SnowEx Sidewalk-Pro SD-95 Operating instructions

Walk-Behind Drop Spreader

SD-95 & SD-95SS

Owner's Manual and Installation Instructions

Original Instructions

February 1, 2019

Lit. No. 76748, Rev. 01

CAUTION

Read this document before operating or

servicing the spreader.

This document supersedes all editions with an earlier date.

This document is for SnowEx®SD-95 walk-behind drop spreaders with

serial numbers beginning with PF-101257 and higher, or

serial numbers beginning with PG-101265 and higher.

Lit. No. 76748, Rev. 01 2 February 1, 2019

TABLE OF CONTENTS

PREFACE..................................................................................................................................................................3

Owner's Information Form ..................................................................................................................................3

SAFETY ....................................................................................................................................................................4

LOADING ..................................................................................................................................................................5

ASSEMBLY...............................................................................................................................................................7

Lit. No. 76748, Rev. 01 3 February 1, 2019

PREFACE

This manual has been prepared to acquaint you with

the safety information, operation, and maintenance

of your new walk-behind spreader. Please read this

manual carefully and follow all recommendations. This

will help ensure proﬁtable and trouble-free operation

of your spreader. Keep this manual accessible. It is a

handy reference in case minor service is required.

When service is necessary, bring your walk-behind

spreader to your distributor. They know your spreader

best and are interested in your complete satisfaction.

OWNER'S INFORMATION

Owner's Name: _______________________________________________________________________

Date Purchased: ______________________________________________________________________

Outlet Name: ______________________________________________ Phone: ___________________

Outlet Address: _______________________________________________________________________

Spreader Type (Model):________________________________ Weight: ____________________ lb/kg

Spreader Serial Number:________________________________________________________________

Lit. No. 76748, Rev. 01 4 February 1, 2019

SAFETY

SAFETY DEFINITIONS

NOTE: Indicates a situation or action that can lead

to damage to your spreader and vehicle or other

property. Other useful information can also be

described.

CAUTION

Indicates a potentially hazardous situation

that, if not avoided, may result in minor or

moderate injury. It may also be used to alert

against unsafe practices.

WARNING

Indicates a potentially hazardous situation

that, if not avoided, could result in death or

serious personal injury.

LABELS

Please become familiar with the labels on the

spreader.

NOTE: If labels are missing or cannot be read, see

your sales outlet.

Code Deﬁnition

YY 2-Digit Year

MM 2-Digit Month

DD 2-Digit Day

LL 2-Digit Location Code

#### 4-Digit Sequential Number

SD-95 Model Number

SD-95SS Model Number

YYMMDDLL####SD-95

YYMMDDLL####SD-95SS

Lit. No. 76748, Rev. 01 5 February 1, 2019

SAFETY

SAFETY PRECAUTIONS

Improper installation and operation could cause

personal injury and/or equipment and property

damage. Read and understand labels and this

Owner's Manual before assembling, operating, or

making adjustments.

WARNING

• Always make sure personnel are clear of

areas of danger when using equipment.

• Before working with the spreader, secure all

loose-ﬁtting clothing and unrestrained hair.

• Do not climb into or ride on spreader.

• Never attempt to lift a unit with material in it.

• Always inspect unit for defects and

replace any broken, missing, or worn parts

immediately.

• Always check areas to be spread to be sure

no hazardous conditions or substances are

in the area.

CAUTION

• Do not operate a spreader in need of

maintenance.

• Before operating the spreader, reassemble

any parts or hardware removed for cleaning

or adjusting.

• Before operating the spreader, remove

materials such as cleaning rags, brushes,

and hand tools from the spreader.

• Never use wet materials or materials with

foreign debris with this spreader. This

unit is designed to handle dry, clean,

free-ﬂowing material.

CAUTION

DO NOT leave unused material in

hopper. Material can freeze or solidify,

causing unit to not work properly.

Empty and clean after each use.

NOTE: Lubricate grease ﬁttings after each use.

Use a good quality multipurpose grease.

PERSONAL SAFETY

• Wear only snug-ﬁtting clothing while working on

your spreader.

• Do not wear jewelry or a necktie, and secure long

hair.

• Wear safety goggles to protect your eyes from dirt

and dust.

NOISE

Airborne noise emission during use is below 70 dB(A)

for the spreader operator.

VIBRATION

Operating spreader vibration does not exceed 2.5 m/s2

to the hand-arm or 0.5 m/s2to the whole body.

Lit. No. 76748, Rev. 01 6 February 1, 2019

LOADING YOUR SPREADER

Material Weights

Material Density

(lb/ft3)

Rock Salt 80–90

SPREADING TIPS

• Use care when operating spreader near

pedestrians.

• Spread ice melting materials "with the storm" to

prevent unmanageable levels of ice from building.

• Adjust material ﬂow by rotating the cam wheel to

either increase or decrease gate slide movement,

see below.

WARNING

Never remove spreader from vehicle with

material in it as this could cause damage to

the frame assembly.

WARNING

Do not overload spreader. Use chart below

to calculate weight of material. Weights of

material are an average for dry materials. CAUTION

DO NOT leave unused material in

hopper. Material can freeze or solidify,

causing unit to not work properly.

