Sound2 ZT51000 User manual
2
ZT51000
User Manual
1
Charging Port
AUX Input
Bluetooth Indicator
Battery Indicator
Front Back
Bottom
Power Button & Answer/End Call
Bluetooth® Pairing
Magnetic Base
Microphone
Product Layout
2
2
A. Introduction:
by Jackco is a pair of Bluetooth
speakers. Unique in a way that lets
you cut the cord and enjoy true stereo
music on the go. Connect to your
smartphones, tablets, iPods, or laptops
and just hit
Contents of the box
Bluetooth Speakers
USB Charging Cable
3.5mm audio input cable
Carrying Pouch
2
2
Table of Contents
Product Layout......................................................1
Introduction...........................................................2
Features...................................................................3
Safety Information...............................................4
Set-up.......................................................................5
-Turning Speakers on........................................5
-Pairing with Bluetooth Device.....................6
Taking Calls............................................................ 7
Connecting via 3.5mm AUX in input............8
Recharging Battery..............................................8
Factory Reset Pairing Procedure.................... 9
Troubleshooting................................................ 10
Technical Specifications..................................13
FCC Notice............................................................13
Environmental Protection..............................14
Lithium Battery Caring Tips............................14
Warranty................................................................15
3
B. Features
Two speakers wirelessly connected via Bluetooth
2.0 ch High Fidelity Stereo Sound
Each speaker can be used separately
Built in Microphone for phone calls and video conferencing
AUX input
Rechargeable lithium battery
Magnetic base allows you to attach the speakers to steel surfaces
supports the following standards
-Bluetooth 2.1+
-Advanced Audio Distribution prole (A2DP)
-Hands-free Audio (HFP) and Headset Proles (HSP) for hands free calling capability
-Audio Video Remote Control Prole (AVRCP) for wireless audio and video playback control
2
4
C. Safety Information
Do not expose the speakers to rain, moisture or any liquid. Exposure to liquid or moisture may cause
the speakers to fail and increase the risk of electrical shock or fire.
Do not expose the speakers to open ame, such as candles, camp re, etc.
Under no circumstances should the users make any change or modication to the product or its
accessories. Any changes made may compromise safety, aect the performance of the product and
void the warranty.
In case the battery begins to leak, do not allow your body parts to come in contact with the liquid, If
contact has been made, please wash with plenty of water and seek medical advice.
Do Not expose the product to excessive heat, such as inside a car under direct sunlight where
temperature may exceed 140F (60C) degrees. Battery under extreme heat may generate more
heat, rupture, or ignite. Storing the speakers under such condition may result in degradation in
performance and shorter battery life.
This product contains magnets, which can be harmful to persons wearing pacemaker.
Hearing damage can result from prolong exposure to loud music, please turn down the volume.
The speakers contains lithium batteries, please dispose the speakers properly, following local
regulations. Do not incinerate.
5
D. Set-up
Turning the Speakers On and O:
1. Power on: Lightly press and hold (Power Button) of both speakers at the same time for 4
seconds, Bluetooth Indicator will start blinking and accompanied by power on ring tone.
2. Power o: Lightly press and hold
(Power Button) of one speaker for 4
seconds, Bluetooth indicator will stop
blinking and accompanied with power o
ring tone.
6
Pairing with Bluetooth Equipped Device:
1. Pairing the 2 speakers: Press and hold (Power Button) of both speakers until power is on,
it will enter pairing mode for 10~30 seconds, and accompanied by the Bluetooth indicator
fast blinking. Once it is paired, Bluetooth indicator will blink slowly and accompanied by a ring
tone (Pairing time will vary depending on external interference)
2. Press the (Bluetooth Pairing) once, it will enter into paring mode with cell phone or
Bluetooth device. When the speakers have paired with your device successfully, you be
prompted with a ring tone. On one speaker Bluetooth indicator becomes solid on (Master: Left
Channel), while the other speaker will blink on-o once every 3 seconds (Slave: Right Channel).
Note: You may see two devices on your Apple iPhone, iPad, or iPod. You can pick either one of the devices to pair.
-Press and hold (Bluetooth Pairing) can cancel pairing with cell phone.
-If your device prompts you for a passcode, please enter 0000.
2
7
Taking Calls with your connected to your phone:
When your phone receives an incoming call, a ring tone alert will come from your speaker.
To accept a call:
-Press the (Power Button) on the master speaker.
To end a call:
-Press the (Power Button) on the master speaker.
To reject a call or use call waiting feature, please revert to your phone controls.
2
2
8
F. Recharging Battery:
E. Connecting to via 3.5mm AUX input:
You can use speakers for music play with any device that has 3.5mm Audio out port.
Simply plug in the 3.5mm cable (included) into the speaker and into your device then play
music.
Connect the provided USB cable to the charging port on the
speakers and a USB charging block. Battery Indicator glows red
when battery is charging, and indicator changes to green when
battery is full.
The charging time is approximately 3 hours from an empty battery
2
2
AUX USB
9
G. Factory Reset Pairing Procedure:
1. 2. 3. 4.
Power On Pairing Speakers
4 sec. 30~60 sec.
A B
Complete PairingPair with Device
Press and hold for
4 seconds to power on
the speakers
A.) Press again on
both speakers. Bluetooth
Indicator will be fast
blinking accompanied by a
ringtone.
B.) Allow 30~60 seconds
for the speakers to pair
with each other. Once it is
paired Bluetooth indicator
will blink slowly and
accompanied by a ringtone.
Press the button on one
of the speakers to pair with
your bluetooth device.
Turn on Bluetooth and
search for“Sound²”and
click“Pair”. Play music to
conrm that the pairing
process is complete. If
not, repeat the process.
Bluetooth<
Bluetooth
DEVICES
Now Discoverable
Sound² Not Paired
Note: Please turn o the Bluetooth
connectivity on your device.
Table of contents
