stayer ISL122K User manual
www.grupostayer.com
ES
IT
GB
FR
P
Manual de instrucciones
Istruzioni d’uso
Operating instructions
Bedienungsanleitung
Kullanma Kilavuzu
Instructions d´emploi
Manual de instruções
Área Empresarial Andalucía - Sector 1
C/ Sierra de Cazorla, 7
28320 - Pinto (Madrid) SPAIN
Email: sales@grupostayer.com
Email: info@grupostayer.com
ISL122K
ISL18
ISL222K
ISL224K
DE
TR
23
8
6
9
5
4
8
8
2
4
3
4
7
9
2
4
7
8
5
10
9
6
3
ISL222K / ISL224K
10
11
9
5
10
11
ISL122 K
ISL222K / ISL224K
0-800/ 0-1800 /
0-2500
0-1100/ 0-2500 /
0-3500
180
1.6
ISL222K - 224K
2x Li-ion
6.1.
ENGLISH
7
7
Power tools ISL122K - IS L18 - ISL222K - ISL224K are
designed for tightening and loosening screws, for drilling
in wood, metal, ceramic and plastic, and impact drilling in
brick, concrete and stone.
1. Contents page
2. Specic safety instructions...........................13
3. Instructions for use........................................13
3.1 Placement Tool.................................................. 13
3.2 Assembly ........................................................... 13
3.3 Electrical connection ......................................... 13
3.4 Illustrated description ........................................ 13
4.Operating instructions............................................ 14
4.1 Placement and testing ..................................... 14
4.2 Tool change...................................................... 14
5. Maintenance and service instructions ................. 14
5.1 Cleaning.......................................................... 14
5.2 Repair service................................................. 14
5.3 Warranty.......................................................... 15
5.4 Disposal and recycling.................................... 15
6. Regulations............................................................. 15
6.1 Technical Data ............................................... 15
6.2 EU declaration of conformity.......................... 15
2. Specic safety instructions
- Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener may
contact hidden wiring. Fasteners contacting a “live” wire
may make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
- Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than
by hand.
- Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
- Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, re, water, and
moisture. Danger of explosion.
- In case of damage and improper use of the battery,
vapours may be emitted. Provide for fresh air and
seek medical help in case of complaints. The vapours
can irritate the respiratory system.
- Use the battery only in conjunction with your
STAYER power tool. This measure alone protects the
battery against dangerous overload.
Use only original STAYER batteries with the voltage
listed on the nameplate of your power tool. When using
other batteries, e. g. imitations, reconditioned batteries or
other brands, there is danger of injury as well as property
damage through exploding batteries.
3. Instructions for use
3.1 Placement Tool
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, re and/or serious injury.
3.2 Assembly
Do not continue to press the On/O switch after
the machine has been automatically switched o.
The battery can be damaged.
To remove the battery 5press the unlocking buttons 9and
pull out the battery downwards. Do not exert any force.
The battery is equipped with a temperature control which
allows charging only within a temperature range of be-
tween 0 °C and 45 °C. A long battery service life is achie-
ved in this manner. Observe the notes for disposal.
3.3 Electrical connection
Battery Charging
Use only the battery chargers listed on the accessories
page. Only these battery chargers are matched to the
lithium ion battery of your power tool.
The battery is supplied partially charged. To
ensure full capacity of the battery, completely
charge the battery in the battery charger before
using your power tool for the rst time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging
procedure does not damage the battery.
The lithium-ion battery is protected against deep
discharging. When the battery is empty, the machine is
switched o by means of a protective circuit: The inserted
tool no longer rotates.
Charge status indicator
The charging status indicator 10 of the magazine, is
composed of two LEDs:
Green: Displayed when the battery is charged.
Red: Displayed when the battery is charging.
Temperature Dependent Overload Protection
When using as intended for, the power tool cannot be subject
to overload. When the load is too high or the allowable
battery temperature range of 0–50 °C is exceeded, the
speed is reduced. The power tool will not run at full speed
until reaching the allowable battery temperature.
