This instruction describes product function, features
and proper usage.
Content Index
S1
!!
Warning
Note
1. For heat radiation, leave space around the instrument and do
not jam the ventilation holes in the instrument
2. Keep enough space between the instrument and equipment
which generates high frequency and surge.
3. Connect wires correctly
4. Use the instrument under rated load and power supply.\
5. Use standard grade of alcohol to clean the instrument; don't use
paint thinner or similar chemicals
6. Read and understand this instruction carefully before use
7. Don't use the instrument in case the front panel peels of breaks.
1. To avoid electric shock, DON’T touch the AC power supply
terminals after power on.
2. Before power on, please confirm voltage conformity in range of
AC 210~240V, to avoid damage to instrument.
3. Never remove, retrofit or repair the product or contact any
internal components.
4. Tighten screw with 0.74-0.90Nm torque, as loose screws may
cause fire.
5. Use appropriate fuse to ensure power supply line and
input / output line to prevent current impact.
6. Don't use the instrument in occasion of flammable,
explosive gas, discharge of steam.
Warning
Note
S1
Features
S2
S2 Features
Technical specification
S3
S3 Technical specification
Panel Description & Explanation
S4
S4 Parameter Setting &
Programming Mode Selection
Programmable Setting
16 x 4 LCD display
Easy to operate
High Accuracy of Length
Excellent quality, safety and strong resistance to
interference
Display : 16 X 4 LCD Display
Measuring accuracy : + 0.0 1 %
Sensor : Analog Input
Range : Hr 999.59 Min / 99.59 Min.
Supply : 230VAc ± 20 %
Automation & Control
Model No: LEMINAR CARD
Set the UV time
Set the UV time
Range: Hr 99.59 Min.
Range: Hr 99.59 Min.
Range: Hr 99.59 Min.
Range: Hr 99.59 Min.
Range: Hr 99.59 Min.
(Time for which tube have been in
operation)
Range: Hr 99.59 Min.
(Time for which tube have been in
operation)
This parameter will open in to
Password-1
This parameter will open in to
Password-1
This parameter will open in to
Password- 2
This parameter will open in to
Password- 2
This parameter will open in to
Password- 3
This parameter will open in to
Password- 3
This parameter will open in to
Password- 4
This parameter will open in to
Password- 4
This parameter will open in to
Password- 5
This parameter will open in to
Password- 6
This parameter will open in to
Password- 7
This parameter will open in to
Password- 9
This parameter will open in to
Password- 9
Yes / No
Yes / No
SET UV
TIME
SET UV
TIME
TOTAL
TUBE TIME
TOTAL
TUBE TIME
RESET
TOTAL TIME
RESET
TOTAL TIME
SET TOTAL
TUBE TIME
SET TOTAL
TUBE TIME
SET RTC
TIME
SET RTC
TIME
SELECT
CHANNEL
SET LOW
ALARM CH-1
SET LOW
ALARM CH-2
WELCOME
MESSAGE
WELCOME
MESSAGE
Set the total
tube time
Set the total
tube time
Set the total
tube time
Set the total
tube time
Set the time
& date
Set the time
& date
Select channel
for observation
Set low alarm for
channel 1 & error
for channel 1
Set low alarm for
channel 2 & error
for channel 2
Set welcome
message
Set welcome
message
Reset the total time
Reset the total time
Sr.
No.
Sr.
No.
Display
Message
Display
Message
Description
Description
Explanation
Explanation
SIMPLE / BURN MODE PARAMETER
ANALOG MODE PARAMETER
1
1
2
2
3
3
4
4
5
5
6
7
8
6
9
Note: If low alarm will turn on then you will press reset
key then low alarm will turn off
