Sipura SPA-1001 User manual
Section 1 – Getting Started
When you receive your SPA- 00 it should contains the following items:
. SPA- 00
2. Power supply
3. Phone cable
4. Network cable
5. Quickstart guide
Setting up the hardware:
Step : Connect the power cable to your SPA- 00
Step 2: Connect the network cable from your SPA- 00 to your DHCP enabled modem/router
Step 3: Connect an analogue phone to the “Phone” port in the SPA- 00 .
Step 4: Turn the power on
Step 5: Pick up the phone and dial **** (You should hear a voice saying Sipura Configuration Menu)
Step 6: Dial 0# (Write down the IP address that is returned) (See Appendix E for all phone menu options)
At this stage, you can choose whether to upgrade the firmware. The latest version of the
SPA- 00 firmware at the time of writing this document is
To upgrade the firmware see Appendix C.
Section 2 – Configuring the SPA-1001 via the Web Interface
Once you have the IP address of your SPA- 00 you can access the web interface by
opening a web browser and typing the following in the Address :
http:// <IP Address of SPA-1001>
For example: http:// 92. 68. . 0
You should now see the Sipura SPA- 00 Phone Adapter Configuration screen. Now you
will need to log into the unit as Administrator and change the view to advanced. See images below.
Click on “Admin Login”
Click on “advanced”
Note: You can also go directly to the admin/advanced section by typing
http:// 92. 68. . 0/admin/advanced
Section 3 – Regional Settings
Click on the “Regional” tab.
The following changes are optional, however they will make your SPA-3000 sound more
Australian. Under the Call Progress Tones and Distinctive Ring Patterns headings change:
Dial tone: 400@- 9,425@- 9,450@- 9; 0(*/0/ +2+3)
Busy Tone: 425@- 9; 0(.375/.375/ )
Reorder Tone: 425@- 9, 425@-29;60(.375/.375/ ,.375/.375/2)
Ring Back Tone: 400@- 9,425@- 9,450@- 9;*(.4/.2/ +2+3,.4/2/ +2+3)
MWI Dial Tone: 400@- 9,425@- 9,450@- 9;2(. /. / +2); 0(*/0/ +2)
Ring Cadence: 60(.4/.2,.4/2)
The following changes are required under the Miscellaneous heading :
FXS Port Impedance: 220+820|| 5nF
If you would like to configure the Time and Daylight savings, see Appendix D. This is
completely optional.
Section 4 – Line 1 or Line 2 Settings
Click on the “Line ” or “Line 2” tab.
The settings for Line and Line 2 are identical, so for each provider you want to register
follow the instructions below:
The first thing that needs to be changed is under the Proxy and Registration heading. Here
you will need to enter the proxy and registration information given to you by your VoIP provider.
The following image shows the setup for MyTel.
The second thing that needs to be configured is under the Subscriber Information heading.
Here you will need to enter your user id and password for given to you from your VoIP provider.
For some VoIP providers you will also have to enter the Auth ID and set Use Auth ID to
yes, for others you will not.
The next thing that needs to be altered is under the Audio Configuration heading. The
following change is required.
Preferred Codec: G729a
The final item that requires changing is under the Dial Plan heading. The dial plan will vary
from provider to provider. The dial plan show below is an example only, and may require alteration
depending on which VoIP provider you subscribe to. See Appendix A for a detailed description of
how dial plans work.
Dial Plan: (*xx|xx.)
Section 5 – Phone Settings
Click on the “Phone” tab.
Under the Line Section heading, you can set which line (or provider) you wish to use as
your default outbound provider.
Default Line: Line or Line 2 (which ever you choose)
Alt Dial Tone Multiplier: Used to convert the dial tone, so you know you have switched
lines. A multiplier of . sounds ok.
Line 2 Select Code: The character or characters used to switch to the 2nd line.
Everything should now be setup and ready to use. Make sure you press the Submit All
Changes button to save the settings to the SPA- 00 .
The Submit All Changes button will save the changes on all pages. You can however hit that
button at the end of each section if you wish to do so.
Appendix A – Dial Plans
Dial plans can be very confusing at first glance. However they are invaluable feature of the
SPA- 00 so you should at least learn the basics of how they work. The following dial plans are to
show how to use the various features of dial plans. You should play around with them to suit your
needs.
Dial Plan Syntax
( ) - The entire dial plan must be surrounded by an open and close bracket.
|- Each individual dial plan must be separated by a pipe | character.
0-9 - Treated as normal digits
x- Treated as any normal digit 0-9 on phone
*- Treated as normal * character on phone
#- Treated as normal # character on phone
.- Repetition
< : > - Replacement, eg <02:6 2> means replace 02 with 6 2
S0 - Dial Immediately
!- Barring a number, place this at the end of the number to bar it
,- Provides a dial tone
[ ] - Limiting choices, eg [24] means either 2 or 4, [2-5] means 2,3,4 and 5, [24-68]
means 2,4,5,6,8
Example Dial Plans
Dial Plan 1: (<* :0 23456789>)
Description: This plan demonstrates replacement. If you dial a * followed by a then the
number 0 23456789 would be dialed.
Dial Plan 2: (<0:6 >[2-9]xxxxxxxxS0)
Description: This plan demonstrates replacement and limiting choices. When you dial an 0
followed by a 2,3,4,5,6,7,8 or 9 and then nine of any other digit (0-9) it will
prepend 6 and remove the 0. So if you rang 02 23456789 the actual number
that would be called would be 6 2 23456789.
Dial Plan 3: ( 900xxxxxx!)
Description: This plan demonstrates number barring. If you enter a 900 followed by 6
more digits (0-9) you call will not be placed.
Appendix B - Factory Reset
To perform a factory reset on your SPA- 00 dial **** on the phone. You should hear a
Sipura message asking you to enter your selection. . Then dial 73738#.
WARNING: This will restore your unit back to factory defaults, all your information will
be lost.
See Appendix E for all Phone Menu Options.
Table of contents
Other Sipura Adapter manuals
