Soehnle 6958 User manual

6958

Animal scale

User manual

www.soehnle-professional.com

Thank you for choosing this Soehnle Professional product.

Soehnle Professional is a brand of Soehnle Industrial Solutions GmbH.

This product is equipped with all features of the latest technology.

If you have any questions or if you have problems with your device that are not

covered in the operating instructions, please contact your Soehnle Industrial

Solutions service centre or our customer service.

Telephone: +49 7191 3453-220

Fax: +49 7191 3453-211

E-Mail: [email protected]bh

For further information and documentation please refer to:

https://www.soehnle-professional.com/en/site/documents

This manual has been written for the following models:

 Animal scale 6958.01.002

Please read this manual completely before installation and operation.

1. Scope of delivery ........................................................4

2. Warnings .................................................................. 4

3. General information ....................................................5

3.1 Technical Data .........................................5

3.2 Connection types.....................................6

4. Installation .......................................... .......................7

4.1 Unpacking and installation .......................7

5. Controls and functions ................................................9

5.1 Display unit and key descriptions..............9

 5.2Displaycharacterdenitions ....................10

5.3 Terminal display.......................................11

5.4 Meaning of symbols on faceplate.............11

6. Operation ................................................................12

6.1 Normal weighing mode.............................12

6.2 Count weighing mode ..............................14

6.3 Percent weighing mode............................15

6.4 BMI working mode ...................................17

6.5 HOLD function.........................................18

6.6 Accumulation ..........................................19

 6.7Weightne-tuning....................................20

7. Explanation of symbols & Troubleshooting....................21

7.1 Explanation of symbols ............................21

7.2 Troubleshooting.......................................22

Content

 Verify that the input voltage range printed on the data label matches the local

AC power to be used.

 Make sure that the power cord does not pose a potential obstacle or tripping

hazard.

 Use only approved accessories and peripherals.

 Operatetheequipmentonlyunderambientconditionsspeciedintheseins-

tructions.

 Disconnect the equipment from the power supply when cleaning.

 Do not operate the equipment in hazardous or unstable environments.

 Do not immerse the equipment in water or other liquids.

 Service should only be performed by authorized personnel.

1. Scope of delivery

2. Warnings

 Terminal 

 Platform 

 Power supply 

 User manual 

3. General information

3.1 Technical data

Max. display range -999,999to999,999

Max. display resolution 1:100,000(primaryunit)

1:125,000(secondunit)

Max. approved resolution 1:5,000

Division 0.0001,0.0002,0.0005to10,20,50

Calibration unit kg or lb

Weighing units g,lb,lb:oz,g,oz,pcs,%

Display 6-digit,7-segment,25mmheight

LCD with blue backlight

Accuracy ≤0.01%

Power supply 4x AA batteries

or AC adapter: 9V DC / 600 mA with central positive

Work current ≤15mA(backlightoff,noloadcells)

≤30mA(backlighton,noloadcells)

≤50mA(backlighton,oneloadcell)

Functions Normalweighing,counting,percentweighing,

checkweighing,BMI,Hold,Accumulation

Zero range programmable zero range

Tare range full capacity

Stabilization time < 3 seconds

Keypad [HOLD/SETUP],[PRINT/FUNC],[ACC/TOTAL],

[UNIT/DATA],[TARE/PRESET],[ZERO/ON/OFF]

Operating temperature -10°to40°C

Humidity range <90%relativehumidity,non-condensing

Load cell excitation voltage 5V DC

Load cell drive -3mV/Vto3mV/V

Recommended actual scale

interval (d)

> 1 uV / display division

Max. load cell excitation 60 mA

Signal connection 4 or 6 lead with sense leads

Real clock built-innonvolatilerealtime&date

Dimensions of scale 1.040,5x1.000mmperplatform

resp. 1.940 x 1.000 mm complete scale

Dimensions of terminal with bracket: 250 x 125 x 70 mm

without bracket: 200 x 95 x 45 mm

3.2 Connection types

7-pins socket, assigned as follows:

 Pin 1: Excitation + -

 Pin 2: Sense +

 Pin 3: Signal +

 Pin 4: Excitation -

 Pin 5: Sense -

 Pin 6: Signal -

 Pin 7: Shield 7 holes socket (Terminal) 7 pins socket (Base)

3. General information

4.1 Unpacking and installation

Caution:

Do not pull on the load cell cable and connectors during installation, as this may damage the parts.

1. Remove the two platforms 1 & 2 with the same serial number from the boxes and align them as shown

below. Remember to unplug the two connection cables and plugs on each platform..

2. Lift platform 1 as shown below and plug the connection cable of platform 2 into the connection socket on

the terminal box of platform 1.

4. Installation

3. Mount the mounting brackets as shown in the picture below to align two platforms. Note: It is

necessary that the two platforms are loosely connected.

4. Installation

4. Plug the connection cable of platform 1 into the connection socket on the display.

5.1 Display unit and key descriptions

Key Mode Description

HOLD/

SETUP

Weighing, counting

or percent mode

< 3 seconds Enters or exits HOLD mode

> 3 seconds Enters SETUP mode

Input data mode < 3 seconds Returns to last sub-menu

> 3 seconds Input decimal point

Menu selection mode Returns to last sub-menu

PRINT/

FUNC

Weighing, counting

or percent mode

< 3 seconds Sends output data via the serial port

> 3 seconds Selects mode: Weighing, counting or percent

Input data mode

Increases digit in ashing data entry position by one

Menu selection mode Returns to last item of current sub-menu

ACC/

TOTAL

Weighing, counting

or percent mode

< 3 seconds

Adds accumulation values to memory, displays

instances and totals

> 3 seconds Displays accumulation instances and totals

Input data mode

Decreases the digit in the ashing data entry position by 1

Menu selection mode Goes to the next item of current sub-menu

UNIT/

DATA

Weighing mode < 3 seconds Changes weighing unit of measure

Counting or

percent mode < 3 seconds Enters the submenu to input piece weight for counting

or to enter reference weight for percent-weighing

Weighing, counting

or percent mode

> 3 seconds Enters the submenu to input the comparative data

range for check-weighing

Time or date mode

> 3 seconds Enters time or date setting mode

Input data mode

Shifts the ashing data entry position from right to left

Display ADC code Select displaying code from no-lter, lter1, lter2

Menu selection mode Goes to next item of current sub-menu

TARE/

PRE-

SET

Weighing, counting

or percent mode

< 3 seconds Tare the weight

> 3 seconds Enters pre-determined tare input mode

Input data mode Conrms the input data and forwards to next step

Menu selection mode Conrms the input data and forwards to next step

ZERO/

ON-

OFF

Power Off Power On

Weighing, counting

or percent mode

< 3 seconds Zeros the platform weight

> 3 seconds Power off

Input data mode Ignores the modication

Menu selection mode Exits from current working mode

5. Controls and functions

5.2Displaycharacterdenitions

5. Controls and functions

Table of contents

Other Soehnle Scale manuals

Soehnle

Soehnle KSD PLATEAU Instruction Manual

Soehnle

Soehnle Shape Sense Profi 300 User manual

Soehnle

Soehnle 65070 User manual

Soehnle

Soehnle 9055 User manual

Soehnle

Soehnle CWC 7746 User manual

Soehnle

Soehnle 65843 User manual

Soehnle

Soehnle PAGE PROFI 300 User manual

Soehnle

Soehnle 6803 User manual

Soehnle

Soehnle KWD Pure Invite Instruction Manual

Soehnle

Soehnle Body Balance Shape F4 User manual

Soehnle

Soehnle 7700 User manual

Soehnle

Soehnle VENEZIA User manual

Soehnle

Soehnle Exacta DELUXE User manual

Soehnle

Soehnle Web Connect 63339 User manual

Soehnle

Soehnle Body Balance Slim F5 User manual

Soehnle

Soehnle ZETA 63578 User manual

Soehnle

Soehnle Shape Sense Profi 100 User manual

Soehnle

Soehnle 9320 User manual

Soehnle

Soehnle Professional 8320 User manual

Soehnle

Soehnle Cosy User manual

Soehnle

Soehnle 7755 User manual

Soehnle

Soehnle Atlantic User manual

Soehnle

Soehnle Body Balance Slim F5 User manual

Soehnle

Soehnle Food Control Easy User manual

Popular Scale manuals by other brands

AWS

AWS ZEO-50 user manual

Gima

Gima Glass Body Fat Analyzer Use and maintenance book

Seca

Seca 374 user manual

TEC

TEC TEC SL59 SERIES owner's manual

Axis

Axis B/E Series user manual

Alecto

Alecto ACW-40 user manual

Rice Lake

Rice Lake MSI-4260 IS Technical manual

IKA

IKA RCT basic safety control operating instructions

ADE

ADE M20011 operating manual

Duronic

Duronic KS3000 manual

Digi

Digi SM-720 Service manual

Cardinal

Cardinal CS Series Operation manual

Korona

Korona Kastella Instructions for use

A&D

A&D FC-50Ki instruction manual

BDA

BDA CAMARGUE installation guide

Tanita

Tanita HD-357 Instructions for use

Leifheit

Leifheit 03173 quick start guide

Lumme

Lumme LU-1340 user manual