ST STM32MP13-ETZPC User manual
STM32MP13 - ETZPC
TrustZone Address Space Controller
Revision 1.0
Hello, and welcome to this presentation of the STM32MP1
TrustZone Address Space Controller.
1
The Enhanced TrustZone Protection Controller (ETZPC ) is used to:
1. Configure the TrustZone security for Securable IPs
•Peripheral security state can be:
•Secure: Only secure Read and Write access is allowed
•Write-secure : Only secure Write access is allowed. Any read access is allowed.
•Non secure: Any Read and Write access is allowed
2. Configure the SYSRAM and ROM secure region size
•The secure region is defined in multiples of 4KB starting at the bottom address.
Overview
The Enhanced TrustZone Protection Controller (ETZPC ) is
used to:
1) Configure TrustZone security for Securable IPs.
Peripheral security state can be:
•Secure: Only secure Read and Write access is
allowed
•Write-secure : Only secure Write access is
allowed. Any read access is allowed.
•Non secure: Any Read and Write access is
allowed
2) Configure the SYSRAM and ROM secure region size. The
secure region is defined in multiples of 4KB starting at the
bottom address.
2
ETZPC Key Features
• 32-bit APB4 interface
• ETZPC is Write-secure
• Register set to control:
• SYSRAM and ROM secure region size (TZMA0/TZMA1)
• Access rights for securable AHB and APB peripherals
• Security configuration locking for each memory region and each
peripheral.
The TrustZone Address Space Controller has a 32-bit APB4
interface which is write-secure.
It contains registers to program SYSRAM and ROM secure
region size and access rights for securable AHB and APB
peripherals.
The security configuration for each memory region and each
peripheral can be locked.
3
Peripheral security
• Secure resources:
• Not controlled by ETZPC
• ETZPC : write secure only
• TZC, AXIM/GPC, MDMA config, DMA3 config : always secure
• Non secure resources:
• Several peripherals are not concerned by security, they are not controlled by ETZPC
• Securable resources:
• Some peripherals can be either secure, write secure or non-secure according to DECPROT bits
• SYSRAM and BootROM memories have programmable secure region size according to
TZMA0/1 settings
4
Secure resources are not controlled from the ETZPC
The ETZPC itself is always write secure.
The TZC, the AXIM/GPC and the MDMA and DMA3
configuration ports are always secure.
Many peripherals are always non-secure, and are not
controlled by the ETZPC
Securable peripherals can be either secure, write secure or
non secure according to the DECPROT bits in the ETZPC
SYSRAM and BootROM memories have programmable
secure region size according to TZMA0/1 settings
4
Peripheral access vs DECPROT[1:0]
DECPROT[1:0]
MPU access
Peripheral mode
secure non-secure
read write read write
0b00 y y n n Secure peripheral
0b01 y y y n Write-secure peripheral
0b10 yyyyReserved
0b11 yyyyNon-secure
ETZPC controls access to securable resources according to
the DECPROT bits, as shown in this table.
5
Securable IPs
• They are secured by default after reset
• Security property can be changed to write-secure or non-secure by
ETZPC
• Securable Peripheral List:
• VREFBUF, LPTIM2, LPTIM3, LTDC, DCMIPP, USBPHYCTRL, DDRCTRLPHY,
IWDG1, STGENC, USART1, USART2, SPI4, SPI5, I2C3, I2C4, I2C5, TIM12,
TIM13, TIM14, TIM15, TIM16, TIM17, ADC1, ADC2, OTG, TSC, RNG, HASH,
CRYP, SAES, PKA, BKPSRAM, ETH1, ETH2, SDMMC1, SDMMC2, DDRMCE,
FMC, QSPI, SRAM1, SRAM2, SRAM3
Securable IPs are Secure by default after a reset.
The Security property can be changed to write-secure or non
secure in the ETZPC.
6
© STMicroelectronics - All rights reserved.
ST logo is a trademark or a registered trademark of STMicroelectronics International NV or its affiliates in the EU and/or other countries.
For additional information about ST trademarks, please refer to www.st.com/trademarks.
All other product or service names are the property of their respective owners.
Thank you
7
Table of contents
Other ST Controllers manuals
ST
ST L6917BD User manual
ST
ST STM32F101xx series Owner's manual
ST
ST STM32F101 series User manual
ST
ST STM8AF6223 User manual
ST
ST STEVAL-ESC002V1 User manual
ST
ST STEVAL-IAS001V1 User manual
ST
ST STM32F101xx series User manual
ST
ST STM32W-SK User manual
ST
ST EVLSPIN32G4-ACT User manual
ST
ST STEVAL-IHM037V1 User manual
Popular Controllers manuals by other brands
Digiplex
Digiplex DGP-848 Programming guide
YASKAWA
YASKAWA SGM series user manual
Sinope
Sinope Calypso RM3500ZB installation guide
Isimet
Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions
LSIS
LSIS sv-ip5a user manual
Rockwell Automation
Rockwell Automation 1769-L31 installation instructions
