SMARTFOX PRO LIGHT 2 User manual

OPERATING INSTRUCTIONS

08 - 2022

www.smartfox.at

SMARTFOX PRO LIGHT 2

DECLARATION SAFETY

INSTRUCTIONS

www. sm ar tfox. at

WARNING

Non-compliance can lead to damage to property and personal injury. The

instructions given must therefore always be followed or implemented!

ATTENTION

Non-compliance can lead to malfunctions or damage to the unit. The

instructions given must therefore always be followed or implemented!

NOTE

Useful tips to support you during commissioning. The instructions given are not

mandatory.

TABLE OF CONTENTS

www. sm ar tfox. at

General

notes .........................................................................................................................4

Conformity.

................................................................................................................

Application

..................................................................................................................

Function

......................................................................................................................

Scope of delivery and technical data.

.................................................................

Regulations

................................................................................................................

Dimensions

................................................................................................................

Assembly

....................................................................................................................

Electrical connection. ................................................................................................6

Installation of SMARTFOX current transformers

..........................................................7

SMARTFOX auxiliary current transformer

.........................................................................8

Wiring diagram ....................................................................................................................9

Power controller & heating element 1-phase........................................................9

Power controller & heating element 3-phase......................................................10

Consumer via relay.

..............................................................................................

Main menu ...........................................................................................................................12

Navigation through the menu.

.............................................................................

Display of the measured values.

........................................................................

Display switching status..........................................................................................14

Date & Time.

...........................................................................................................

SD card

......................................................................................................................15

Software version.

...................................................................................................

Serial number.

.........................................................................................................

Parameterisation .............................................................................................................17

Getting started with parameterisation.

..............................................................

Analogue output.......................................................................................................17

Relay. ........................................................................................................................19

Control behaviour: Consumer.

..........................................

Heat pump.

...............................................................................................

Analogue relay.

........................................................................................

Heating rod2..............................................................................................22

Temperature sensor.

.............................................................................................

Current transformer ratio.

.....................................................................................

Edit energy values.

................................................................................................

Firmware

update

.................................................................................................................27

GENERAL INFORMATION

www. sm ar tfox. at

General

notes

These operating instructions are part of the scope of delivery. They contain the

information required for proper use. They are intended for electrotechnical

personnel or specialists who are familiar with the installation, assembly and

commissioning of the product described here. Should further information be

required, additional information can be requested from the contact details on the

back.

Conformity

This appliance complies with the provisions of the Directive of the Council of the

European Communities on the approximation of the laws of the EC Member

States relating to electromagnetic compatibility, EMC Directive 2004/108/EC, and

the Low Voltage Directive 2006/95/EC.

Application

The "SMARTFOX Pro Light 2" energy consumption controller is used to optimise

self-consumption to a maximum in electrotechnical systems with self-power

generation. All relevant data for the application are measured, displayed and used

for control. If desired, the measured values are stored when the microSD card is

activated and shown on the 2-line (2x16 digits) display. Displayed measured

values are voltage, current and power of the individual phases L1, L2, L3 as well

as the total currents and powers. Calculated values are PNutz, work, energy,

regenerated energy.

Function

The currents to be measured are measured either directly or via current

transformers. The voltage is always measured directly (according to the

connection diagram). The main function of the unit is to detect the current surplus

power, calculated by UxI, and thus to control a continuously controllable consumer

with exactly this amount of energy. This is done via the analogue output 0/4-20mA.

In addition, a relay make contact is available with freely selectable power and

switch-on times per day.

