Socket DURASCAN D760 Operating instructions

PROGRAMMING GUIDE

1D/2D/OCR/DOTCODE READER - D760,D860,S760 AND S860

This document pertains to the following D760, D860, S760, S860:

Model

D760 Construction Orange

D760 Safety Green

D760 Utility Gray

Model

S760 Blue

S760 Green

S760 Red

S760 White

S760 Yellow

Model

S860 Black

Model

D860 Black

TABLE OF CONTENTS

COMPANION APP 3

RESETS 3

BLUETOOTH CONNECTION MODE 4

PREFIX/SUFFIX 5

VIBRATE/BEEP MODES 6

ACTIVE MODES 7

PRESENTATION MODES 8

HID KEYBOARD LANGUAGE SETTINGS 9-10

AUTOMATIC RECONNECTION 11

BLUETOOTH CONNECTION ROLES 12

DATA MODE - FOR SPP MODE ONLY 13

PROGRAMMING 14

OCR 15-24

1D SYMBOLOGIES

UPC/EAN 25-35

CODE 128 36

GS1-128 36

CODE 39 37-38

CONVERT CODE 39 TO CODE 32 (ITALIAN PHARMA CODE) 39

CODE 32 PREFIX 39

CODE 93 40

INTERLEAVED 2 OF 5 41

CODABAR 42-43

MSI 44-45

GS1 DATABAR 46-47

2D SYMBOLOGIES

PDF417 48

MICROPDF417 48

DATAMATRIX 48

MAXICODE 48

QR CODE 49

MICROQR 49

AZTEC 49

HAN XIN 49

DOTCODE 49

POSTAL CODES 50-51

SAMPLE BARCODES 52-53

COMPANION APP

Make sure the scanner is not connected to a host computer or device before scanning a command

barcode.

Factory Reset

Congures the scanner to factory defaults. The scanner powers o after scanning this barcode.

Scan QR code with mobile device to

download app.

Scan QR code with mobile device to

download app.

Set up your scanner with Socket Mobile Companion App.

• Easy to follow instructions for pairing scanners

• Check scanner status

• Check warranty and register scanners

Learn more about Application Mode.

RESETS

Pairing Reset

If the scanner is paired with a device, unpair it before trying to connect to a dierent device.

Step 1: Scan barcode (for serial number that begins 1931 and above only).

Or follow steps to manually reset scanner:

A. Power on the scanner.

B. Press and hold down the scan button.

C. Press and hold down the power button.

D. After you hear 3 beeps, release both buttons.

The scanner will unpair and automatically power o.

Step 2: Remove or forget the scanner from the Bluetooth list on the

host device.

The scanner is now discoverable.

Both steps above must be done to complete the unpairing.

BLUETOOTH CONNECTION MODE

Make sure the scanner is not connected to a host computer or device before scanning a command

barcode.

Scan command barcode(s) to congure the scanner.

Basic Mode (HID) (default)

(All host devices)

Congures the scanner to Human Interface Device (HID) mode. The scanner will be discoverable as a

keyboard to other Bluetooth devices.

Application Mode (MFi-SPP) for Apple Devices

*Required for Apple iOS applications developed with Socket Mobile SDK.

Application Mode (Auto Connect-SPP) for Windows or Android 8.0 and later

*Congures the scanner to Serial Port Prole.

Application Mode (SPP) for Windows or Android version 7.0 and lower

*Congures the scanner to Serial Port Prole (SPP).

*For compatible applications developed with Socket Mobile SDK: socketmobile.com/partners/app

You can congure the scanner to automatically add a prex and/or sux to each scan of data. Scanner is

allowed 1 prex and 2 suxes.

For custom prex and sux, contact [email protected].

Note: Scanning multiple commands in a single instance will overwrite (not append) the previous

command.

Sux – Carriage Return (default)

Congures the scanner to add a carriage return after decoded data.

Sux – Tab

Congures the scanner to add a tab after decoded data.

Sux – Carriage Return and Line Feed

Congures the scanner to add a carriage return and line feed after decoded data.

Data As Is

Congures the scanner to return only the decoded data (i.e., no prex or sux).

PREFIX/SUFFIX

Make sure the scanner is not connected to a host computer or device before scanning a command

barcode.

Vibrate “On” (default)

Enable the scanner to vibrate to indicate a successful scan.

Vibrate “O”

Disable the scanner from vibrating to indicate a successful scan.

Beep “On” (default)

Enable the scanner to vibrate to indicate a successful scan.

Beep “O”

Disable the scanner from beeping to indicate a successful scan.

VIBRATE/BEEP MODES

Scan one of the barcodes to recongure the scanner to remain powered on for a longer time.

These settings drain the battery faster. Please ensure the scanner is charged daily.

2 hours (default)

Scanner powers o in 2 hours when idle/inactive while connected and 5 minutes when disconnected.

Continuous Power for 4 hours

Congures the scanner to remain on for 4 hours.

Continuous Power for 8 hours

Congures the scanner to remain on for 8 hours.

Scanner Always On

Congures the scanner to never power o.

ACTIVE MODES

PRESENTATION MODES

Scan one of the barcodes to congure the scanner to automatically scan barcodes.

These settings drain the battery faster. Please ensure the scanner is charged daily.

Mobile Mode (default)

Reverts back to manual scan mode.

#FNB 41FBA50000#

Auto Mode (recommended)

Congures the scanner to switch to presentation mode when power is detected on the charging pins. The

scanner will remain on presentaion mode until the scan button is pressed to exit the mode.

#FNB 41FBA50003#

Detect Mode

Congures the scanner to switch to presentation mode when power is detected on the charging pins. The

automatic scan will continue until power is removed.

#FNB 41FBA50002#

Stand Mode

Scanner is permanently in presentation mode.

#FNB 41FBA50001#

Command barcode is for model D760 and S760 only.

Scan only when the scanner is in Basic Mode (HID prole).

These barcodes are to congure the scanner for dierent languages using Microsoft Windows keyboard

layout.

English (Default)

English UK

French

German

Italian

HID KEYBOARD LANGUAGE SETTINGS

Japanese

Polish

Spanish

Swedish

ANSI Emulation

ANSI Emulation can be slower on Windows systems.

This manual suits for next models

Table of contents

Socket DURASCAN D760 Operating instructions

Popular Barcode Reader manuals by other brands