SnowEx V-Pro 32200 User manual

V-Pro™ UTV Hopper Spreader

32200

Owner's Manual

Original Instructions

This manual is for SnowEx®V-Pro model 32200 UTV hopper spreaders

with serial numbers beginning with 190901 and higher.

February 15, 2020

Lit. No. 74256, Rev. 02

SnowEx, 531 Ajax Drive, Madison Heights, MI 48071-2429 • www.snowexproducts.com

CAUTION

Read this document before operating

or servicing the spreader.

This manual supersedes all editions with an earlier date.

Lit. No. 74256, Rev. 02 3 February 15, 2020

TABLE OF CONTENTS

PREFACE................................................................... 5

Owner's Information Form .................................... 5

SAFETY ..................................................................... 6

Safety Deﬁnitions.................................................. 6

Warning/Caution Labels ....................................... 6

Serial Number Label ............................................. 7

Safety Precautions................................................ 8

Fuses .................................................................... 9

Personal Safety..................................................... 9

Fire and Explosion ................................................ 9

Cell Phones........................................................... 9

Ventilation ............................................................. 9

Battery Safety ....................................................... 9

Torque Chart ....................................................... 10

LOADING ................................................................. 11

Material Weights ................................................. 11

Determining Vehicle Payload.............................. 11

Spreader Speciﬁcations...................................... 11

MOUNTING THE SPREADER............................... 12

OPERATING THE SPREADER ............................. 14

Driving and Spreading on Snow and Ice ............ 14

Spreading Tips.................................................... 14

OPERATING THE SPREADER – CAB CONTROL .15

Powering the Control .......................................... 15

Starting and Stopping Spreader ......................... 15

Controlling Material Application .......................... 16

Cab Control Modes............................................. 16

Cab Control Codes Table ................................... 17

Setup Procedures ............................................... 19

MAINTENANCE ...................................................... 20

Lubrication .......................................................... 20

After Each Use.................................................... 20

Storage ............................................................... 20

At the End of Each Season or

After Extended Storage ................................... 20

Fuse Replacement.............................................. 20

HARNESS WIRING DIAGRAM/

MODULE & CABLES........................................... 21

TROUBLESHOOTING GUIDE...............................22

Lit. No. 74256, Rev. 02 4 February 15, 2020

Lit. No. 74256, Rev. 02 5 February 15, 2020

PREFACE

This manual has been prepared to acquaint you with

the safety information, operation, and maintenance of

your new hopper spreader. Please read this manual

carefully and follow all recommendations. This will

help ensure proﬁtable and trouble-free operation of

your hopper spreader. Keep this manual accessible. It

is a handy reference in case minor service is required.

When service is necessary, bring your hopper

spreader to your distributor. They know your spreader

best and are interested in your complete satisfaction.

NOTE: This spreader is designed to spread snow

and ice control materials only. Do not use it

for purposes other than those speciﬁed in this

manual.

OWNER'S INFORMATION

Owner's Name: ______________________________________________________________________

Date Purchased: _____________________________________________________________________

Outlet Name: ______________________________________________ Phone:_________________

Outlet Address: ______________________________________________________________________

Vehicle Model: _______________________________________________ Year: _______________

Spreader Type (Model):________________________________ Serial #:______________________

Length:________________________ Weight: __________________ lb/kg: _________________

Lit. No. 74256, Rev. 02 6 February 15, 2020

SAFETY DEFINITIONS

NOTE: Indicates a situation or action that can lead

to damage to your spreader and vehicle or other

property. Other useful information can also be

described.

SAFETY

WARNING/CAUTION LABELS

Please become familiar with the warning and caution

labels on the spreader.

NOTE: If labels are missing or cannot be read, see

your sales outlet.

CAUTION

Indicates a potentially hazardous situation

that, if not avoided, may result in minor or

moderate injury. It may also be used to alert

against unsafe practices.

WARNING

Indicates a potentially hazardous situation

that, if not avoided, could result in death or

serious personal injury.

NO STEP

• Slippery Surface When Wet.

• May Cause Severe Injury

D6545

ROTATING PARTS AND FLYING OB-

JECTS CAN CAUSE INJURY OR DEATH

• Keep hands, arms, feet and loose clothing away

• Shut o power ans stop engine before servicing

• Read owners manual before operating.

• Keep bystanders at least 60 ft away.

D6544

ROTATING AUGER CAN CAUSE

SERIOUS INJURY OR DEATH

• Keep arms, hands, and loose clothing

away from auger.

• Shut o control and unplug spreader

before servicing. D6335

Warning Label – No Step

Warning Label – Rear Camera

Warning Label – Rotating Parts Warning Label – Rotating Auger

Lit. No. 74256, Rev. 02 7 February 15, 2020

SAFETY

SERIAL NUMBER LABEL

• Read Owner’s Manual for Installation Instructions.

• Secure spreader to truck with ratchet straps.

• Anchor spreader securely to truck body with bolt kit provided to

prevent slipping or sliding.

• Routinely check straps and handware to make sure they are secure.

D6548

Warning Label – Read Owner's Manual

Warning/Caution Labels, continued

Warning Label – GVWR

Code Deﬁnition

YY 2-Digit Year

MM 2-Digit Month

DD 2-Digit Day

LL 2-Digit Location Code

XXXX 4-Digit Sequential Number

ZZZZZZ 5- to 7-Digit Assembly PN

Lit. No. 74256, Rev. 02 8 February 15, 2020

SAFETY

SAFETY PRECAUTIONS

Improper installation and operation could cause

personal injury and/or equipment and property

damage. Read and understand labels and the

Owner's Manual before installing, operating, or

making adjustments.

WARNING

• Driver to keep bystanders minimum of

25 feet away from operating spreader.

• Before working with the spreader, secure all

loose-ﬁtting clothing and unrestrained hair.

• Before operating the spreader, verify that all

safety guards are in place.

• Before servicing the spreader, wait for

conveyor, auger, and spinner to stop.

• Do not climb into or ride on spreader.

CAUTION

If rear directional, CHMSL light, or brake

stoplights are obstructed by the spreader, the

lights shall be relocated, or auxiliary directional

or brake stoplights shall be installed.

WARNING

Overloading could result in an

accident or damage. Do not exceed

GVWR of UTV. See Loading section

to determine maximum volumes of

spreading material. CAUTION

Disconnect electric and/or hydraulic power

and tag out if required before servicing or

performing maintenance.

NOTE: Lubricate grease ﬁttings after each use.

Use a good quality multipurpose grease.

CAUTION

DO NOT leave unused material in

hopper. Material can freeze or solidify,

causing unit to not work properly.

Empty and clean after each use.

CAUTION

• Do not operate a spreader in need of

maintenance.

• Before operating the spreader, reassemble

any parts or hardware removed for cleaning

or adjusting.

• Before operating the spreader, remove

materials such as cleaning rags, brushes,

and hand tools from the spreader.

• Before operating the spreader, read the

engine owner's manual, if so equipped.

• While operating the spreader, use auxiliary

warning lights, except when prohibited by law.

• Tighten all fasteners according to the

Torque Chart. Refer to Torque Chart for the

recommended torque values.

WARNING

Vehicles <10,000 lb GVWR: Obstructing

the visibility from the vehicle's rear camera

could result in serious injury or damage. An

auxiliary camera system shall be installed

if the vehicle's rear camera is removed or

blocked.

Lit. No. 74256, Rev. 02 9 February 15, 2020

SAFETY

CELL PHONES

A driver's ﬁrst responsibility is the safe operation of

the vehicle. The most important thing you can do

to prevent a crash is to avoid distractions and pay

attention to the road. Wait until it is safe to operate

Mobile Communication Equipment such as cell phones,

text messaging devices, pagers, or two-way radios.

VENTILATION

BATTERY SAFETY

WARNING

Gasoline is highly ﬂammable and gasoline

vapor is explosive. Never smoke while

working on vehicle. Keep all open ﬂames

away from gasoline tank and lines. Wipe up

any spilled gasoline immediately.

CAUTION

Batteries normally produce explosive gases

which can cause personal injury. Therefore,

do not allow ﬂames, sparks, or lit tobacco

to come near the battery. When charging or

working near a battery, always cover your

face and protect your eyes, and also provide

ventilation.

• Batteries contain sulfuric acid, which burns

skin, eyes, and clothing.

• Disconnect the battery before removing or

replacing any electrical components.

WARNING

Vehicle exhaust contains lethal fumes.

Breathing these fumes, even in low

concentrations, can cause death. Never

operate a vehicle in an enclosed area without

venting exhaust to the outside.

FUSES

The electrical system contains several automotive-style

fuses. If a problem should occur and fuse replacement

is necessary, the replacement fuse must be of the

same type and amperage rating as the original.

Installing a fuse with a higher rating can damage the

system and could start a ﬁre.

PERSONAL SAFETY

• Remove the ignition key and put the vehicle in

PARK or in gear to prevent others from starting

the vehicle during installation or service.

• Wear only snug-ﬁtting clothing while working on

your vehicle or spreader.

• Do not wear jewelry or a necktie, and secure

long hair.

• Wear safety goggles to protect your eyes from

battery acid, gasoline, dirt, and dust.

• Avoid touching hot surfaces such as the engine,

radiator, hoses, and exhaust pipes.

