Sonoff SNZB-01 User manual
eWeLink
eWeLink
>
The device can be operated intelligently via working with the
SONOFF ZigBee Bridge to communicate with other devices.
The device can work wit h other gateways supporting ZigBee 3. 0
wireless protocol. Detailed information is in accordance with the
final product.
Operation instruction
1. Download APP
2. Pull out the battery insulation sheet
>
CR2450
3V
3. Add sub-devices
Connect the Bridge before adding the sub-device
Access eWeLink APP, select the Bridge that you want to connect,
and tap “Add” to add a sub-device. Then long press “RST” reset
button on the device for 5s until the LED indicator flashes three
times, which means the device has entered the pairing mode, and
be patient until pairing completes.
ZBB rid ge
Add ed: 0
No ch ild de vice, pleas e add.
Add
If the addition failed, move the sub-device closer to the Bridge and try again.
Specifications
Model
Battery model
Working voltage
Wireless connection
Working temperature
Working humidity
Material
Dimension
SNZB-01
CR2450
3V
ZigBee (IEEE 802.15.4)
-10~40℃
10-90%RH (non-condensing)
PC
43x43x16mm
CR2450
3V
Reset button LED indicator
Manual switch
SNZB-01 is a ZigBee low-energy wireless switch that allows you to
move to any place. Peel and stick. Connect it with the Bridge and
you can create a smart scene to trigger other devices.
Low-energy Low battery notification Smart scene
You can select to press once, press twice or long press the wireless
switch to control the connected device for various functions.
Product Introduction
Features
Button action instruction
Conne cting
Kee p the de vic e clo se
eno ugh to t he hu b.
25s
Add Devic e
Loo king f or dev ice
3 devices Found
SONOFF ZigBee Bridge supports
connecting multiple sub-devices at the
same time.
Power the Bridge on, access the Bridge page in the eWeLink APP,
and tap “Add”. Then set the sub-device to be paired to the pairing
mode, and be patient until the pairing completes.
>
ZBB rid ge
Add ed: 0
No ch ild de vice, pleas e add.
Add
Delete sub-devices
Long press the reset button on the sub-device for 5s until the LED
indicator flashes three times. In this case, the sub-device is deleted
from the Bridge successfully.
Users can delete sub-devices directly from the sub-device page on APP.
CR2450
3V
>
1. Placed on the desktop for use.
2. Tear off the protective film of the 3M adhesive and stick the
device on the desired area.
Do not install on the metal surface, otherwise it will affect the wireless
communication distance.
Installation methods
The device weight is less than 1 kg.
The installation height of less than 2 m is recommended.
Other manuals for SNZB-01
2
Table of contents
Other Sonoff Switch manuals
Sonoff
Sonoff DUALR2 User manual
Sonoff
Sonoff RE5V1C User guide
Sonoff
Sonoff ZigBee DIY BASICZBR3 User manual
Sonoff
Sonoff 4CH Pro User manual
Sonoff
Sonoff MINIR3 User manual
Sonoff
Sonoff 4CH User manual
Sonoff
Sonoff TH Origin User manual
Sonoff
Sonoff Basic User manual
Sonoff
Sonoff S-MATE2 User manual
Sonoff
Sonoff Pow R2 User manual
Sonoff
Sonoff Pow R2 User manual
Sonoff
Sonoff BASICR4 User manual
Sonoff
Sonoff ZigBee DIY BASICZBR3 User manual
Sonoff
Sonoff DIY TH10 User manual
Sonoff
Sonoff DIY D1 User manual
Sonoff
Sonoff SNZB-01 User manual
Sonoff
Sonoff MINI Extreme User manual
Sonoff
Sonoff SNZB-01P User manual
Sonoff
Sonoff ZBMINI Extreme User manual
Sonoff
Sonoff TX Series User manual
