Sony Ericsson T60c Manual

Notforcommercialuse

AE/LZT 123 2489 R1 1

Making Data and Fax Calls

Your mobile phone contains a modem similar to the

modems you use to connect your computer to your

home or office telephone service. Rather than connecting

to standard telephone lines, the modem in your mobile

phone allows you to connect your computer to the

mobile telephone system. In places where mobile

network operators provide the necessary support, you

can use your mobile phone to send or receive faxes,

upload or download data files, or access the Internet. An

approved cable (serial or USB) is required to connect

your mobile phone to your computer before making data

or fax calls.

Data, Fax, and Internet Calls

Your phone can handle data, fax, and Internet calls, but

each type of call requires corresponding software that

must be running on your computer.

Data Calls

Data calls are placed to exchange computer files between

two computers. While the data connection is in place,

files can be transferred between the connected

computers, according to the capabilities of the software

in use. When a data call is made, the connection remains

in place until it is closed by one of the computers

involved. To make or receive data calls with your mobile

phone, you must have a properly configured

communications program running on your computer.

Fax Calls

Fax calls are placed to send fax messages. When a fax

message has been sent, your fax software or the

originating fax machine terminates the call. To make or

receive fax calls with your mobile phone, you must have a

properly configured fax program running on your

computer.

Notforcommercialuse

2AE/LZT 123 2489 R1

Internet Calls

Internet calls are placed to Internet Service Providers

(ISP) when you want to use email or access websites on

the Internet. To make Internet calls, you must have an

account with an ISP and a properly configured Internet

access program (browser) running on your computer.

When your software is installed and set up to dial your

ISP, calls can be made using the normal dialing

procedure. Once a connection to your ISP is established,

it remains in place until either you or your ISP

disconnects the call.

There are three different services your phone can use to

connect to the Internet. The installation procedure for

each varies slightly depending on the service that is used.

Check with your service provider to determine which

services are available in your area.

•Regular speed data calls (also known as

asynchronous data calls)

•Regular speed packet-data calls

•High-speed packet data calls (also known as IS-

2000)

Note! Throughout this chapter, all regular speed data

and regular speed packet-data call will be referred

to as “regular speed data calls”. High-speed packet

data calls will be referred to as “high-speed data

calls.”

Quick Net Connect

Quick Net Connect establishes an Internet connection

quickly, easily, and economically. The digital connection

bypasses the typically-used analog modems and connects

to the Internet in a matter of seconds. Contact your

service provider for more information.

Before You Start

Before setting up your phone for data operation, do the

following:

1 You must have a cable to connect your mobile

phone to your computer. There are two types of

cable available:

•The DRS-11 attaches to a serial port on your

PC. It can be used with any operating system

and works for all types of data/fax services. If

you are using high-speed Internet service with

this cable, you may also want to install a high-

speed serial port in your PC. The high-speed

Notforcommercialuse

AE/LZT 123 2489 R1 3

serial port allows you to take full advantage of

the speeds offered with this service.

•The DCU-10 attaches to the USB port of your

computer. It is the recommended cable for high-

speed Internet service. It can only be used if

your PC uses one of the following operating

systems: Windows 98 Second Edition,

Windows ME, or Windows 2000.

2 Confirm that your mobile service provider supports

digital data services in your planned usage area and

that you have the necessary subscription.

3 Confirm that your computer has the following

hardware or software:

a An operating system that supports data access

software, such as Windows 98 or Windows

2000.

b Appropriate fax (class 2.0), Internet access, or

file transfer software. Class 2.0 is different from

Class 2.

4 Download the T60c drivers from

www.SonyEricssonMobile.com/mobileinternet. Be

sure to note where you save the file.

Note! If you are trying to connect to a 25-pin serial

interface port on your computer, you will need a

9-pin to 25-pin serial adapter. You can purchase

this adapter at most computer supply stores.

Understanding This Insert

The following instructions refer to settings in your T60c

and in your PC.

•Text that can be seen in the PC is shown in the

following typeface: Start.

•Text that can be seen in the T60c is shown in the

following typeface: Settings.

•Softkey names are shown in the following typeface:

Select.

Installation

The procedure used for the first-time setup of your

phone and computer depends on your operating system

and the type of cable being used.

