StarTech.com 8STSDOCK1EU3P2 User manual

Manual Revision: 10/16/2018

User Manual

For the latest information and specications visit

www.startech.com/SDOCK1EU3P2

Standalone Hard Drive Eraser | USB 3.0 Dock

Actual product may vary from photos

SKU#:SDOCK1EU3P2

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Compliance Statements

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit dierent from that to

which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

For the State of California

WARNING: Cancer and Reproductive Harm

www.P65Warnings.ca.gov

Use of Trademarks, Registered Trademarks, and other

Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and

other protected names and/or symbols of third-party companies not related in

any way to StarTech.com. Where they occur these references are for illustrative

purposes only and do not represent an endorsement of a product or service

by StarTech.com, or an endorsement of the product(s) to which this manual

applies by the third-party company in question. Regardless of any direct

acknowledgement elsewhere in the body of this document, StarTech.com

hereby acknowledges that all trademarks, registered trademarks, service marks,

and other protected names and/or symbols contained in this manual and

related documents are the property of their respective holders.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Safety Statements

Safety Measures

• Wiring terminations should not be made with the product and/or electric

lines under power.

• Product installation and/or mounting should be completed by a certied

professional as per the local safety and building code guidelines.

• Cables (including power and charging cables) should be placed and routed

to avoid creating electric, tripping or safety hazards.

Mesures de sécurité

• Les terminaisons de câblâge ne doivent pas être eectuées lorsque le produit

et/ou les câbles électriques sont sous tension.

• L’installation et/ou le montage du produit doit être réalisé par un

professionnel certié et dans le respect des normes locales et du code de

construction local.

• Les câbles (y compris les câbles d’alimentation et de chargement) doivent

être placés et acheminés de façon à éviter tout risque électrique, de chute ou

de sécurité

安全対策

• 電源が入っている状態の製品または電線の終端処理を行わないでくださ

い。

• 製品の設置やマウントは、使用地域の安全ガイドラインおよび建築基準に

従い、有資格の専門業者が行うようにしてください。

• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回し

を行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよう

にしてください。

Misure di sicurezza

• I terminiali dei li elettrici non devono essere realizzate con il prodotto e/o le

linee elettriche sotto tensione.

• L’installazione e/o il montaggio dei prodotti devono essere eseguiti da un

tecnico professionale certicato che conosca le linee guida locali sulle norme

edilizie e sulla sicurezza.

• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati

e stesi in modo da evitare pericoli di inciampo, rischi di scosse elettriche o

pericoli per la sicurezza.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Säkerhetsåtgärder

• Montering av kabelavslutningar får inte göras när produkten och/eller

elledningarna är strömförda.

• Installation och/eller montering får endast göras av behöriga yrkespersoner

och enligt gällande lokala förordningar för säkerhet och byggnormer.

• Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så

sätt att risk för snubblingsolyckor och andra olyckor kan undvikas.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Table of Contents

Compliance Statements........................................................................1

Safety Statements..................................................................................2

Product Diagram....................................................................................5

Front View.................................................................................................................................................... 5

Rear View...................................................................................................................................................... 6

Product Information..............................................................................7

Packaging Contents ................................................................................................................................. 7

Product Functionality............................................................................7

Erasing a Drive............................................................................................................................................ 7

Erasing a Drive Using Custom Settings............................................................................................. 8

Changing Custom Erase Settings........................................................................................................ 9

Viewing Eraser Details............................................................................................................................. 9

Updating the Eraser Firmware.............................................................................................................. 10

Changing the Order of the Erase Mode Menu ............................................................................... 10

Setting the Date and Time..................................................................................................................... 11

Printing and Saving Log Records ........................................................................................................ 11

Deleting Log Records .............................................................................................................................. 12

Resetting the Password........................................................................................................................... 12

Printing a Receipt...................................................................................13

Connecting the Eraser to a Computer ................................................14

LED Indicators............................................................................................................................................. 15

Erase Modes ............................................................................................16

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Additional Information .........................................................................17

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Product Diagram

Actual product may vary from photos

Front View

Eject

Button

ESC

Button

LED

Indicators

Drive Bay

LCD

Display

Navigation

Buttons (2)

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Rear View

RS232

Serial

Based

Printer

Port USB 3.0

Port

Power

Jack

Power

Button

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Product Information

Packaging Contents

• Hard Drive Eraser and USB 3.0 Dock x 1

• USB 3.0 Cable x 1

• Universal Power Adapter x 1

• Power Adapter Plugs (NA/EU/UK/AU) x 4

• Quick Start Guide x 1

Requirements

• Default password 123456

Product Functionality

Erasing a Drive

Before you select any of the nine erase modes, make sure that

you back up any important data on the drive that you want to

erase.