Empty and clean after each use.

CAUTION

Read and adhere to manufacturer's

ice-control material package

labeling including Safety Data

Sheet requirements.

Calibration

Cam

3/8" Internal

Tooth

Lock Washe

T-Handle

Knob

Lit. No. 76748, Rev. 01 7 February 1, 2019

ASSEMBLY INSTRUCTIONS

1. The spreader is shipped with tires partially

inﬂated. Using a manual pump, fully inﬂate the

tires to the psi setting shown on the tire sidewall.

2. Insert the end of the actuator rod into the

slide gate. Lock in place with hairpin clip and

5/16" washer as shown below.

ASSEMBLY

WARNING

Use safety glasses and gloves when inﬂating

and installing the tires. Use manual pump

only to inﬂate. Refer to the tire sidewall for

manufacturer's recommended pressure. Do

not exceed the maximum inﬂation pressure.

Actuator Rod

Slide

Gate

5/16"

Washer

Hairpin

Clip

3. Assemble the upper handle assembly to the main

frame. Simultaneously insert actuator rod into the

upper handle.

4. Attach clear protective cover to hopper.

Actuator

Rod

Handle

Assembly

Main Frame

1/4" x 1-3/8"

Cap Screw

1/4"

Locknut

Actuator

Rod

Operator

Lever

Handle

Grip

any printed, mechanical, electronic, ﬁlm, or other distribution and storage media, without the written consent of TrynEx International, LLC.

Authorization to photocopy items for internal or personal use by TrynEx International outlets or spreader owner is granted.

TrynEx International reserves the right under its product improvement policy to change construction or design details and furnish equipment

when so altered without reference to illustrations or speciﬁcations used. TrynEx International may require or recommend optional equipment

for spreaders. TrynEx International offers a limited warranty for all spreaders and accessories. See separately printed page for this important

information. The following are registered (®) trademarks of Douglas Dynamics, LLC: SnowEx®.

Printed in U.S.A.

A DIVISION OF DOUGLAS DYNAMICS, LLC

Tr ynE x Inter natio nal

531 Ajax Drive

Madison Heights, MI 48071-2429

www.snowexproducts.com

Lit. No. 76748, Rev. 01 February 1, 2019

This product conforms to EU Machinery Directive 2006/42/EC.

Other manuals for Sidewalk-Pro SD-95

This manual suits for next models

Table of contents

Other SnowEx Spreader manuals

SnowEx

SnowEx Drop Pro 600 User manual

SnowEx

SnowEx 7500 User manual

SnowEx

SnowEx SP-325 Operating instructions

SnowEx

SnowEx VX-1500 User manual

SnowEx

SnowEx SP-100 Owner's manual

SnowEx

SnowEx V-Pro 32200 User manual

SnowEx

SnowEx Bulk-Pro 1875 User manual

SnowEx

SnowEx SP-7550 Owner's manual

SnowEx

SnowEx V-Maxx G2 User manual

SnowEx

SnowEx VX-6010 User manual

SnowEx

SnowEx SP-100-1 User manual

SnowEx

SnowEx K1-131116 Owner's manual

SnowEx

SnowEx Bulk Pro SP-1575 Operating instructions

SnowEx

SnowEx HELIXX User manual

SnowEx

SnowEx SP-1675 User manual

SnowEx

SnowEx Vee Pro 3000 User manual

SnowEx

SnowEx SP-65 Operating instructions

SnowEx

SnowEx Sidewalk-Pro SD-95 User manual

SnowEx

SnowEx SP-575V Owner's manual

SnowEx

SnowEx VX-4200 User manual

SnowEx

SnowEx SP-9500X User manual

SnowEx

SnowEx SP-85 Operating instructions

SnowEx

SnowEx HELIXX Series User manual

SnowEx

SnowEx V-Maxx G2 VX-6010 User manual

Popular Spreader manuals by other brands

PEQUEA

PEQUEA GT-100 Operator's manual

Herculano

Herculano H2RS9 instruction manual

Epoke

Epoke SKE8 instruction manual

GEA

GEA EL44 Instruction manual and installation instructions

Boss Snowplow

Boss Snowplow TGS 800 owner's manual

Fisher

Fisher EMERSON 168 Series installation guide

Fisher

Fisher POLY-CASTER 78601 owner's manual

TurfEx

TurfEx RS7200 Owner's/operator's manual

Ferris

Ferris Pathfinder Series Operator's manual

Fayat Group

Fayat Group DYNAPAC S100 operation & maintenance

Art's-Way Manufacturing

Art's-Way Manufacturing X700 Operator's manual & parts list

EASTMAN

EASTMAN CR 500 instruction manual

Nogueira

Nogueira RoyalFlow-600 instruction manual

Buyers

Buyers TGS05B installation instructions

Magnum

Magnum V-BOX PV Series Installation and operating instruction manual

Meyer's

Meyer's VB280 INSTRUCTION AND PARTS BOOK

Kramer

Kramer VM-400HDCP user manual

H&S

H&S 5134 Operator's manual