Sonoff S-MATE User manual
Switch Mate
User manual V1.2
S S1 S2 S3
L3
L2
LL1
S-MATE
Upper Cover
Battery Compartment
Dip Switch
Features
123
S-MATE is an eWeLink-Remote sub-device, used to connect with an ordinary rocker or pulse
switch. The on/off of the gateway can be controlled at close range by sub-device locally after it
is added to the gateway, and the sub-device can also trigger other smart devices in the smart
scene through the cloud.
ON O FF
ON O FF
ON O FF
ON O FF
Product Introduction
LED indicator
The device weight is less than 1 kg. The installation height of less than 2 m is recommended.
1. Pull out the battery insulation sheet
Operating Instruction
2. Power off
Please install and maintain the device by a professional electrician. To avoid electric shock
hazard, do not operate any connection or contact the terminal connector while the device is
powered on !
3. Wiring instruction
NL in LOut
N
S S1 S2 S3
L3
L2
LL1
LOut
100-240V AC
N N
L
L1
L2
L3
NL in LOut
N
LOut
N N
NL in LOut
N
LOut
N N
The wiring instruction of connecting the S-MATE with three MINIR3:
S
S1
S2
S3
The dip switch is factory set to the right. Please toggle the dip switch to the left if connection
a pulse switch to the device.
S S1 S2 S3
L3
L2
LL1
100-240V AC
L
L1
S
S1
NL in LOut
N
LOut
N N
The wiring instruction of connecting the S-MATE with one MINIR3:
翘板开关
Make sure the neutral wire and live wire connection is correct.
Dip Switch
Rocker Switch
There are L/L1/L2/L3 on the S-MATE which can be used as terminal connectors, but you have
options to directly connect the L wire of MINIR3 to the L wire in the switching box without
going through the S-MATE.
S-MATE
100-240V ~ 50/60Hz 16A Max
PCV0
51x44.5x24mm
-10℃~40℃
100-240V ~ 50/60Hz 16A Max
CR2032
“eWeLink remote” Transmission Distance
Power supply
Battery model
Model
Input
Output
Working temperature
Dimension
3V button cellx 1
Specifications
Shell material
Up to 50M
MIN IR3
Sched ule Time r LoopTim er
Dev iceS ettings
Sho rtcu ts
Ope ration r ecord
>
>
>
>
>
0/32
>
>
Net work in dicat or
>
Ass ign loc ation
Sha re
Crea te grou p
WeCh at cont rol
LAN c ontrol
Devi ce Sett ings
eWeL ink Rem ote Sce ne
eWeL ink Rem ote
Powe r-on Se tting s
>
0/8
eWeLink-Remotesub-devices
4. Add to eWeLink-Remote gateway
Please turn off the electricity before replacing the battery of device.
Replace batteries
Add
SS1
①You are allowed to add S-MATE to the devices that have eWeLink-Remote gateway such as MINIR3
and etc. on their setting page.
②Add S-MATE on Smart Scene to trigger other devices.
Other Sonoff Switch manuals
Sonoff
Sonoff TX Ultimate User manual
Sonoff
Sonoff S-MATE2 User manual
Sonoff
Sonoff DIY TH10 User manual
Sonoff
Sonoff 4CHPROR3 User manual
Sonoff
Sonoff SNZB-01P User manual
Sonoff
Sonoff ZBMINI User manual
Sonoff
Sonoff 4CH Pro User manual
Sonoff
Sonoff DUALR3 User manual
Sonoff
Sonoff TX Series User manual
Sonoff
Sonoff 4CH User manual
Sonoff
Sonoff NSPanel-EU User manual
Sonoff
Sonoff POWR3 User manual
Sonoff
Sonoff BASICR4 User manual
Sonoff
Sonoff Pow R2 User manual
Sonoff
Sonoff Basic User manual
Sonoff
Sonoff Pow R2 User manual
Sonoff
Sonoff DIY MINI User manual
Sonoff
Sonoff ZigBee DIY BASICZBR3 User manual
Sonoff
Sonoff SNZB-01 User manual
Sonoff
Sonoff ZigBee DIY BASICZBR3 User manual
