Smeg A3 Manual

Thank you for ordering your new Smeg cooker from John Lewis. In doing so you have qualied for

a free of charge delivery and connection service, including disconnection and disposal of your old

cooker.

Smeg will provide a ‘hook up’ service to connect your new cooker to both the natural gas and/

or electrical supply (please note Smeg will not undertake disconnection or connection to LPG). This

connection service is provided on the understanding that existing fuel supplies have been prepared

to a required standard and fall within the parameters laid out in following information.

Once your order has been processed Smeg logistics will get in touch with you to arrange a home

delivery booking. When a date is agreed they will also give you a follow up call the day before

delivery to update you with a 4hr window. You can also choose to have a call one hour prior to

delivery on the actual day, should you wish.

To ensure everything runs smoothly, when making the booking Smeg will carry out a home delivery

questionnaire to ascertain all information relating to both access at your property & the electrical /

gas supply.

DISCONNECTION: Please note our team can only disconnect gas from a standard bayonet tting.

Please ensure any cooker for removal is cooled down prior to team arriving.

GAS CONNECTION: Your cooker will be supplied with a one metre long mark 2 BS bayonet hose

with a 1/2” BSP male tting. Which will be used to connect your cooker to the gas supply.

ELECTRICAL CONNECTION: Please visit www.smeguk.com for information on the electrical loading

requirement for your appliance. Your cooker will be supplied with the appropriate cable to connect

to the electrical supply.

IMPORTANT

Please note this is a delivery, disconnection, disposal and connection service only. The Smeg

engineer will only connect the gas and electric supply. All pipe and cable supply work must be in

place prior to connection, any remedial work required will not be undertaken and the engineer will

not be able to complete connection. Please ensure you refer to the attached connection guide specic

to your model.

SMEG COOKERS

DELIVERY AND CONNECTION PROCEDURE

The gas bayonet tting must terminate to the left hand side of the cooker when viewed from the rear and must be within 100mm from the

edge of left hand side, it must not be directly behind the appliance. The bayonet tting must be no higher than 700mm and no lower than

600mm from the oor.

The gas bayonet tting must terminate to the right hand side of the cooker when viewed from the rear and must be within 100mm from the

edge of right hand side, it must not be directly behind the appliance. The bayonet tting must be no higher than 700mm and no lower than

600mm from the oor.

The gas bayonet tting must terminate to the right hand side of the cooker when viewed from the rear and must be within 100mm from the

edge of right hand side, it must not be directly behind the appliance. The bayonet tting must be no higher than 700mm and no lower than

600mm from the oor.

Gas

supply

point

Electrical

connection

point

MODELS: SUK91 / SUK92 / A1/ A2 / A3 / A4 / A5 / CPF9GP / CPF9IP

MODELS: TR4110 / TR93 / TR90* / SYD4110 / SY93

MODELS: TR103 / TR103I

HOT ZONE

A 15mm BSP

socket elbow

(bayonet tting)

A 15mm BSP

socket elbow

(bayonet tting)

Gas

supply

point

Gas

supply

point

Gas

supply

point

100mm

600mm to 700mm600mm to 700mm

Electrical

connection

point

Electrical

connection

point

The hot zone is the area directly above your cooker or hob. Before installation please ensure

that this area is free from ammable items including wood, wallpaper, plug sockets, wiring or

an overhanging boiler. Unfortunately, if we arrive and the hot zone isn’t clear, we may not be

able to complete your connection.

VIEW FROM REAR

Gas

supply

point

Electrical

connection

point

A 15mm BSP

socket elbow

(bayonet tting)

Gas

supply

point

100mm

600mm to 700mm

Electrical

connection

point

VIEW FROM REAR

Electrical

connection

point

*The appliance must be secured to the wall using the brackets or chain provided

Other manuals for A3

This manual suits for next models

Table of contents

Popular Cooker manuals by other brands

Modena

Modena FC 7645 SGM User manual book

Electrolux

Electrolux Insight EKG6049 user manual

Stanley

Stanley Donard 60 Installation and operating instructions

Bartscher

Bartscher 201TC manual

Parkinson Cowan

Parkinson Cowan 50 GR/BU installation instructions

Siemens

Siemens HK9P00020U instruction manual

Creda

Creda S150E Installation and user instructions

Creda

Creda HB48309 instructions

Bosch

Bosch HCE743220F instruction manual

Tricity Bendix

Tricity Bendix SE545P manual

NEFF

NEFF E1461A2/01 Instructions for use

Zanussi

Zanussi ZCM 700 X Instruction booklet

RiverGrille

RiverGrille TF2002501-RG Assembly instruction

Vollrath

Vollrath 69504F Operator's manual

Tricity Bendix

Tricity Bendix CSIE500 Operating and installation instructions

AEG

AEG Competence 5731 V Instruction book

Euromaid

Euromaid ES60 Installation and operation manual

Hotpoint

Hotpoint HUI 62 TP Instructions for installation and use