•WindowsXP: DRS-11

•Windows98, ME: DRS-11

Notforcommercialuse

4AE/LZT 123 2489 R1

• Windows 2000: DRS-11

•WindowsNT4.0: DRS-11

• Windows 98 Second Edition, ME, 2000: DCU-10

Windows XP Using DRS-11

1 If you plan to use a high-speed serial port, install

and configure it now according to the

manufacturer’s directions. Make sure the speed is

set to 230400 bps.

2 Connect your computer to your phone. The cable

has a plug on one end that matches the receptacle

on the bottom of your mobile phone. The other

end of the cable has a 9-pin female connector that

matches the standard 9-pin serial interface port

connector. Connect one end of the cable to your

mobile phone and the other end to the serial port

on your computer.

3 Make sure the phone is turned on.

4 Reboot the PC. You must logon using an account

with administrator privileges. Contact your

network administrator or help desk for more

information.

5 The PC should detect your phone as “new

hardware” and automatically launch a new

hardware wizard. If it does not, you must manually

setup the T60c. See “Manually Installing T60c

Modem Drivers” on page 7.

6 Click Next to proceed. Select Install from a list or

specific location and click Next.

7 Make sure Include this location in the search is

checked.

8 Click the Browse button and navigate to the

directory where you downloaded the T60c drivers.

Click OK, then click Next to proceed.

9 A window may appear warning you that the driver

has not passed Windows Logo Testing. Click

Continue Anyway.

10 Windows installs the driver. Click Finish to close

the wizard.

11 Set up your data access software according to the

instructions supplied with it. Look for Ericsson

T60c Data Fax Modem in modem list when

configuring software which will access the handset

as a modem.

Notforcommercialuse

AE/LZT 123 2489 R1 5

Windows 98 or Windows ME Using DRS-11

1 If you plan to use a high-speed serial port, install

and configure it now according to the

manufacturer’s directions. Make sure the speed is

set to 230400 bps.

2 Shut down Windows and turn off your PC.

3 Connect your computer to your phone. The cable

has a plug on one end that matches the receptacle

on the bottom of your mobile phone. The other

end of the cable has a 9-pin female connector that

matches the standard 9-pin serial interface port

connector. Connect one end of the cable to your

mobile phone and the other end to the serial port

on your computer.

4 Make sure the phone is turned on.

5 Turn on the PC. The PC should detect your phone

as “new hardware” and automatically launch the

Add New Hardware wizard. If it does not, you

must manually setup the T60c. See “Manually

Installing T60c Modem Drivers” on page 7.

6 The next step depends on the operating system

installed on your PC.

•If you are running Windows 98 Second Edition

(SE), select Search for the best driver for your

device and click Next.

•If you are running Windows ME, select Specify

location of the driver and click Next.

7 Check Specify a location.

8 Click the Browse button and navigate to the

directory where you downloaded the T60c drivers.

Click OK to proceed.

9 Click Next. Windows displays a window indicating

that it found the (best) driver for the device. Click

Next.

10 Windows finishes installing the modem. Click

Finish when prompted.

11 Set up your data access software according to the

instructions supplied with it. Look for Ericsson

T60c Data Fax Modem in modem list when

configuring software which will access the handset

as a modem.

Notforcommercialuse

6AE/LZT 123 2489 R1

Windows 2000 Using DRS-11

1 If you plan to use a high-speed serial port, install

and configure it now according to the

manufacturer’s directions. Make sure the speed is

set to 230400 bps.

2 Connect your computer to your phone. The cable

has a plug on one end that matches the receptacle

on the bottom of your mobile phone. The other

end of the cable has a 9-pin female connector that

matches the standard 9-pin serial interface port

connector. Connect one end of the cable to your

mobile phone and the other end to the serial port

on your computer.

3 Make sure the phone is turned on.

4 Reboot the PC. You must logon using an account

with administrator privileges. Contact your

network administrator or help desk for more

information.

5 The PC should detect your phone as “new

hardware” and automatically launch a new

hardware wizard. If it does not, you must manually

setup the T60c. See “Manually Installing T60c

Modem Drivers” on page 7.

6 Click Next to proceed. Select Search for a suitable

driver and click Next. Make sure Specify a location

is checked. Click Next.

7 Click the Browse button and navigate to the

directory where you downloaded the T60c drivers.

Click Open. Click OK to proceed.

