PARTS
BUNK HEADBOARD
SOSTA BED
ASSEMBLY GUIDE
OPTIONAL
Power
Drill
INCLUDED TOOLS
Hex
Bit
4mm Hex
Wrench
1.2” Hex Screw 1.6” Hex Screw
C
C
D
Bracket
B
Headboard
A
(4x)
(2x)
(2x)
(2x)
Enjoy the best assembly experience
sprout-kids.com/headboard
ASSEMBLY VIDEO
If you already have an assembled Sosta Bed, then rst
remove any sideboards.
If installing a headboard for the rst time, skip to Step 5.
2
Next, remove any headboards. To remove, rst unscrew
the two 1.6” Hex Screws that secure the Headboard to
the bed frame.
3D
Remove the 1.2” Hex Screws
securing the brackets to the
headboard posts, and pop out
brackets.
4
D
1With the high-powered drills
available today, the most
signicant assembly issue that
can occur is rounding-out the
hex shape in the head of a hex
screw. If this occurs, it will be
very dicult to remove the screw. To avoid this, please
do the following:
I) Set the clutch on your drill to a LOW SETTING (we
recommend 3).
II) Attempt to install your rst hex screw. The clutch will
most likely start slipping before it screws all the way in.
III) Adjust your clutch up one setting at a time until the
screw goes completely in.
IV) After nding the appropriate setting per your
experience with the rst 3 screws, DO NOT adjust the
clutch setting any more.
V) Later in assembly, if a screw does not screw in all the
way, rst check the screw length to ensure you are using
the correct screw.
VI) If the screw is correct, then use the Hex Wrench to
complete the installation of that screw.
VII) If the screw won’t go in with the Hex Wrench, contact
Customer Support at (833) 530-0033 Mon-Fri 9-4 MST.
3
4
2
1
