SnowEx SP-85 Operating instructions

Walk-Behind Broadcast Spreader

SP-85 & SP-85SS

Owner's Manual and Installation Instructions

Original Instructions

March 1, 2018

Lit. No. 83678, Rev. 00

CAUTION

Read this document before operating or

servicing the spreader.

This document supersedes all editions with an earlier date.

This document is for SnowEx®SP-85 walk-behind broadcast spreaders beginning with

serial numbers PD-102588 and higher, and SP-85SS walk-behind broadcast spreaders

beginning with PE-100800 and higher.

Lit. No. 83678, Rev. 00 February 1, 2018

Lit. No. 83678, Rev. 00 3 March 1, 2018

TABLE OF CONTENTS

PREFACE.................................................................................................................................................................5

Owner's Information............................................................................................................................................5

SAFETY ...................................................................................................................................................................6

Safety Denitions................................................................................................................................................6

Labels .................................................................................................................................................................6

Safety Precautions..............................................................................................................................................7

Personal Safety...................................................................................................................................................7

Noise...................................................................................................................................................................7

Vibration..............................................................................................................................................................7

LOADING .................................................................................................................................................................8

Loading Your Spreader .......................................................................................................................................8

Material Weights .................................................................................................................................................8

ASS EMBLY ..............................................................................................................................................................9

Assembly Instructions.........................................................................................................................................9

OPERATING THE SPREADER ........................................................................................................................... 11

Using the Spreader........................................................................................................................................... 11

Spreading Tips.................................................................................................................................................. 11

Accessories ...................................................................................................................................................... 11

Poly Deector Kit (PDK-020)...................................................................................................................... 11

MAINTENANCE .................................................................................................................................................... 12

Lubrication ........................................................................................................................................................ 12

Storage & Maintenance .................................................................................................................................... 12

TROUBLESHOOTING.......................................................................................................................................... 13

Model #SP-85 & SP-85SS ............................................................................................................................... 13

Lit. No. 83678, Rev. 00 February 1, 2018

Lit. No. 83678, Rev. 00 5 February 1, 2018

PREFACE

This manual has been prepared to acquaint you with

the safety information, operation, and maintenance

of your new walk-behind spreader. Please read this

manual carefully and follow all recommendations. This

will help ensure protable and trouble-free operation

of your spreader. Keep this manual accessible. It is a

handy reference in case minor service is required.

When service is necessary, bring your walk-behind

spreader to your distributor. They know your spreader

best and are interested in your complete satisfaction.

OWNER'S INFORMATION

Owner's Name: _______________________________________________________________________

Date Purchased: ______________________________________________________________________

Outlet Name: ______________________________________________ Phone: ___________________

Outlet Address: _______________________________________________________________________

Spreader Type (Model):________________________________ Weight: ____________________ lb/kg

Spreader Serial Number:________________________________________________________________

Lit. No. 83678, Rev. 00 6 March 1, 2018

SAFETY

SAFETY DEFINITIONS

NOTE: Indicates a situation or action that can lead

to damage to your spreader and vehicle or other

property. Other useful information can also be

described.

CAUTION

Indicates a potentially hazardous situation

that, if not avoided, may result in minor or

moderate injury. It may also be used to alert

against unsafe practices.

WARNING

Indicates a potentially hazardous situation

that, if not avoided, could result in death or

serious personal injury.

LABELS

Please become familiar with the labels on the

spreader.

NOTE: If labels are missing or cannot be read, see

your sales outlet.

www.snowexproducts.com

Serial Number Label

www.snowexproducts.com

Code Denition

YY 2-Digit Year

MM 2-Digit Month

DD 2-Digit Day

LL 2-Digit Location Code

#### 4-Digit Sequential Number

SP-85 Model Number

SP-85SS Model Number

Lit. No. 83678, Rev. 00 7 March 1, 2018

SAFETY

SAFETY PRECAUTIONS

Improper installation and operation could cause

personal injury and/or equipment and property

damage. Read and understand labels and this

Owner's Manual before installing, operating, or making

adjustments.

WARNING

• Always make sure personnel are clear of

areas of danger when using equipment.

• Before working with the spreader, secure all

loose-tting clothing and unrestrained hair.

• Do not climb into or ride on spreader.

• Never attempt to lift a unit with material in it.

• Always inspect unit for defects and

replace any broken, missing, or worn parts

immediately.

• Always check areas to be spread to be sure

no hazardous conditions or substances are

in the area.

CAUTION

• Do not operate a spreader in need of

maintenance.

• Before operating the spreader, reassemble

any parts or hardware removed for cleaning

or adjusting.

• Before operating the spreader, remove

materials such as cleaning rags, brushes,

and hand tools from the spreader.

• Never use wet materials or materials with

foreign debris with this spreader. This

unit is designed to handle dry, clean,

free-owing material.

CAUTION

DO NOT leave unused material in

hopper. Material can freeze or solidify,

causing unit to not work properly.

Empty and clean after each use.

NOTE: Lubricate grease ttings after each use.

Use a good quality multipurpose grease.

PERSONAL SAFETY

• Wear only snug-tting clothing while working on

your spreader.

• Do not wear jewelry or a necktie, and secure long

hair.

• Wear safety goggles to protect your eyes from dirt

and dust.

NOISE

Airborne noise emission during use is below 70 dB(A)

for the spreader operator.

VIBR ATION

Operating spreader vibration does not exceed 2.5 m/s2

to the hand-arm or 0.5 m/s2to the whole body.

Lit. No. 83678, Rev. 00 8 March 1, 2018

LOADING YOUR SPREADER

Capacity: 2 ft3hopper

WARNING

Never remove spreader from vehicle with

material in it as this could cause damage to

the frame assembly.

WARNING

Do not overload spreader. Use chart below

to calculate weight of material. Weights of

material are an average for dry materials.

CAUTION

DO NOT leave unused material in

hopper. Material can freeze or solidify,

causing unit to not work properly.

Empty and clean after each use.

CAUTION

Read and adhere to manufacturer's

ice-control material package

labeling including Material Safety

Data Sheet requirements.

WARNING

Never leave materials in hopper for long

periods of time; salt is hygroscopic, will

attract atmospheric moisture and harden up.

MATERIAL WEIGHTS

Density

Material (lb/ft3)(lb/yd3)(kg/m3)

Salt 80 2160 1282

Sand 100 2700 1602

Material densities are approximate and are based on

dry, loose material. It is the responsibility of the operator

to know the weight of the material to be spread and the

vehicle/spreader carrying capacity.

Lit. No. 83678, Rev. 00 9 March 1, 2018

4. With the gate lever in the down position, slide the

handle assembly onto the spreader frame.

5. Secure with the 1/4" x 1-3/8" cap screws and 1/4"

locknuts from the hardware kit.

ASSEMBLY INSTRUCTIONS

1. Tires are not fully inated when shipped. Inate

tires using a manual pump.

2. Slide the actuator rod down through the slot in the

spreader support leg at the rear of the spreader.

3. Attach the actuator rod to the handle assembly.

ASSEMBLY

Actuator

Rod

Support

Leg

Handle

Assembly

Spreader

Frame

Gate lever in

down

position.

Handle

Assembly

1/4" x 1-3/8"

Cap Screw

1/4" Locknut

Spreader

Frame

WARNING

Use safety glasses and gloves when inating

and installing the tires. Use manual pump

only to inate. Refer to the tire sidewall for

manufacturer's recommended pressure. Do

not exceed the maximum ination pressure.

Handle

Assembly

Actuator

Rod

Lit. No. 83678, Rev. 00 10 March 1, 2018

8. Place the weather cover on the hopper.

9. After assembly is complete, tighten all hardware.

6. Attach the actuator rod to the gate linkage. Secure

with the hairpin clip.

7. Install the deectors using the supplied

5/16" x 3/4" cap screws, 5/16" at washers, and

5/16" locknuts. Verify the deectors sit on top of

the deector support brackets.

NOTE: Install the notched deector to the front of

the spreader, beneath the lift handle.

ASSEMBLY

Deflector

5/16" x 3/4"

Cap Screw

Lock Ring

5/16"

Locknut

5/16" Flat

Washer

Deflectors

Weather Cover

Hairpin

Clip

tuator

dGate

Linkage

Other manuals for SP-85

This manual suits for next models

Table of contents

Other SnowEx Spreader manuals

SnowEx

SnowEx VX-3210 User manual

SnowEx

SnowEx SP-225-1 Operating instructions

SnowEx

SnowEx SP-85 Owner's manual

SnowEx

SnowEx SP-1675 User manual

SnowEx

SnowEx Bulk-Pro 1875 User manual

SnowEx

SnowEx 7500 User manual

SnowEx

SnowEx Bulk Pro 1575 User manual

SnowEx

SnowEx HELIXX User manual

SnowEx

SnowEx Drop Pro 600 User manual

SnowEx

SnowEx SP-85 Operating instructions

SnowEx

SnowEx Bulk Pro SP-1575 Operating instructions

SnowEx

SnowEx SP-3000 User manual

SnowEx

SnowEx Tailgate Pro 575X User manual

SnowEx

SnowEx Sidewalk-Pro SD-95 User manual

SnowEx

SnowEx V-Pro 32300 User manual

SnowEx

SnowEx SP-9500X User manual

SnowEx

SnowEx VX-4210 User manual

SnowEx

SnowEx Renegade S150A User manual

SnowEx

SnowEx SP-100 Owner's manual

SnowEx

SnowEx SP-2400 Owner's manual

SnowEx

SnowEx V-Pro 32200 User manual

SnowEx

SnowEx V-Maxx G2 VX-6010 User manual

SnowEx

SnowEx Vee Pro 3000 User manual

SnowEx

SnowEx Super Maxx SP-9300XH Operating instructions

Popular Spreader manuals by other brands

PEQUEA

PEQUEA GT-100 Operator's manual

Herculano

Herculano H2RS9 instruction manual

Epoke

Epoke SKE8 instruction manual

GEA

GEA EL44 Instruction manual and installation instructions

Boss Snowplow

Boss Snowplow TGS 800 owner's manual

Fisher

Fisher EMERSON 168 Series installation guide

Fisher

Fisher POLY-CASTER 78601 owner's manual

TurfEx

TurfEx RS7200 Owner's/operator's manual

Ferris

Ferris Pathfinder Series Operator's manual

Fayat Group

Fayat Group DYNAPAC S100 operation & maintenance

Art's-Way Manufacturing

Art's-Way Manufacturing X700 Operator's manual & parts list

EASTMAN

EASTMAN CR 500 instruction manual

Nogueira

Nogueira RoyalFlow-600 instruction manual

Buyers

Buyers TGS05B installation instructions

Magnum

Magnum V-BOX PV Series Installation and operating instruction manual

Meyer's

Meyer's VB280 INSTRUCTION AND PARTS BOOK

Kramer

Kramer VM-400HDCP user manual

H&S

H&S 5134 Operator's manual