8 Windows displays a windows indicating it found

the driver. Click Next to proceed.

9 A message titled Digital Signature Not Found

appears. Click Yes to proceed.

10 Windows installs the driver. Click Finish.

11 Set up your data access software according to the

instructions supplied with it. Look for Ericsson

T60c Data Fax Modem in modem list when

configuring software which will access the handset

as a modem.

Windows NT 4.0 Using DRS-11

See “Manually Installing T60c Modem Drivers” on page

Notforcommercialuse

AE/LZT 123 2489 R1 7

Windows 98, ME, or 2000 Using DCU-10

Note! If you are running Windows 2000, you must be

logged on with administrator privileges before

proceeding. Contact your network administrator

or help desk for more information.

1 Turn on your mobile phone.

2 Connect the phone to the USB cable.

3 Connect the USB cable to the PC and install it

according to the directions that came with the

cable. The PC identifies it as new hardware and

installs a new serial port named USB Cable

DCU-10.

4 Go to Start, Settings, Control Panel and double

click on System. If running ME, and Modem is not

listed, click on the blue link View All Control

Panel Options.

5 Click on the tab Device manager. Scroll down to

Ports (COM & LPT) and double-click it to

expand the tree.

6 Double-click on the port USB Cable DCU-10.

7 Click on Port Settings.Make sure Bits per second

is set to 230400 bps and Flow control is set to

Hardware.

8 Click OK to close USB port properties windows.

Click OK to close the system properties window.

9 If your PC did not detect your phone, see

“Manually Installing T60c Modem Drivers” on

page 7.

Manually Installing T60c Modem

Drivers

1 Click Start.

2 Click Settings. Note! Window XP users should

skip this step.

3 Click Control Panel.

4 When using:

Windows 98

a Double click on Modems.

Notforcommercialuse

8AE/LZT 123 2489 R1

b If you already have modems installed, Add will

appear as an option. Click Add. Otherwise

proceed to Step 5.

Windows ME

a If modem is not listed click on the blue link

View all control panel options.

b Double click on Modems.

c If you already have modems installed, Add will

appear as an option. Click Add. Otherwise,

proceed to step 5.

Windows NT

aClickonModems.

b If you already have modems installed, Add will

appear as an option. Click Add. Otherwise,

proceed to Step 5.

Windows 2000

a Double click on Phone and Modems.

bClickonModem.

cClickAdd.

Windows XP

aClickonPrinter and Other Hardware.

bClickonPhone and Modem options.

cClickonModems.

dClickAdd.

5 Click on Don’t detect my modem. Then click

Next.

6 Click on Have Disk.

7 Click on Browse. Locate the file you downloaded

from the Sony Ericsson website.

8 Select the Inf. for the T60c.

9 When using:

Windows 98 and Windows ME

Click OK.

Windows NT, Windows 2000, or Windows XP

Click Open.

10 Click OK.

11 Select Ericsson T60c Data Fax Modem and then

click Next.

12 Select the communications port. Then click Next.

13 When using:

Notforcommercialuse

AE/LZT 123 2489 R1 9

Windows 2000

A message box called Digital Signature Not Found

is displayed. Click on Yes.

Windows XP

A box titled Hardware Installation is displayed.

This box indicates the Inf. has not passed the logo

test. Click Continue Anyway.

14 If prompted, enter the dialing properties.

15 Click Finished.

16 You have installed the Inf. File/Drivers for the

T60c Phone.

High-Speed Data Setup

Note! If you are using regular speed data, fax, and

Internet service, you do not need to perform the

steps in this section.

1 Attach the phone to your PC and make sure it is

turned on.

2 In the phone, select Settings, DataFaxModem,

Modem Speed.

3 Select the appropriate speed based on the type of

cable or serial port you are using:

•If you are using a high-speed serial port or the

DCU-10 USB cable with your T60c, then select

230400 bps.

•If you are using a regular serial port with your

T60c, then select 115200 bps.

4 On your PC, navigate to the window containing

the list of installed modems:

Windows NT 4.0, Windows 98, or Windows ME

aGotoStart, Settings, Control Panel.

b Double click on Modems.

Windows 2000

aGotoStart, Settings, Control Panel, Phone and

Modem Options.

bClickModems.

