StarTech.com USB21000S2 User manual

Manual Revision: 04/02/2012

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

USB21000S2

USB 2.0 to Gigabit Ethernet Adapter

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use ofTrademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Introduction............................................................................................1

Packaging Contents ................................................................................................................................. 1

System Requirements.............................................................................................................................. 1

Installation ..............................................................................................2

Driver Installation...................................................................................................................................... 2

Hardware Installation .............................................................................................................................. 2

Verifying Installation................................................................................................................................ 3

Specications..........................................................................................4

Technical Support ..................................................................................5

Warranty Information............................................................................5

Instruction Manual

Introduction

The USB21000S2 USB 2.0 to Gigabit Ethernet Adapter adds a single RJ45 Ethernet

port to a USB-enabled computer system, with support for link speeds of 10/ 100/ 1000

Mbps.

Backward compatible with older USB 1.x computer systems, this compact and portable

USB network adapter oers an ideal desktop replacement network adapter or laptop

accessory. With support for features such as Jumbo Frames, VLAN tagging and Wake on

LAN (WOL), the adapter is suitable for home and business users alike.

Packaging Contents

• 1 x USB Gigabit Ethernet Adapter

• 1 x Driver CD

• 1 x Instruction Manual

System Requirements

• USB enabled computer with available USB port

• Microsoft® Windows® 2000/ XP/ Server 2003/ Vista/ Server 2008 R2/ 7 (32/64-bit), or

Apple® Mac OS® 10.6, or Linux®

Link LED

Activity LED

USB type A

connector

RJ45 Ethernet

connector

Instruction Manual

Installation

Driver Installation

Windows 2000/XP/Server 2003/Vista/Server 2008 R2/7

1. Upon starting Windows, insert the included Driver CD into the computer’s CD/DVD

drive.

2. AutoPlay may automatically launch and display all of the folders on the CD or give

you the option to view les and folders on the CD. If not, open “My Computer” and

double-click on the CD/DVD drive.

3. Navigate to the folder for your operating system version (i.e. Windows). Double-

click the le “Setup.exe”.

4. This will launch the driver Installation wizard. Continue through the wizard and

once complete, driver will be installed.

5. Reboot the computer and the network adapter will be ready for use.

Mac OS 10.6

1. Upon starting Mac OS, insert the included Driver CD into the computer’s CD/DVD

drive.

2. Open a Finder window, and click on the CD icon in the Sidebar.

3. Navigate to the folder for your operating system version (i.e. Mac). Double-click the

driver installation le (*.pkg).

4. This should launch the driver Installation wizard. Continue through the wizard and

once complete, all the necessary drivers will be installed.

5. Reboot the computer to complete the installation and check the “Network”

preferences in “System Preferences” to verify and congure the network adapter.

Hardware Installation

1. After the drivers have been successfully installed, connect the adapter to an

available USB port on the computer system.

2. The adapter will be automatically recognized and the drivers installed.

3. Once the operating system has completed installing the drivers, a new networking

device should now be available for use.

4. Connect an RJ45 terminated Ethernet cable to the adapter and the green “LINK” LED

should light up to indicate a connection to the network is detected.

5. Make any congurations changes necessary for your network, though the normal

methods oered by your operating system.

Instruction Manual

Verifying Installation

Windows 2000/ XP/ Server 2003/ Vista/ 7

From the main desktop, right-click on “My Computer” (“Computer” in Vista/7), then

select Manage. In the new Computer Management window, select Device Manager

from the left window panel.

In the Device Manager, under the Network Adapters category, you should see a new

USB networking device listed.

Instruction Manual

Specications

Host Interface USB 2.0

Chipset ID SMSC LAN7500

Connectors 1 x USB type A male

1 x RJ45 Ethernet female

LEDs 1 x Gigabit Link

1 x Activity

Supported Standards IEEE 802.3/ 802.3u/ 802.3ab

Link Speeds 10/ 100/ 1000 Mbps

Auto MDIX Support Yes

Full Duplex Support Yes

Enclosure Material Plastic

Operating Temperature 0°C ~ 70°C (32°F ~ 158°F)

Storage Temperature -20°C ~ 75°C (-4°F ~ 168°F)

Humidity 5% ~ 95% RH

Dimensions 275.0mm x 35.0mm x 20.0mm

Weight 40.5g

Compatible Operating Systems

Windows 2000/ XP/ Server 2003/ Vista/

Server 2008 R2/ 7 (32/64-bit),

Apple Mac OS 10.6, Linux

Instruction Manual

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to

provide industry-leading solutions. If you ever need help with your product, visit

www.startech.com/support and access our comprehensive selection of online tools,

documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two year warranty.

In addition, StarTech.com warrants its products against defects in materials

and workmanship for the periods noted, following the initial date of purchase.

During this period, the products may be returned for repair, or replacement with

equivalent products at our discretion. The warranty covers parts and labor costs only.

StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their

ocers, directors, employees or agents) for any damages (whether direct or indirect,

special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,

or any pecuniary loss, arising out of or related to the use of the product exceed the

actual price paid for the product. Some states do not allow the exclusion or limitation

of incidental or consequential damages. If such laws apply, the limitations or exclusions

contained in this statement may not apply to you.

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.

StarTech.com is your one-stop source for every connectivity part you need. From

the latest technology to legacy products — and all the parts that bridge the old and

new — we can help you nd the parts that connect your solutions.

We make it easy to locate the parts, and we quickly deliver them wherever they need

to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to

the products you need in no time.

Visit www.startech.com for complete information on all StarTech.com products and

to access exclusive resources and time-saving tools.

StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology

parts. StarTech.com was founded in 1985 and has operations in the United States,

Canada, the United Kingdom and Taiwan servicing a worldwide market.

Table of contents

Other StarTech.com Adapter manuals

StarTech.com

StarTech.com USBBT1EDR4 System manual

StarTech.com

StarTech.com MHD2HDF11 User manual

StarTech.com

StarTech.com USB32DP24K60 User manual

StarTech.com

StarTech.com USB312SAT3CB User manual

StarTech.com

StarTech.com ICUSB1284 User manual

StarTech.com

StarTech.com ICUSB232PROC User manual

StarTech.com

StarTech.com 35S24M2NGFF User manual

StarTech.com

StarTech.com WIFI2HDMCGE User manual

StarTech.com

StarTech.com SLMPT2VGA User manual

StarTech.com

StarTech.com 8STICUSB232SM3 User manual

StarTech.com

StarTech.com ST2000PEXPSE System manual

StarTech.com

StarTech.com PCI150WN1X1 User manual

StarTech.com

StarTech.com PEXM2SAT32N1 User manual

StarTech.com

StarTech.com US1GA30SFP User manual

StarTech.com

StarTech.com MHD2VGA User manual

StarTech.com

StarTech.com ST1000BT32 User manual

StarTech.com

StarTech.com SP122DP2HD User manual

StarTech.com

StarTech.com TB3ESATU31 User manual

StarTech.com

StarTech.com USB312SAT3 User manual

StarTech.com

StarTech.com S2510U33USM User manual

StarTech.com

StarTech.com 167B-USBC-MULTIPORT User manual

StarTech.com

StarTech.com US1GC30SFP User manual

StarTech.com

StarTech.com DUAL-M2-PCIE-CARD-B User manual

StarTech.com

StarTech.com DVI2DPA User manual

Popular Adapter manuals by other brands

PCB Piezotronics

PCB Piezotronics 090B274 Installation and operating manual

Auvidea

Auvidea J20 Technical reference manual

Gossen MetraWatt

Gossen MetraWatt AT3-III E operating instructions

Akribis

Akribis ITF-21-BISS-MIT user manual

Tenda

Tenda W54U user guide

ROHO

ROHO AGILITY Operation manual

PROLiNK

PROLiNK WN2001 Quick installation guide

Hawking

Hawking HUF2 Specifications

Airlink101

Airlink101 AWLC4030 user manual

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter user manual

Philips

Philips SWA4554S/10 user manual

JVC

JVC TS-C9D2B Assembly and installation instructions

NETGEAR

NETGEAR A6100 quick start

D-Link

D-Link DWA-121 Quick install guide

Philips

Philips SWA2037 Specifications

Basalte

Basalte 0610-20 installation manual

Yealink

Yealink EHS40 user guide

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A installation guide