Sonoff SNZB-01 User manual
SNZB-01
User manual V 1.0
Wireless Switch
中文-------1-6 English-------7-12
使用说明
取出电池绝缘片
eWeLink
eWeLink
1. 下载APP
本设备需要连接SONOFF ZigBee网关进行智能
操作，可与其他产品互联互通。
设备支持其他无线协议为ZigBee 3.0的网关，具体
以实际产品为准。
>
1
2. 添加子设备
>
打开eWeLink APP，选择要连接的网关，点击
"添加" 子设备，然后长按设备 "RST" 重置按钮
5秒直至LED指示灯闪烁3下，设备进入配对状态，
等待设备连接。
CR24 50
3V
ZBB ri dg e
已添加设备:0
暂无子 设备，请 添加
添加
注意：如添加失败，请将设备移近网关后再重新
添加。
添加子设备前，请先连接网关。
2
SONOFF ZigBee网关支持同时连接
多个子设备
ZBB ri dg e
已添加设备:0
暂无子设备，请添加
添加
添加设备
正在连接
请让设 备尽 量靠近 网关
25s
找到设 备
3个设备 已找到
>
先将网关通电，打开eWeLink APP网关页面，
点击添加，然后设置让所需配对的子设备进入
配对状态，等待设备连接。
3
安装方法
方法1：直接放置桌面使用。
注意：请勿安装在金属表面，否则会影响无线通讯距离。
方法2：撕下3M胶保护膜，粘贴在所需区域即可
4
产品介绍
CR24 50
3V
开关按键 重置按钮 LED指示灯
产品参数
产品型号: SNZB-01
电池型号: CR2450
工作电压: 3V
无线连接: ZigBee (IEEE 802.15.4)
工作温度: -10-40℃
工作湿度:10-90%RH(无冷凝)
外壳材料: PC
产品规格: 43x43x16mm
5
删除子设备
长按子设备重置按钮5秒直到LED指示灯闪烁3
下，此时子设备已在网关中删除。
提醒：用户还可在APP子设备界面中删除子设备。
产品特点
SNZB-01是一款低功耗遥控无线开关，可任意
移动位置，即贴即用，还可通过添加场景联动
设置控制其他设备。
低功耗 电量低消息推送
场景联动
按键动作
用户可根据需要选择单击、双击或者长按让设备
执行设置的指令。
CR24 50
3V
6
Operation instruction
Pull out the battery insulation sheet
eWeLink
eWeLink
1. Download APP
The device can be operated intelligently via working
with the SONOFF ZigBee Bridge to communicate with
other devices.
The device can work with other gateways supporting
ZigBee 3.0 wireless protocol. Detailed information
is in accordan ce with the final product.
>
7
2. Add sub-de vices
>CR24 50
3V
ZBB ri dg e
Add ed :0
No ch il d dev ice,p lease add.
Add
Connect the Bridge before adding the sub-device
Access eWeLink APP, select the Bridge that you want
to connect, and tap “Add” to add a sub-device. Then
lo n g press “RST” r e s e t button on th e device for 5s
until the LED ind i cator flas hes three tim e s, w hich
means the device has entered the pairing mode, and
be patient until pairing completes.
If the addition failed, move the sub-device closer
to the Bridge an d try again.
8
SONOFF ZigBee Bridge supports
connecting multiple sub-devices at
the same time.
Conn ec ti ng
Kee p the dev ice c lo se
eno ug h to th e hub.
25s
>
Power the Bridge on, access the Bridge page in the
eWeLink APP, and tap “Add”. Then set the sub-device
to be pair to the pairing mode, and be patient until the
pairing completes.
ZBB ri dg e
Add ed :0
No ch il d dev ice,p lease add.
Add
Add Devic e
Loo king f or dev ice
3 devi ces Foun d
9
Other manuals for SNZB-01
2
Table of contents
Other Sonoff Switch manuals
Sonoff
Sonoff 4CH Pro User manual
Sonoff
Sonoff MINIR3 User manual
Sonoff
Sonoff 4CHPROR3 User manual
Sonoff
Sonoff DUALR3 User manual
Sonoff
Sonoff TH Origin User manual
Sonoff
Sonoff ZigBee DIY BASICZBR3 User manual
Sonoff
Sonoff DIY DUAL R3 User manual
Sonoff
Sonoff D1 User manual
Sonoff
Sonoff DIY D1 User manual
Sonoff
Sonoff TX EU User manual
Sonoff
Sonoff TH10 User manual
Sonoff
Sonoff BASICR3 User manual
Sonoff
Sonoff ZBMINI User manual
Sonoff
Sonoff SNZB-01 User manual
Sonoff
Sonoff POWR3 User manual
Sonoff
Sonoff ZBMINI Extreme User manual
Sonoff
Sonoff DIY POWR3 User manual
Sonoff
Sonoff T1 User manual
Sonoff
Sonoff NSPanel-EU User manual
Sonoff
Sonoff DIY BASIC Series User manual