Note! If the Properties button is grayed out, then

restart your PC with the phone attached and turned

on.

Notforcommercialuse

10 AE/LZT 123 2489 R1

Windows XP

aGotoStart, Control Panel, Printers and Other

Hardware, Phone and Modem Options.

bClickontheModems tab. Note: If the

Properties button is grayed out, then restart your

PC with the phone attached and turned on.

5 Select Ericsson T60c Data Fax Modem and click

the Properties button.

Note! For Windows XP, you must also have to click on

the Modem tab after clicking on the Properties

button.

6 Change the setting Maximum Speed or Maximum

Port Speed so that it matches the speed you chose

in your mobile phone:

•If you are using a high-speed serial port or the

DCU-10 USB cable with your T60c, then select

230400 bps.

•If you are using a regular serial port with your

T60c, then select

•115200 bps.

7 Accept the changes.

8 Close the window.

Operation

Making Data and Fax Calls

Review the instructions from your mobile service

provider that describe the procedures and rules for

making and receiving data calls in your area.

To avoid unnecessary airtime charges, terminate your

data calls as soon as you have finished transferring files by

pressing the right soft key.

Making Voice Calls While Connected to

Your Computer

You can originate voice calls when you are not on a data

call. You can receive voice calls if Data/Fax is set to Voice

Calls. Your mobile phone enables you to initiate voice

calls from Windows applications when connected to the

Ericsson Voice Call Dialer. This is particularly useful if

you have contact cards with phone numbers in a contact

management application. You can open a contact card,

click on the phone icon, and originate a call using your

mobile phone. Then you simply pick up your mobile

Table of contents

Other Sony Ericsson Cell Phone manuals

Sony Ericsson

Sony Ericsson S302 User manual

Sony Ericsson

Sony Ericsson Z710i User manual

Sony Ericsson

Sony Ericsson T650i User manual

Sony Ericsson

Sony Ericsson Z750a User manual

Sony Ericsson

Sony Ericsson K660i User manual

Sony Ericsson

Sony Ericsson Z310 User manual

Sony Ericsson

Sony Ericsson K220 Quick reference guide

Sony Ericsson

Sony Ericsson Cyber-shot C905 User manual

Sony Ericsson

Sony Ericsson Cincinnati Bell z300 Quick reference guide

Sony Ericsson

Sony Ericsson W705 Walkman User manual

Sony Ericsson

Sony Ericsson K530i User manual

Sony Ericsson

Sony Ericsson Txt pro Service manual

Sony Ericsson

Sony Ericsson XPERIA X8 User manual

Sony Ericsson

Sony Ericsson Xperia Ray Quick reference guide

Sony Ericsson

Sony Ericsson K800 Quick reference guide

Sony Ericsson

Sony Ericsson T105 User manual

Sony Ericsson

Sony Ericsson K750i User manual

Sony Ericsson

Sony Ericsson WT19i Reference guide

Sony Ericsson

Sony Ericsson V800 SFR Quick start guide

Sony Ericsson

Sony Ericsson J300 Quick reference guide

Sony Ericsson

Sony Ericsson W32S Installation guide

Sony Ericsson

Sony Ericsson W800 User manual

Sony Ericsson

Sony Ericsson T616 User manual

Sony Ericsson

Sony Ericsson K510i User manual

Popular Cell Phone manuals by other brands

Zte

Zte BLADE A520 quick start guide

Nokia

Nokia Lumia 620 user guide

Blackbe;rry

Blackbe;rry KEYone Safety and product information

Bea-fon

Bea-fon X5 Premium quick guide

Blackbe;rry

Blackbe;rry 8707 Series user guide

Blackbe;rry

Blackbe;rry Storm Troubleshooting

LG LM-X420QN user guide

LifeWatch

LifeWatch V user guide

Bea-fon

Bea-fon SILVER LINE SL860 user guide

IKI Mobile

IKI Mobile KF4.5i user manual

Hitech

Hitech HT-850 user guide

Yezz

Yezz Fashion F10 user manual

Point Mobile

Point Mobile PM60 user manual

Blackbe;rry

Blackbe;rry Q10 user guide

Blackbe;rry

Blackbe;rry Bold 9900 user guide

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 user guide

LG LM-K420EMW user guide

ISAFE MOBILE

ISAFE MOBILE IS655.2 operating manual