3.4 Illustrated description
1 Screwdriver bit
2 Tool holder
3 Locking sleeve
4 Bulb
5 Battery
ENGLISH
8
8
6 Handle
7 On/O switch
8 Rotational direction switch
9 Battery unlocking button
10 Battery charge-control indicator
11 Charger
12 Universal bit holder
4. Operating instructions
Method of Operation
The tool holder 2 with the tool is driven by an electric
motor via a gear and impact mechanism.
The working procedure is divided into two phases:
Screwing in and tightening (impact mechanism in action).
The impact mechanism is activated as soon as the
screwed connection runs tight and thus load is put on the
motor. In this instance, the impact mechanism converts
the power of the motor to steady rotary impacts. loosening
screws or nuts, the process is reversed.
4.1 Placement and testing
Use only original lithium ion batteries with the voltage
listed on the nameplate of your power tool. Using
otherbatteries can lead to injuries and pose a re hazard.
Use of batteries not suitable for the machine can
lead to malfunctions of or cause damage to the
power tool.
Set the rotational direction switch 8to the centre position
in order to avoid unintentional starting. Insert the charged
battery 5into the handle so that it can be felt to engage
and faces ush against the handle.
Reversing the Rotational Direction
The rotational direction switch 8 is used to reverse the
rotational direction of the machine. However, this is not
possible with the On/O switch 7 actuated.
Right rotation: For driving in screws and tightening nuts,
press the rotational direction switch 8 through to the left stop.
Left Rotation: For loosening and unscrewing screws and nuts,
press the rotational direction switch 8 through to the right stop.
Switching On and O
To start the machine, press the On/O switch 7and keep it pres-
sed.
The power light 4 lights up when the On/O switch 7is
slightly or completely pressed, and allows the work area to
be illuminated when lighting conditions are insucient.
To switch o the machine, release the On/O switch 7.
Adjusting the Speed
The speed of the switched on power tool can be variably ad-
justed, depending on how far the On/O switch 7is
pressed.
Light pressure on the On/O switch 7 results in a low
rotational speed. Further pressure on the switch results in
an increase in speed.
4.2 Adjustment operation
Before any work on the machine itself (e. g.
maintenance, tool change, etc.) as well as during
transport and storage, remove the battery from
the power tool. There is danger of injury when
unintentionally actuating the On/O switch.
Inserting
Pull the locking sleeve 3forward, push the insert tool to
the stop into the tool holder 2and release the locking
sleeve 3to lock the insert tool. Use only screwdriver bits
with ball catch 1. Other screwdriver bits can be used with
a universal bit holder with ball catch 12.
Removing
Pull the locking sleeve 3 forward and remove the insert tool.
Tips
Before screwing larger, longer screws into hard materials,
it is advisable to predrill a pilot hole with the core diameter
of the thread to approx. 2/3 of the screw length.
5. Maintenance and service instructions
Before any work on the machine itself, pull the mains
plug. For safe and proper working, always keep the
machine and ventilation slots clean.
Transport
The contained lithium-ion batteries are subject to the
Dangerous Goods Legislation requirements. The user can
transport the batteries by road without further requirements.
When being transported by third parties (e.g.: air transport
or forwarding agency), special requirements on packaging
and labelling must be observed. For preparation of the
item being shipped, consulting an expert for hazardous
material is required.
Dispatch batteries only when the housing is undamaged. Tape
or mask o open contacts and pack up the battery in such a
manner that it cannot move around in the packaging. Please
also observe possibly more detailed national regulations.
5.1 Cleaning
When the battery is no longer operative, please refer to an
authorised after-sales service agent for STAYER power tools. If
the machine should fail despite the care taken in manufacturing
and testing procedures, repair should be carried out by an
after-sales service centre for STAYER power tools.
5.2 Repair service
Our after-sales service responds to your questions concerning
maintenance and repair of your product as wellas spare
parts. Exploded views and information on spare parts can
also be found under: info@grupostayer.com Our customer
consultants answer your questions concerning best buy,
application and adjustment of products and accessories.
5.3 Warranty
Warranty card Included in the documentation that
accompanies this equipment, you should nd the warranty
ENGLISH
9
9
card. You should ll out the card completely and return to
vendor with a copy of purchasing receipt or invoice and
you should receive a receipt.
Note: If you cannot nd the warranty card within the
documentation, you must ask for it through your supplier.
The warranty is limited only to manufacturing defects and
expire if pieces have been removed or manipulated or
repaired other than the manufacturer.
5.4 Disposal and recycling
The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into household waste!
According the European Guideline 2012/19/
CE for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable
must be collected separately and disposed of
in an environmentally correct manner.
Subject to change without notice.
Battery packs/batteries:
Li-ion:
Please observe the instructions in
section “Transport”.
Do not dispose of battery packs/ba-
tteries into household waste, re or
water. Battery packs/batteries should
be collected, recycled or disposed of
in an environmental-friendly manner.
Only for EC countries:
Defective or dead out battery packs/batteries must be
recycled according the guideline 2006/66/CE.
6. Regulations
6.1 Technical Data
= Battery
= Voltage
= Battery Power
= charging time
= no load speed
= Percussions
=Torque
= Inserting chuck
=Weigth
= Sound power level
=Sound pressure level
=Vibration
The values given are valid for nominal voltages [U]
230/240 V ~ 50/60 Hz - 110/120 V ~ 60Hz. For lower
voltage and models for specic countries, these values
can vary. Please observe the article number on the type
plate of your machine. The trade names of the individual
machines may vary.
Noise/Vibration Information
Measured sound values determined according to EN
60745. Typically theA-weighted noise levels of the product
are: Sound pressure level 87 dB(A); Sound power level 98
dB(A). Uncertainty K =3 dB.
Wear hearing protection
Vibration total values a (triax vector sum) and uncertainty
K h determined according to EN 60745:
Impact tightening of fasteners of the maximum capacity of
the tool: a =9m/s2, K =1.5 m/s2. h
The vibration emission level given in this information sheet
has been measured in accordance with a standardised
test given in EN 60745 and may be used to compare
one tool with another. It may be used for a preliminary
assessment of exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for dierent
applications, with dierent accessories or poorly maintained,
the vibration emission may dier. This may signicantly
increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched o or when
it is running but not actually doing the job. This may signicantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the eects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
6.2 EU declaration of conformity
The undersigned: STAYER IBERICA, S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.: +34 902 91 86 81 / Fax: +34 91 691 91 72
CERTIFICA
That the machine:
Type: IMPACT WRENCH
Models: ISL122 - IS L18 - ISL222 - ISL224
We declare under our sole responsibility that this product
is in conformity with the following standards or standardi-
zed documents: EN 60745-1, EN 60745-2-2, EN 55014-1,
EN 55014-2, EN 61000-3-2, EN 61000-3-3 according to
EU Regulations 2006/42/CE, 2014/30/EU, 2011/65/EU
January 2017
Ramiro de la fuente
Managing Director
www.grupostayer.com
Área Empresarial Andalucía - Sector 1
C/ Sierra de Cazorla, 7
28320 - Pinto (Madrid) SPAIN
Email: sales@grupostayer.com
Email: info@grupostayer.com
Other manuals for ISL122K
2
This manual suits for next models
3
Table of contents
Other stayer Power Tools manuals
stayer
stayer MINI COM 12V User manual
stayer
stayer BHL112BK User manual
stayer
stayer ISL20 User manual
stayer
stayer BJ120 User manual
stayer
stayer ISL120K User manual
stayer
stayer PR10E User manual
stayer
stayer VAC L 18 User manual
stayer
stayer SD27BE User manual
stayer
stayer MULTI RAZER 85 User manual
stayer
stayer S90PE User manual
stayer
stayer S110PE User manual
stayer
stayer S90PE User manual
stayer
stayer P910 B User manual
stayer
stayer CD125 User manual
stayer
stayer PR10EK User manual
stayer
stayer HDB L20 User manual
stayer
stayer SUH2000E User manual
stayer
stayer PH82 User manual
stayer
stayer CD125 User manual
stayer
stayer IW 550 User manual