SCOPE OF DELIVERY & TECHNICAL

DATA

www. sm ar tfox. at

Rated current 80A or via additional transformer

4995A

Analogue outputs

1 x 24VDC | 1 x 0/4-20mA

Overload continuous Voltage max. 265V, current 260A

Scope of delivery

1x SMARTFOX Pro Light 2 energy consumption

controller

1x Micro SD card incl. adapter

1x current transformer 3-phase up to 80A | 100A incl.

connection set

1x operating manual

Technical

data

Dimensions [W/H/D] 98mm x 90mm x 58mm (5TE)

Power supply 3 x 230V/400VAC 50Hz

Display 2-line display

Switching output 1 x normally open relay 5A/250VAC

Temperature input PT1000

Surge overload Voltage 1000V 65 s

Self-consumption 4W

Interface RS485

Connection

L1/L2/L3/N/PE 3xL 1xN 1xPE 1.5mm²

Analogue output pluggable 24VDC/I+/GND

1mm²

Converter Pluggable 1xRJ12 6pol.

Relay 2x1,5mm²

SCOPE OF DELIVERY & TECHNICAL

DATA

www. sm ar tfox. at

REGULATIONS

www. sm ar tfox. at

EMC DIN EN61326

Hedging

When connecting, ensure that a suitable back-up fuse is used (line protection).

The unit itself is internally fused.

Mechanical strength DIN EN 61010 Part 1

Accuracy, overload air

and creepage distance

connection

DIN EN 60688

DIN EN 61010 Part 1

DIN 43807

Assembly

Top-hat rail mounting. At ambient temperatures of >45°C, however, a distance of

10mm is recommended. The mounting location should be as vibration-free as

possible and must not exceed an ambient temperature of 55°C.

Electrical

connection

The regulations for the installation of electrical systems must be observed, according

to DIN 43807, max. 1.5mm² via screw connection. When installing the current

transformer, the correct current direction K and L must be observed (K corresponds

to the utility side, L corresponds to the system side).

ATTENTION!

When connecting the voltage input variable, the assignment to the current

connection is important, i.e. the respective terminal of the voltage connection

must also be located in the outer conductor in which the current transformer is

located.

Electrical safety DIN EN 61010 Part

1 Housing with protective insulation, protection

class II, for working voltages up to 600V (mains to

neutral) pollution degree 2, measuring category

CAT III

Warning.

This unit may only be installed by a qualified electrician, otherwise there is a risk of

fire or electric shock!

Protection class DIN EN 60529 Housing IP21

Disconnection DIN EN 61010 Part 1, 3, 3KV 50Hz 4s

REGULATIONS

www. sm ar tfox. at

INSTALLATION OF THE SMARTFOX CURRENT

TRANSFORMER

www. sm ar tfox. at

Attention! The SMARTFOX current transformers must always be connected as

shown in the picture above. (Arrows point in the direction of the consumer).

Post-counter field

Counter field

Pre-counter field

24V IO 0V

0V + - PT1000

CJG 441D 40A/I n0,03A G

L1 L2 L3 N PE

K K

L L

L1 L2 L3 L1 L2 L3 N L2 L3 L1

Current

transformer

L1 L2 L3

0057348

kWh

M13 0122

Energy meter

KL3

V20-C V20-C V20-C

P H

A I

80A

SMARTFOX ADDITIONAL CURRENT

TRANSFORMER

www. sm ar tfox. at

0V UO IO 24V 0V + - S0+ S0- PT1000 24V 0V RX TX

K K

L1 L2 L3 N PE R1 R2 R3 R4

L L

L1 L2 L3 N PE

KR1

WARNING!

The SMARTFOX current transformer cable must not be cut (loss of warranty).

NOTE!

The SMARTFOX current transformer set can be extended up to 15m. A suitable

current transformer extension must be used for this purpose.

ADDITIONAL

CURRENT

TRANSFORMER

L3 L

SW divisible 200A with 1m connection cable

ART NO. 0791732486490

SW divisible 500A / 5A 1m connection cable

ART NO. 0791732486650

CURRENT WALLER

SMARTFOX K L K

LK L

24V

0V 0V

Current transformer extension

optional up to 15 m.

ART NO. 0791732486520

000 3 1 27

kWh

PT1000

Table of contents

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual