Sony OEP-4 User manual
COLOR VIDEO PRINTER
OEP-4
SERVICE MANUAL
Volume 2 1st Edition
OEP-4
!WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.
!WARNUNG
Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen.Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.
!AVERTISSEMENT
Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien.Afin
de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les
réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.
Pour toute réparation faire appel à une personne compétente uniquement.
1
OEP-4
/Table of Contents
............................................................................3 (J)
....................................................................3 (J)
.........................................................................3 (J)
Manual Structure
Purpose of this manual ...........................................................3 (E)
Related manuals .....................................................................3 (E)
Trademarks .............................................................................3 (E)
1. Spare Parts
1-1. Notes on Repair Parts .....................................................1-1
1-1. .......................................................1-1
1-2. Exploded Views ..............................................................1-2
1-3. Electrical Parts List.......................................................1-20
1-4. Supplied Accessories ....................................................1-42
2. Block Diagram
Overall ............................................................................2-1
3. Schematic Diagrams
CCM-53G .......................................................................3-2
DP-407G .........................................................................3-3
EX-970............................................................................3-3
IF-988G...........................................................................3-4
IF-990G...........................................................................3-4
IF-989G...........................................................................3-5
KY-582G ........................................................................3-6
MA-142G........................................................................3-7
MEC-24G .....................................................................3-25
SE-746 ..........................................................................3-27
SE-747 ..........................................................................3-27
SE-748 ..........................................................................3-27
SE-749 ..........................................................................3-27
SE-750 ..........................................................................3-27
SE-751 ..........................................................................3-27
SE-752 ..........................................................................3-28
SE-753 ..........................................................................3-28
SE-754 ..........................................................................3-28
SE-755 ..........................................................................3-28
SE-756 ..........................................................................3-28
SE-762 ..........................................................................3-28
SU-84 ............................................................................3-29
SU-85 ............................................................................3-29
SU-86 ............................................................................3-29
SU-87 ............................................................................3-29
SW-1200 .......................................................................3-29
Frame Wiring ................................................................3-30
4. Board Layouts
CCM-53G .......................................................................4-2
DP-407G .........................................................................4-2
SW-1200 .........................................................................4-2
EX-970............................................................................4-3
IF-988G...........................................................................4-3
IF-990G...........................................................................4-3
IF-989G...........................................................................4-4
KY-582G ........................................................................4-4
MA-142G........................................................................4-5
MEC-24G .......................................................................4-6
SE-746 ............................................................................4-7
SE-747 ............................................................................4-7
SE-748 ............................................................................4-7
SE-749 ............................................................................4-7
SE-750 ............................................................................4-7
SE-751 ............................................................................4-7
SE-752 ............................................................................4-8
SE-753 ............................................................................4-8
SE-754 ............................................................................4-8
SE-755 ............................................................................4-8
SE-756 ............................................................................4-8
SE-762 ............................................................................4-9
SU-84 ..............................................................................4-9
SU-85 ..............................................................................4-9
SU-86 ..............................................................................4-9
SU-87 ..............................................................................4-9
3 (J)
OEP-4
3 (E)
OEP-4
Purpose of this manual This manual is the service manual Vol. 2 of Color Video Printer OEP-4.
This manual describes the information on maintenance and the service information
such as spare parts, block diagrams, schematic diagrams, and board layouts.
Related manuals In addition to this “Service Manual Vol. 2”, this unit is provided with the manual
below.
..
..
.Service Manual Vol. 1 (Not supplied for products.)
Part No.: 9-879-989-1X
This manual describes the information on the maintenance of this unit, and the
service overview, electrical alignment, troubleshooting, and location and fuctions
of sensors, motors, and mechanical parts.
..
..
.Operating Instruction (Supplied for products.)
Part No.: 2-638-113-1X
These manuals describes the information required for the actual management and
operation of this unit.
..
..
.“Semiconductor Pin Assignments” CD-ROM (Available on request)
This “Semiconductor Pin Assignments” CD-ROM allows you to search for
semiconductors used in Broadcast and Professional equipment.
Part number: 9-968-546-XX
Trademarks Trademarks and registered trademarks used in this manual are follows.
.Memory Stick is a registered trademark of SONY Corporation.
Other system names, product names, and company names appearing in this manual
are trademarks or registered trademarks of their respective holders.
Manual Structure
1-1
OEP-4
Section 1
Spare Parts
1-1.1-1. Notes on Repair Parts
1. Safety Related Components Warning
w
Components marked !are critical to safe operation.
Therefore, specified parts should be used in the case of
replacement.
2. Standardization of Parts
Some repair parts supplied by Sony differ from those
used for the unit. These are because of parts common-
ality and improvement.
Parts list has the present standardized repair parts.
3. Stock of Parts
Parts marked with “o” at SP (Supply Code) column of
the spare parts list may not be stocked. Therefore, the
delivery date will be delayed.
4. Harness
Harnesses with no part number are not registered as
spare parts.
In need of repair, get components shown in the list and
repair using them.
m
.When replacing the MA-142G board or IC910 (MA-
142G board), perform the firmware version upgrade.
For detail, refer to Section 2-5.
.When replacing the thermal head, perform the
adjustment.
For detail, refer to Section 2-3.
1-2 OEP-4
1-2. Exploded Views
Cover Block
BVTT
2.6 x5
BVTT
2.6 x5
BVTT
2.6 x5
BVTT
2.6 x5
BVTT
2.6 x5
A
A
C
C
B
B
PSW3 x6
1
6
2
5
5
3
10
11
12
13
4
15
14
9
816
7
7
7
7
M2.5
Other manuals for OEP-4
1
Table of contents
Other Sony Printer manuals
Sony
Sony DPP-FPHD1 Instruction Manual (Photo Printer) User manual
Sony
Sony UP-960 User manual
Sony
Sony UP-CR10L User manual
Sony
Sony SNAPLAB UP-CR20L Instruction manual
Sony
Sony DPP-FP95 User manual
Sony
Sony UP-DF500 User manual
Sony
Sony DPP-FP55 User manual
Sony
Sony UP-D70 User manual
Sony
Sony DPP-FP30 Fall 2005 User manual
Sony
Sony DPP-FP97 User manual
