1, PSU Module x 2)

9Chapter 1: Before You Start

Safety Instructions

Keep away from direct sunlight and away from chemicals. Make sure the environment does not

experience abrupt changes in temperature or humidity.

Place the product right side up at all times.

Do not place near any liquids.

Before cleaning, unplug the power cord. Wipe with damp paper towels. Do not use chemical or

aerosol cleaners.

To prevent the unit from falling over, do not place on carts or any unstable surfaces.

The power cord must plug in to the correct supply voltage. Make sure that the supplied AC voltage is

correct and stable.

To remove all electrical current from the device, ensure that all power cords are disconnected from

the power source.

Risk of explosion if battery is replaced with an incorrect type. Dispose of used batteries appropriately.

CAUTION: Restricted Access Location

This server is intended for installation only in restricted access locations as dened where both these conditions

apply:

• Access is through the use of a lock or tool and key, or other means of security, and is controlled by the

authority responsible for the location.

• Access can only be gained by service persons or by users who have been instructed about the reasons for

the restrictions applied to the location and about any precautions that shall be taken.

Tools and Parts for Component Installation

Please prepare tools and parts below before setting up your Synology NAS:

• A screwdriver.

• At least one 3.5” or 2.5” SAS drive (please visit www.synology.com/compatibility for compatible drive

models).

Warning: If you install a drive that contains data, the system will format the drive and erase all existing data.

Please back up any important data before installation.

• Rail mounting kit. (please see the Optional Accessories section to nd out the suitable rail kit for cabinet

installation)

Warning: We suggest mounting your Synology NAS on a cabinet before installing any drives since the heavy

weight will increase the installation di󰀩culty.

Install Drives

Please follow steps below for drive installation:

1 Open the drive tray:

a Find the small button located on the left side of the drive tray handle. Press the button down, and the drive

tray handle will pop out.

b Pull the drive tray handle out as illustrated below.

2 Install drives:

•For 3.5” drives: Place the drive in the drive tray. Turn the tray upside down and tighten screws into the four

spots indicated below to secure the drive.

Hardware Setup

Chapter

Table of contents

Other Synology Server manuals

Synology

Synology DiskStation User manual

Synology

Synology DS411j User manual

Synology

Synology NAS FS3410 Manual

Synology

Synology RackStatio RS3411xs User manual

Synology

Synology NAS RS3621RPxs Manual

Synology

Synology NAS RS3621xs+ Manual

Synology

Synology RX410 User manual

Synology

Synology NAS DS720+ Manual

Synology

Synology NAS RS2421+ Manual

Synology

Synology NAS FS3400 Manual

Synology

Synology RackStation RS1219+ Manual

Synology

Synology NAS FS6400 Manual

Synology

Synology DiskStation DS410 User manual

Synology

Synology NAS FS2500 Manual

Synology

Synology NAS SA3600 Manual

Synology

Synology DiskStation DS410j User manual

Synology

Synology RackStation RS2418RP+ Manual

Synology

Synology DS-106 Series User manual

Synology

Synology 406 Series User manual

Synology

Synology DS723+ User manual

Synology

Synology DS207 Series User manual

Synology

Synology NAS HD6500 Manual

Synology

Synology DS101 Series User manual

Synology

Synology FX2421 Manual

Popular Server manuals by other brands

HP AlphaServer ES47 Cli reference manual

Dell

Dell PowerEdge R410 Getting started

PowerNAS

PowerNAS CMA quick start guide

Supero

Supero FatTwin F617R3-FT user manual

MSI

MSI P1-109N-L70 user manual

Dell

Dell PowerEdge XE9640 Installation and service manual

Dell

Dell PS4100 Hardware

EtroVISION

EtroVISION EV3151 user manual

NEC

NEC Express5800/T110j System configuration guide

HP ProLiant Gen9 user guide

Compaq

Compaq ProLiant 3000 Maintenance and service guide

Dell

Dell PowerEdge 3YPMN Getting started guide

iRobo

iRobo IPC2U user manual

Nortel

Nortel 1000 Con?guration guide user manual

Asus

Asus AP7500 Hardware reference guide

Avid Technology

Avid Technology AirSpeed 5000 manual

HP Integrity rx2600 overview

Milestone

Milestone Husky IVO 350T Getting started