user uses 2nd (TX)and walk near the car, the 2nd (TX)will not auto unlock the car.
The user must press button 1 on the 2nd (TX) to activate the system. Once the 2nd (TX) is in use, the
1st (TX) will enter to sleep mode.
Troubleshooting Questions
1. Why I approach the car the doors don't unlock?
First of all, you need confirm EG360 function is enabled, please refer your user manual.
2. Why my spare remote cannot ork on keyless entry?
The system will recognize the last remote control which has been activated automatic keyless entry
function; the spare remote control will disable or in the standby mode for automatic lock / unlock
function.
3. Ho to activate the spare remote control automatic lock/unlock function?
Press the big button for 1 second, parking light will flash 1 second to confirm that it is activated.
4. When do I kno that the battery is lo ?
Arm the system, horn chirp once, parking light flashes 4 times. If disarm, horn chirp twice, parking
lights flashes 5 times. Regular response: when arm the system, horn chirp once, parking light
flashes 1 time, When disarm just parking lights flashes 2 times.
5. When the battery is lo , ho should I operate ?
The remote key enters passive backup mode while the battery is low and press Button ONE to
unlock.
6. Does any external conditions may impact the EG360?
If your car surround by Low Frenquency signal (e.g at service station), it may result in the EG360
function disable , because transmitter communicate with transponder via an low frequency,
however, you can operate via press unlock button in this condition.
7. Does this systems drain the vehicle's battery?
No, it doesn't. If the transmitter standby excesses 48 hours, it will enters vacation mode, and it
consumes the power in the minimum level.
SINGTECH EG360 Alarm System 4 10170361A