1. Plug one end of the universal power adapter into the power

jack on the back of the eraser and the other end into a power

source.

2. Use the Power button on the back of the eraser to turn it on.

3. Place the drive that you want to erase in the drive bay. Make

sure to push down on the drive to make sure that it’s secure

in the eraser.

4. To select an erase mode, use the Menu navigation buttons

on the front of the eraser to move up and down in the Erase

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

mode menu.

5. Press the OK button.

Warning! After you press the OK button, don’t remove the

drive from the eraser until it has nished erasing. Removing

the drive before the erase is complete may result in damage

to the drive.

6. When the drive is erased, the LCD display indicates that the

process is complete. If a serial printer is connected to the

eraser, a receipt prints out.

7. To remove the drive, press the Eject button.

Erasing a Drive Using Custom Settings

Before you erase a drive, make sure that you back up any

important data on the drive that you want to erase.

1. Plug one end of the universal power adapter into the power

jack on the back of the eraser and the other end into a power

source.

2. Use the Power button on the back of the eraser to turn it on.

3. Place the drive that you want to erase in the drive bay. Make

sure to push down on the drive to make sure that it’s secure

in the eraser.

4. Use the Menu navigation buttons on the front of the eraser

to move up and down in the Erase mode menu.

5. Select Custom Erase and press the OK button.

6. Select Run <x> Pass and press the OK button.

7. When the drive is erased, the LCD display indicates that the

This manual suits for next models

Table of contents

Other StarTech.com Docking Station manuals

StarTech.com

StarTech.com USBVGADOCK User manual

StarTech.com

StarTech.com DK30CHPH User manual

StarTech.com

StarTech.com USB6N1DOCK User manual

StarTech.com

StarTech.com DK31C3HDPD User manual

StarTech.com

StarTech.com USB3SDOCKDD User manual

StarTech.com

StarTech.com SDOCKU313E User manual

StarTech.com

StarTech.com SDOCKU33BV User manual

StarTech.com

StarTech.com TB3DK2DPW User manual

StarTech.com

StarTech.com 8STUSB3DDOCKFT User manual

StarTech.com

StarTech.com SATDOCKU3S User manual

StarTech.com

StarTech.com USB3SDOCKHDV System manual

StarTech.com

StarTech.com SATDOCK25U User manual

StarTech.com

StarTech.com UNIDOCKU33 User manual

StarTech.com

StarTech.com DK31C3HDPDUE User manual

StarTech.com

StarTech.com SATDOCK22U3S User manual

StarTech.com

StarTech.com 116N-USBC-DOCK User manual

StarTech.com

StarTech.com 8STSDOCK2U33 User manual

StarTech.com

StarTech.com DK31C3MNCR User manual

StarTech.com

StarTech.com SDOCK4U33E User manual

StarTech.com

StarTech.com SATDOCKCRH User manual

StarTech.com

StarTech.com SDOCK2U313 User manual

StarTech.com

StarTech.com DKWG30DPHPD User manual

StarTech.com

StarTech.com USB3SDOCKD User manual

StarTech.com

StarTech.com SDOCK4U33 User manual

Popular Docking Station manuals by other brands

Sony

Sony Dream Machine XDR-DS12iP user manual

Acer

Acer USB Type-C Dock II user manual

ATEN

ATEN UC-2000 user manual

Xcellon

Xcellon HDD-202 user manual

Dok

Dok CR09 user guide

Philips

Philips BTM630/12 quick start guide

IOGear

IOGear Travel Pro GUD3C09 quick start guide

RKI

RKI SDM-E2 Operator's manual

iHome

iHome iP15 instruction manual

VITURE ONE

VITURE ONE MOBILE DOCK quick start guide

Lindy

Lindy 42984 user manual

CipherLab

CipherLab 8001 quick guide

Pyle

Pyle PIPDSP2 owner's manual

Avol

Avol AS2350 user manual

Datalogic

Datalogic JoyaTouch quick start guide

Philips

Philips DC190/79 user manual

Targus

Targus DOCK315EUZ user guide

Akasa

Akasa DuoDockX3 AK-DK08U3-BK user manual