SMITH SYSTEM 58021 User manual
Assembly Instructions
MOTUM TEACHERS DESK
SPLIT HEIGHT LEFT HAND
If you have damaged or missing components,
please contact customer service at 1-800-328-1061
MODEL NUMBERS
58021 AND 58023
REVISED: 2/2022
Document #: 179719
Hardware and Components
BOX A (60149)
(60152)
For 72” Model Only (58022)
(60151)
ITEM NO. DESCRIPTION QTY
A-1 TEACHER DESK U TUBE LEG ASSEMBLY 1
A-2 SWIVEL GLIDE W/ GLIDE STOP 2
A-3 TEACHER DESK STRAIGHT TUBE LEG ASSEMBLY 1
A-4 TD BRACED L BRACKET 1
A-5 TD STRAIGHT TUBE LEG Z BRACKET 1
ITEM NO. DESCRIPTION QTY
1 Vibration-Resistant Catch 1
2 Vibration-Resistant Strike Plate 1
3 NO.8x3/4" PHILLIPS/SLOTTED WOOD SCREW 2
4 NO. 4 X 1/2" PHILLIPS/SLOTTED WOOD SCREW 2
ITEM NO. DESCRIPTION QTY
5 TD SUPPORT BRACE 1
6 TD SUPPORT BRACE HARDWARE PACK 1
ITEM NO. DESCRIPTION QTY
A-8 TD U TUBE LEG Z BRACKET 1
A-9 TD L BRACKET FRONT 120 1
A-10 TD FILLER BRACKET 2
A-11 TD L BRACKET FRONT MAIN 1
A-12 TD FRONT MAIN TO 120 SPACER 1
REVISED: 2/2022
Document #: 179719
BOX B (60150)
ITEM NO. DESCRIPTION QTY
B-1 TD SPLIT HEIGHT BASE ASSEMBLY 1
B-2 TD DOOR HINGE ASSEMBLY 1
B-3 SPLIT HEIGHT COSMETIC COVER SIDE 1
B-4 SPLIT HEIGHT SPACER 1
B-5 MWS TD LOCK ASSEMBLY 1
B-6 SPLIT HEIGHT COSMETIC COVER FRONT 1
ITEM NO. DESCRIPTION QTY
B-7 TD SPLIT HEIGHT ANGLED PANEL 1
B-8 TD BOLT ON L BRACKET 5
B-9 MWS TD WELD ON L BRACKET 1
B-10 BUTTERFLY PLATE WITH HARWARE PACK 1
B-11 TD SPLIT HEIGHT HARDWARE PACK 1
B-12 MWS TOD TILT SUPPORT ASSEMBLY 1
ITEM NO. DESCRIPTION QTY
7 2" Caster No Lock w/ 7/16" Friction Stem 2
8 2" Caster w/Lock 7/16" Friction Stem 2
ITEM NO. DESCRIPTION QTY
9 TD SPLIT LAMINATE COVER LH SIDE 1
10 TD SPLIT LAMINATE COVER LH FRONT 1
11 SIT-STAND DESK FLIP TOP COLUMN 1
REVISED: 2/2022
Document #: 179719
Hardware and Components
BOX A ITEM #A-13 (60139) –
TEACHERS DESK HARDWARE
PACK COMPONENTS
BOX B ITEM #B-11 (60140) –
TD SPLIT HEIGHT HARDWARE
PACK COMPONENTS
ITEM NO. DESCRIPTION QTY
13-1 NO. 10 X 5/8" TORX BUTTON HEAD SCREW 70
13-2 NO. 10 X 1/2" TORX SELF DRILLING BUTTON HEAD SCREW 2
13-3 10-32 X 1/2" TORX BUTTON HEAD W/PATCH 8
13-4 T25 TORX POWER BIT #2 1
ITEM NO. DESCRIPTION QTY
11-1 NO. 10 X 5/8" TORX BUTTON HEAD SCREW 44
11-2 NO. 10 X 1/2" TORX SELF DRILLING BUTTON HEAD SCREW 1
11-3 10-32 X 1/2" TORX BUTTON HEAD SCREW W/PATCH 7
11-4 M6 X 1.0 X 20MM SOCKET HEAD, HEX DRIVE, BLK OX 3
11-5 M6 X 1.0 X 10MM SOCKET HEAD, HEX DRIVE, BLK OX 4
11-6 1/4" I.D. PLASTIC LOOP CLAMP 2
11-7 HEX KEY 5MM SHORT ARM 1
11-8 T25 TORX POWER BIT 2" 1
11-9 10-32 X 1" TORX BUTTON HEAD W/PATCH 4
11-10 #10 WASHER 1" od 8
11-11 M6 SPLIT LOCK WASHER 4
REVISED: 2/2022
Document #: 179719
Hardware and Components
FOR 60” MODEL ONLY
58021
FOR 72” MODEL ONLY
58023
A TD STRAIGHT LEG SIDE PANEL 1
B TD U LEG SIDE PANEL 1
C TD MAIN FRONT PANEL LH 1
D TD 120 FRONT PANEL LH 1
J TD SPLIT 24X36" TOP LH 1
K TD SPLIT 24X24" TOP 1
M TD SPLIT SIDE PANEL LH 1
L TD SPLIT DOOR LH 1
O TD SPLIT SHELF LH 1
N TD SPLIT MIDDLE PANEL LH 1
T TD SPLIT 24X45" TOP LH 1
REVISED: 2/2022
Document #: 179719
Hardware and Components
REVISED: 2/2022
Document #: 179719
General Assembly Guidelines
Special Notes:
•Ensure that all components are accounted for and undamaged
before assembling
•Follow each step carefully to ensure the proper assembly of this
product
•2-person assembly is highly recommended
•Clean the product with a mild cleaner and damp cloth
Tools:
•Framing Square
•Drill
•#1 and #2 Phillips bit
•Screwdriver (optional)
•Wood Clamps (optional)
•¼” bit extender (optional)
1. Place wood top on clean smooth surface upside down with the pilot holes facing up,
fasten 2x item #A-7 to item A using 4x fasteners item #13-1 using the supplied T25
Torx bit item #13-4.
2. Slide the previously assembled panel A onto item #A-3, item #A-7 should side over
the metal lip of item #A-3 as shown. Do not install any fasteners at this point this
board will be removed later. It is helpful to clamp panel A to item #A-3.
REVISED: 2/2022
Document #: 179719
Assembly Instructions
3. Using previously assembled components install item #A-4 and #A-5 using 4x fastener
#13-3, do not fully tighten, install item #B-2 using 3x fastener #13-1 note to
orientation of #B-2, do not fully tighten.
4. Position Panel B as shown, centering the panel to create equal gaps, a spacer or credit
card works well. Fasten panel B to item #A-1 using 7x fasteners item #13-1 using the
supplied T25 Torx bit item # 13-4. NOTE: The panel should sit on the metal finger as
shown in detail.
Optional: Use 1x
fastener #13-1 to
hold #A-3 in place.
This fastener will be
removed on step 10
REVISED: 2/2022
Document #: 179719
Assembly Instructions
5. Fasten 4x item #B-8 and 1x item #B-9 to panel M using 10x fasteners item #11-1 using
the supplied T25 Torx bit item #13-4.
6. Position Panel N as shown over the top of item #B-12. Fasten panel N to item #B-12
using 4x fasteners item #11-3 and #11-10, finger tighten only. Fasten item #1 using 2x
fastener #4 as shown.
REVISED: 2/2022
Document #: 179719
Assembly Instructions
7. Using 2x item #A-10 as spacers. Place panel D as shown. Confirm edges of panels D and
A align as shown. Fasten panel D with the 2x indicated fastener #13-1. Confirm edges of
panels D and A are still aligned before installing the remaining 6x #13-1 fasteners
REVISED: 2/2022
Document #: 179719
8. Place the previously assembled panel N as shown, ensure panel N is below the 4 mounting
tabs before sliding panel M into place. This is the most critical step, ensure all 3 edges of
panel N are touching the corresponding edges as shown below. Fasten panel N and M
using 8x fastener #11-1
These edges
should touch
Assembly Instructions
This manual suits for next models
1
Table of contents
Other SMITH SYSTEM Indoor Furnishing manuals
SMITH SYSTEM
SMITH SYSTEM 11160 User manual
SMITH SYSTEM
SMITH SYSTEM Flavors P-Tablet User manual
SMITH SYSTEM
SMITH SYSTEM UXL Nest and Fold Table User manual
SMITH SYSTEM
SMITH SYSTEM Elemental 01475 User manual
SMITH SYSTEM
SMITH SYSTEM Silhouette 01600 User manual
SMITH SYSTEM
SMITH SYSTEM 26672 User manual
SMITH SYSTEM
SMITH SYSTEM 01362 User manual
SMITH SYSTEM
SMITH SYSTEM 58000 User manual
SMITH SYSTEM
SMITH SYSTEM UXL 18” Stack Chair with Arm User manual
SMITH SYSTEM
SMITH SYSTEM NUMBERS 02130 User manual
SMITH SYSTEM
SMITH SYSTEM 58020 User manual
SMITH SYSTEM
SMITH SYSTEM Access Corner Station User manual
SMITH SYSTEM
SMITH SYSTEM Flowform Flex Screen User manual
SMITH SYSTEM
SMITH SYSTEM 04157 User manual
SMITH SYSTEM
SMITH SYSTEM UXL P-Tablet Chair XL183P P NT Series User manual
SMITH SYSTEM
SMITH SYSTEM Flowform User manual
SMITH SYSTEM
SMITH SYSTEM 03002 User manual
SMITH SYSTEM
SMITH SYSTEM 25218f User manual
SMITH SYSTEM
SMITH SYSTEM Acrobat Desk User manual
SMITH SYSTEM
SMITH SYSTEM Circulation Desk User manual