• Always have a ﬁre extinguisher rated BC handy,

for ﬂammable liquids and electrical ﬁres.

FIRE AND EXPLOSION

Be careful when using gasoline. Do not use gasoline

to clean parts. Store only in approved containers away

from sources of heat or ﬂame.

Lit. No. 74256, Rev. 02 10 February 15, 2020

SAFETY

TORQUE CHART

CAUTION

Read instructions before assembling. Fasteners

should be ﬁnger tight until instructed to

tighten according to the torque chart. Use

standard methods and practices when

attaching spreader, including proper personal

protective safety equipment.

1/4-20 148 209

1/4-28 164 232

5/16-18 203 287

5/16-24 230 325

3/8-16 365 510

3/8-24 403 569

7/16-14 582 822

7/16-20

9/16-12

9/16-18

5/8-11

5/8-18

3/4-10

3/4-16

7/8-9

7/8-14 643 907

873 12321-8

1-12 954 1349

1/2-13

1/2-20

16.2

18.5

33.3

36.9

59.1

36.5

72.2

126

200

67.0

94.6

105.6

144.3

162.7

11.4

13.1

23.6

26.0

41.8

47.5

67.0

74.8

102.1

115. 2

M6 x 1.00

M12 x 1.75

M8 x 1.25

M14 x 2.00

M10 x 1.50

M27 x 3.00

M22 x 2.50

M30 x 3.50

M24 x 3.00

M20 x 2.5015.0

26.4

52.2

145

10.4

831

1055

1544

2095

610

580

762

1079

1515

M33 x 3.50

M36 x 4.00

2849

3662

1990

2647

441

M16 x 2.00 313

226

M18 x 2.50 431301

Recommended Fastener Torque Chart

Size Size

Torque (N·m)

Grade

Metric Fasteners Class 8.8 and 10.9

These torque values apply to fasteners

except those noted in the instructions.

Torque (N·m)

Grade

Size Size

Torque (N·m)

Class

8.8

Class

10.9

Torque (N·m)

Class

8.8

Class

10.9

Inch Fasteners Grade 5 and Grade 8

Table of contents

Other SnowEx Spreader manuals

SnowEx

SnowEx V-Maxx G2 VX-6010 User manual

SnowEx

SnowEx VX-4210 User manual

SnowEx

SnowEx SP-100-1 User manual

SnowEx

SnowEx VX-3210 User manual

SnowEx

SnowEx Precision Pro SP-1675 User manual

SnowEx

SnowEx SP-65 Owner's manual

SnowEx

SnowEx SP-85 Operating instructions

SnowEx

SnowEx V-Pro 32300 User manual

SnowEx

SnowEx SP-100 Owner's manual

SnowEx

SnowEx V-Maxx G2 User manual

SnowEx

SnowEx 7500 User manual

SnowEx

SnowEx Tailgate Pro 575X User manual

SnowEx

SnowEx HELIXX Series User manual

SnowEx

SnowEx Drop Pro 600 User manual

SnowEx

SnowEx SP-225-1 Operating instructions

SnowEx

SnowEx SP-85 Owner's manual

SnowEx

SnowEx Bulk Pro 1575 User manual

SnowEx

SnowEx Sidewalk-Pro SD-95 User manual

SnowEx

SnowEx SP-9300 User manual

SnowEx

SnowEx HELIXX User manual

SnowEx

SnowEx SP-85 Operating instructions

SnowEx

SnowEx V-Pro 32300 User manual

SnowEx

SnowEx VX-6010 User manual

SnowEx

SnowEx SP-65 Operating instructions

Popular Spreader manuals by other brands

PEQUEA

PEQUEA GT-100 Operator's manual

Herculano

Herculano H2RS9 instruction manual

Epoke

Epoke SKE8 instruction manual

GEA

GEA EL44 Instruction manual and installation instructions

Boss Snowplow

Boss Snowplow TGS 800 owner's manual

Fisher

Fisher EMERSON 168 Series installation guide

Fisher

Fisher POLY-CASTER 78601 owner's manual

TurfEx

TurfEx RS7200 Owner's/operator's manual

Ferris

Ferris Pathfinder Series Operator's manual

Fayat Group

Fayat Group DYNAPAC S100 operation & maintenance

Art's-Way Manufacturing

Art's-Way Manufacturing X700 Operator's manual & parts list

EASTMAN

EASTMAN CR 500 instruction manual

Nogueira

Nogueira RoyalFlow-600 instruction manual

Buyers

Buyers TGS05B installation instructions

Magnum

Magnum V-BOX PV Series Installation and operating instruction manual

Meyer's

Meyer's VB280 INSTRUCTION AND PARTS BOOK

Kramer

Kramer VM-400HDCP user manual

H&S

H&S 5134 Operator's manual