Sonova Phonak Roger NeckLoop User manual

Roger NeckLoop is a Roger device that upgrades

an amplification system to intelligent dynamic behavior.

This guide is aimed at technicians.

Connect to the mains Connect to Roger microphones

See Roger NeckLoop quick setup guide

Installation Instructions

Roger NeckLoop for

Dynamic SoundField

max.

10 cm

• The distance between the Roger NeckLoop and the room’s

existing amplifier system should be as short as possible.

• The power supply for the Roger NeckLoop and the power

supply for the amplifier can be fed from the same mains.

• Do not place the Roger NeckLoop in a metallic cabinet

(shielding effect could occur).

Placement

• Switch Off the amplifier and the Roger NeckLoop.

• Connect the Roger NeckLoop audio output with the

microphone input of the amplifier. Use

professional-grade audio cables.

• Switch On the amplifier and the Roger NeckLoop.

Connecting the wirings

The correct microphone gain setting is crucial to avoid

acoustical feedback.

• Reduce the input gain of the amplification system

• Position the microphone correctly and switch On

Roger NeckLoop

• Increase the Roger NeckLoop’s volume up to maximum

by pressing the volume button

• Increase the input gain of the amplification system

until acoustical feedback occurs

• Reduce the gain of the amplification system until

the feedback disappears

• Walk around the room and check that every position

is free of feedback

• Reset the Roger NeckLoop’s volume to the middle or

to the newly desired volume by pressing the volume button

Please note: the microphone gain of the classroom

amplification system cannot be accidentally changed.

The volume in the classroom will be set with the Roger

microphone.

Setting the microphone gain

Connection to amplification system

INPUT

3.5 mm Jack cable

-> XLR jack cable

Mic input = 3.5 mm jack

Mic input = 6.3 mm <-> ¼ inch jack

Mic input = XLR

3.5 mm <–> 6.3 mm Jack adapter

Connection to computer (recording) and amplification system

Y-jack splitter

Caution: such connections may cause hum.

Mic input = 3.5 mm jack

Mic input = 3.5 mm

Connection to CAT 855 Lightspeed

A Sonova brand

Connect the the cable adaptor 1 × 3.5 mm, 2 × RCA from the Roger NeckLoop output

and CD/DVD input of the CAT 885 amplifier.

Set the microphone gain

Connect the Roger microphone with the Roger NeckLoop.

Increase the Roger NeckLoop’s volume up to maximum by pressing the volume button.

Turn the volume knob of the CD/DVD input clockwise as far as it will go.

In case of acoustical feedback, decrease the volume of the CAT 855 amplifier incrementally,

until you can walk throughout the room without any acoustical feedback.

Reset the volume level of the Roger NeckLoop’s volume to the middle or to the newly

desired volume by pressing the volume button.

Other Sonova Hearing Aid manuals

Sonova

Sonova Phonak Audéo P User manual

Sonova

Sonova Phonak Vitus+ ITE User manual

Sonova

Sonova Phonak CROS L-R User manual

Sonova

Sonova Phonak Audeo M90-R User manual

Sonova

Sonova Dicsover Moxi Fit 9 User manual

Sonova

Sonova Phonak Naida B User manual

Sonova

Sonova Phonak Virto M Series User manual

Sonova

Sonova unitron T Max SP Pro User manual

Sonova

Sonova Phonak Terra User manual

Sonova

Sonova Unitron Discover Next User manual

Sonova

Sonova unitron Blu Operating instructions

Sonova

Sonova Lyric4 User manual

Sonova

Sonova Pronak Roger Table Mic II User manual

Sonova

Sonova Phonak Bolero M Series User manual

Sonova

Sonova Phonak Virto B90 User manual

Sonova

Sonova Phonak TV Connector User manual

Sonova

Sonova Unitron DX Insera 3 W 312 Dir User manual

Sonova

Sonova Phonak Roger Pen iN User manual

Sonova

Sonova Phonak Virto M User manual

Sonova

Sonova Phonak Audéo P User manual

Sonova

Sonova Phonak Pediatric Care Kit User manual

Sonova

Sonova Phonak Bolero B User manual

Sonova

Sonova Phonak Naida L-SP User manual

Sonova

Sonova Phonak Brio 3 I User manual

Popular Hearing Aid manuals by other brands

Sonic

Sonic Bliss miniBTE user guide

Lexie

Lexie B1 Replacement guide

Widex

Widex FM+DEX User instructions

Siemens

Siemens Triano user guide

Camplicomms

Camplicomms HC-200 user guide

Widex

Widex SUPER 220 S2-VSD user manual

Phonak

Phonak Q90 user guide

Williams Sound

Williams Sound SoundPlus WIR 237 Manual and user guide

Oticon Medical

Oticon Medical Ponto SoundConnector Instructions for use

Siemens

Siemens Life micon user guide

Starkey

Starkey Destiny Operation manual

Audicus

Audicus The Icon instruction manual

Advanced Bionics

Advanced Bionics Slim HP Standard Instructions for use

Widex

Widex DREAM440 THE DREAM SERIES User instructions

Phonak

Phonak myPilot user guide

NIKEN

NIKEN NK-401 instruction manual

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Getting started guide

Sonetik

Sonetik GOHEAR user guide