Star Micronics SLIP SP298 SERIES User manual

Removing the protective materials

Fourprotectivematerialsareinsertedintotheprintertoprotectcomponentsduring

shipping. Before using the printer, be sure to remove all protective materials as

shown in the illustration.

❏Remove the two pieces of protective tape.

❏Pull the protective sheet straight out toward the front of the printer.

❏Push in the side of the printer cover and lift it upward to remove it.

❏Remove the packing materials.

Note that it is a good idea to keep all protective materials in case you will need to

pack the printer up again and send it somewhere at a later date.

SP298 80871055

Printer cover

Packing

material

Protectivesheet

Protective tape

Protective tape

CAUTION

AutoSide Loading™

This printer is equipped with paper sensors, so you do not have to perform any

special procedure to align the location from which printing should start. Simply

insert the paper into the printer and the sensor locates the top of the paper. The

paper will be moved automatically into position for printing.

❏Make sure that the printer is plugged in and turned on.

❏Check that the RELEASE indicator on the control panel is lit. If the indicator is

not lit, press the RELEASE button until the indicator lights up.

❏Place a piece of the paper onto the printer's document table and slide its right

edge into the printer. Printing will be performed on the side of the paper that is

facing up (the one you can see), starting from the top of the paper.

Important!

•Do not use wrinkled or curled paper. In case of multiple paper, neatly align the

sheets.

•When inserting the paper into the printer, make sure that there are at least 3 cm

between the top edge of the paper and the print start position mark on the printer.

Otherwise the paper sensor may not be able to correctly locate the top of the

paper.

❏Push the right edge of the paper into the printer until it stops. At that time, the

PAPER OUT indicatorwillgoout,andtheprinter mechanism will automatically

align the paper for printing from the top.

❏Send data from your host computer to be printed on the paper.

At least 3cm

Print start position mark

Other manuals for SLIP SP298 SERIES

2

Table of contents

Other Star Micronics Printer manuals

Star Micronics

Star Micronics NX-100 User manual

Star Micronics

Star Micronics LaserPrinter4 User manual

Star Micronics

Star Micronics TSP100IIIU Mounting instructions

Star Micronics

Star Micronics NX-1000 User manual

Star Micronics

Star Micronics 4111 Instructions for use

Star Micronics

Star Micronics TSP200 Series User manual

Star Micronics

Star Micronics DP8340 Series User manual

Star Micronics

Star Micronics NX-1020 User manual

Star Micronics

Star Micronics LC-8211 User manual

Star Micronics

Star Micronics SP320S series User manual

Star Micronics

Star Micronics TSP1000 Series User manual

Star Micronics

Star Micronics SP2000 Operating and maintenance manual

Star Micronics

Star Micronics ND-10/15 User manual

Star Micronics

Star Micronics LC-7211 User manual

Star Micronics

Star Micronics LaserPrinter 8III User manual

Star Micronics

Star Micronics TSP100ECO User manual

Star Micronics

Star Micronics SLIP SP298 SERIES Operating and maintenance manual

Star Micronics

Star Micronics NX-1001 User manual

Star Micronics

Star Micronics NX-10 User manual

Star Micronics

Star Micronics TUP900 Series Quick setup guide

Star Micronics

Star Micronics TSP2000 Series User manual

Star Micronics

Star Micronics NP-215 User manual

Star Micronics

Star Micronics HSP7000 Series User manual

Star Micronics

Star Micronics DP8340R Series User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide