SMC Networks HP1D-USB User manual

Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable.

However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or

other rights of third parties which may result from its use. No license is granted by implication or

otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications

at any time without notice.

SMC Networks, Inc.

38 Tesla

Irvine, CA 92618

Trademarks:

SMC is a registered trademark; and EZ Connect is a trademark of SMC Networks, Inc. Other product

and company names are trademarks or registered trademarks of their respective holders.

TABLE OF CONTENTS

CHAPTER 1 | Introduction

Features and Benefits

Package Contents

Minimum Requirements

CHAPTER 2 | Getting to Know the Powerline Adapter

LED Indicators

Resetting the Powerline Adapter

CHAPTER 3 | Getting Connected

Basic Installation Procedure

Installing the USB Drivers

CHAPTER 4 | Installing EZ Configuration Utility

Windows 98SE/Me/2000/XP

Macintosh Computer

CHAPTER 5 | Using the EZ Configuration Utility

Launch the Utility

Utility Layout

CHAPTER 6 | Understanding the Information in the SMC EZ Configuration Utility

Device List

Rename Devices

Delete Devices

CHAPTER 7 | Add a Powerline Device

CHAPTER 8 | Setting a Network Password

CHAPTER 9 | Running the Diagnostic Wizard

CHAPTER 10 | Understand the Diagnostic Report

APPENDIX A | Technical Specifications

APPENDIX B | Compliances

APPENDIX C | Technical Support

CHAPTER 1 | Introduction

Congratulations on your purchase of an EZ Connect™ Powerline to USB Desktop Adapter (SMCHP1D-

USB). SMC is proud to provide you with a powerful yet simple communication device for creating a

Powerline network that to extend the range of your wired or wireless network.

Features and Benefits

•EZ Configuration Utility – Works on both Windows and Mac based PCs

•Plug and Play installation – works out of the box

•Extends the range of your wired or wireless network

•Save time and money by using existing home wiring – no need to run expensive CAT-5

cabling

•Ideal solution for connecting your Game Console system to the Internet to play online

games

Package Contents

Before installing the EZ Connect™ Powerline to USB Desktop Adapter, verify that you have the

items listed under “Package Contents.” Also be sure that you have the necessary cabling. If any of

the items are missing or damaged, contact your local SMC distributor.

•EZ Connect™ Powerline to USB Desktop Adapter

•Powerline Cord

•One USB cable

•CD with User Guide and EZ Configuration Utility

•Quick Installation Guide

If possible, retain the carton and original packing materials in case there is a need to return the

product.

Minimum Requirements

•A Windows 98SE/Me/2000/XP PC with USB port

•CD-ROM*

Note: A CD-ROM drive is only required if you want to install the EZ Configuration Utility from EZ

Install CD. This utility can also be downloaded from www.smc.com

CHAPTER 2 | Getting to Know the Powerline Adapter

The SMCHP1D-ETH EZ Connect Powerline to USB Desktop Adapter is the perfect solution for the

home/office environment. This Powerline Adapter offers:

•1 – USB 1.1 Connection (LAN)

•1 – Powerline Connecter

•LEDs for network status and troubleshooting

Note: You will need at least two SMC Powerline devices to create a Powerline network.

LED Indicators

The Barricade includes LED indicators on the front panel that simplify installation and network

troubleshooting.

LED Label Color Activity

Power PWR* Green Solid LED indicates that the unit is powered on

No LED light indicates the unit is powered off

HomePlug HP Green Solid LED indicates that a Powerline signal is detected

Blinking LED indicates traffic is being transmitted

No LED light indicates no Powerline signal is not detected

The USB Powerline Adapter receives power from the USB port on your PC – so the PWR LED will

come on when you connect this Adapter to the USB port – not when you connect it to the power

outlet in the wall. The power cord that is connected to the power outlet is simply to link that PC

to the Powerline network.

Resetting the Powerline Adapter

To reset the SMC EZ Connect Powerline Adapter you will need to use the EZ Configuration Utility to

reset the password to the default setting of [HomePlug].

CHAPTER 3 | Getting Connected

The EZ Connect Powerline to USB Adapter is connected between the USB port on your Windows-

based PC and the Powerline Network. The Powerline network is automatically created once you

plug in the first Powerline Device.

Basic Installation Procedure

1. CONNECT the LAN

Connect an USB cable from your PC to the Powerline to USB Adapters USB 1.1 port on the back

on the device.

2. CONNECT the Powerline

Run the included Power cord from the Powerline connector on the Adapter to an available

power outlet in your home.

Note: For best performance, connect device directly to wall outlet. Do not connect to surge

protector power bar.

Power cord

connected to

Powerline Port

COMPUTER

connected to

USB Port

Installing USB Driver

To install the USB drivers for the SMC EZ Connect Powerline to USB Adapter follow the steps

outlined below.

1. Put the EZ Install CD into your CD-ROM drive. The wizard will auto-run.

2. Click on the [Install USB Drivers] option

3. When the USB drivers are installed, you will be prompted to connect your SMCHP1D-USB

adapter to your PC and then reboot your PC.

Click [OK] and then close all your open applications and manually reboot your PC.

4. When you computer boots back up, the New Hardware wizard should launch and guide you

through the installation of the USB Adapter. During the Driver Installation if you are

prompted with following window:

Click the [Continue Anyway] button to complete the installation.

Note: If the wizard is unable to locate the USB drivers you can manually install the drivers by

browsing to the Drivers folder on the CD-ROM.

When you have finished installing the USB to Powerline Adapter, if this is the PC you are going to

manage your Powerline network from, then install the EZ Configuration Utility – steps are outlined

below.

CHAPTER 4 | Installing EZ Configuration Utility

Windows 98SE/Me/2000/XP

The screen shots were taken on a Windows 2000 machines, but the same steps apply will apply for

Windows 98SE, Me, and XP.

To access the User Guide and install the EZ Configuration Utility just insert the CD into your CD-

ROM drive and the Auto-run splash screen will appear:

Note: If the CD does not Auto-Run you can click on your CD-ROM drive and double mouse-click on

the [SMCHP1D-USB.exe] icon to launch this splash screen.

The USB Drivers are not compatible with the Mac OS. However, if you want to manage your

Powerline Adapter from a Mac you can use the SMC EZ Configuration Utility. The EZ Configuration

Utility for those operating systems are located on the CD-ROM in there respective folders:

OSX and OS9.

To install the utility, follow the steps below:

1. Click on the [Install EZ Configuration Utility] option on the splash screen (shown above)

2. On the SMC Logo screen, click the [Next] button to start.

3. Click the [Next] button again.

4. Accept the License Agreement, and click the [Next] button to continue.

5. Enter in the Username and Organization information and set access rights, then click the

[Next] button to continue.

6. Confirm the installation location, and then click the [Next] button to continue. Default install

location is: C:/Program Files/SMC.

Note: You can change the installation location by clicking the [Change…] button.

7. Confirm the Installation information. Then click the [Install] button to begin the process.

8. To complete the Installation click the [Finish] button.

Other manuals for HP1D-USB

This manual suits for next models

Table of contents

Other SMC Networks Adapter manuals

SMC Networks

SMC Networks WiShare SMCWTVA100 User manual

SMC Networks

SMC Networks SMC EZ Connect Turbo SMC2402W User manual

SMC Networks

SMC Networks EZ Networking SMC2208USB/ETH User manual

SMC Networks

SMC Networks HPAV-ESW - FICHE TECHNIQUE Operating and safety instructions

SMC Networks

SMC Networks SMCHPAVH-ETH User manual

SMC Networks

SMC Networks Elite16 Series User manual

SMC Networks

SMC Networks SMCWUSB-G User manual

SMC Networks

SMC Networks SMC2335W EZ Connect User manual

SMC Networks

SMC Networks HPAV-ESW User manual

SMC Networks

SMC Networks SMCWUSB-G User manual

SMC Networks

SMC Networks SMCBT-EDR User manual

SMC Networks

SMC Networks SMC2336W-AG User manual

SMC Networks

SMC Networks WUSBS-N2 FICHE User manual

SMC Networks

SMC Networks WUSBS-N3 User manual

SMC Networks

SMC Networks EZ Connect N SMCWUSB-N2 User manual

SMC Networks

SMC Networks HPAV-ETH User manual

SMC Networks

SMC Networks EZ Connect SMC2635W User manual

SMC Networks

SMC Networks EZ connect N SMCWPCI-N5 User manual

SMC Networks

SMC Networks WCB-G2 FICHE User manual

SMC Networks

SMC Networks HPAV-ETH - FICHE TECHNIQUE Operating and safety instructions

SMC Networks

SMC Networks SMCWAA-B User manual

SMC Networks

SMC Networks 2671W User manual

SMC Networks

SMC Networks EZ Connect SMC2655W User manual

SMC Networks

SMC Networks SMCWUSB-G User manual

Popular Adapter manuals by other brands

PCB Piezotronics

PCB Piezotronics 090B274 Installation and operating manual

Auvidea

Auvidea J20 Technical reference manual

Gossen MetraWatt

Gossen MetraWatt AT3-III E operating instructions

Akribis

Akribis ITF-21-BISS-MIT user manual

Tenda

Tenda W54U user guide

ROHO

ROHO AGILITY Operation manual

PROLiNK

PROLiNK WN2001 Quick installation guide

Hawking

Hawking HUF2 Specifications

Airlink101

Airlink101 AWLC4030 user manual

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter user manual

Philips

Philips SWA4554S/10 user manual

JVC

JVC TS-C9D2B Assembly and installation instructions

NETGEAR

NETGEAR A6100 quick start

D-Link

D-Link DWA-121 Quick install guide

Philips

Philips SWA2037 Specifications

Basalte

Basalte 0610-20 installation manual

Yealink

Yealink EHS40 user guide

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A installation guide