SoundPeats Halo User manual
Halo
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch • Manuel d'utilisation
2
English
3 –11
Čeština
12 –20
Slovenčina
21 –29
Magyar
30 –38
Deutsch
39 –47
Français
48 –56
3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz
4
Product Diagram
Voice Assistant Button
Previous Track / Volume Up
Bluetooth Button
Type-C
Multi-function Button
Next Track / Volume Down
Microphone
Halo LED Light
5
Pairing
•Long press the MFB for 1.5s to turn on, the indicator starts to flash blue for 1s,
then Bluetooth speaker enters pairing mode, the indicator flashes in blue and
green alternately.
•Activate Bluetooth on the device and choose “SOUNDPEATS Halo” on Bluetooth
list to pair.
Reset
•Please plug the Type-C charging cable into the speaker, and make sure they are
in charging status.
•Under the power-on status, on press the Bluetooth button for 10s until the
indicator flashes in green twice, reset complete.
6
Enter / Exit stereo Mode
1. Enter stereo Mode
Under the power-on state, long press the Bluetooth button for 3s, the speaker enters
stereo mode. This indicator flashes blue quickly, and the in enters pairing mode and
lasts for 3 minutes.
Note
Under the power-on state, the speaker pairs to the phone at first is the main unit. In
stereo mode, only the main speaker can hold the call.
2. Exit stereo Mode
Long press the Bluetooth button for 3s, again to exit the stere mode, it only works on
the speaker being operated, then the speaker will return to pairing mode after exiting
stereo mode.
Main Speaker
Assistant Speaker
Long Press
for 3s
Pairing Successfully
Main Speaker
Assistant Speaker
Main Speaker
Main Speaker
Assistant Speaker
Assistant Speaker
(Exit stereo Mode)
(Exit stereo Mode)
7
Note:
After exiting stereo mode, only the main speaker can connect with the phone.
Button Control
Power On
Long press the MFB for 1.5s
Power Off
Long press the MFB for 3s
Play/Pause
Press the MFB once
Volume Down
Press the “- “once
Volume Up
Press the “+” once
Previous Track
Long press “+” for 1.5s
Next Track
Long press “-“ for 1.5s
Answer/Hang Up Phone Call
Press the MFB once
Swich Between Two Activate Calls
Long press the MFB for 2s
Disconnect Bluetooth and Enter
Pairing Mode Manually
Press the “Bluetooth button” in the
power-on status
Activate/Close Voice Assistant
Press the “Voice assistant button” once
Activate/Close Ambient Light
Long press “Voice assistant button” for 3s
while the speaker is on
Charge
•Use a Type-C adapter to charge the speaker (current less than 1A). The LED
flashes slowly in red while charging and goes off when fully charged.
•Please charge the speaker at least once per 3 months when not in use for a long
time.
8
Q&A
Q1: How to enter stereo mode?
The stereo mode requires 2 speakers to be used simultaneously. We recommend you to
buy 2 speakers to have better music experience.
Q2: How long can the speaker play with a single charge?
The speakers can work continuously for 8 hours with a single charge. If you don’t use the
speaker for a long time, please turn it off or deactivate your phone Bluetooth, the
speaker will power of automatically after 3 minutes.
Q3: Why two speakers cannot enter stereo pairing?
Please confirm that two speakers have connected with mobile successfully. If yes, please
clear the pairing record of speakers from the mobile and make sure two speakers paired
with each other, the LED of mains speakers flashes blue and green, the seconds
speaker’s LED stays green. After that, activate Bluetooth on the mobile, and choose
“SOUNDPEATS Halo” on Bluetooth list to pair.
9
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
•Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation, and service of the
product.
•Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g., during transport,
cleaning by inappropriate means, etc.).
•Natural wear and aging of consumables or components during use (such as
batteries, etc.).
•Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
•If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.
10
EU Declaration of Conformity
Identification data of the manufacturer's / importer's authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440
Subject of the declaration:
Title: Bluetooth speaker
Model / Type: Halo
The above product has been tested in accordance with the standard(s) used to
demonstrate compliance with the essential requirements laid down in the
Directive(s):
Directive No. 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU
Table of contents
Languages:
