23/8
SIMU S.A.S. au capital de 5 000 000 € - Zone Industrielle Les Giranaux - 70100 ARC-LÈS-GRAY - FRANCE - RCS VESOUL B 425 650 090 - SIRET 425 650 090 00011 - n° T.V.A CEE FR 87 425 650 090
WARNING! Important safety instructions. Carefully read and comply with all the warnings and
instructions that come with the product as incorrect installation can cause injury to people and
animals and damage to property. The warnings and instructions give important information regarding
safety, installation, use and maintenance. Keep hold of instructions so that you can attach them to the
technical file and keep them handy for future reference.
1.1 GENERAL SAFETY
This product has been designed and built solely for the purpose indicated herein. Uses other
than those indicated herein might cause damage to the product and create a hazard.
- The units making up the machine and its installation must meet the requirements of the following
European Directives, where applicable: 2004/108/EC, 2006/95/EC, 2006/42/EC, 89/106/EC,
99/05/EC and later amendments. For all countries outside the EEC, it is advisable to comply with
the standards mentioned, in addition to any national standards in force, to achieve a good level
of safety.
- The Manufacturer of this product (hereinafter referred to as the “Firm”) disclaims all responsibility
resulting from improper use or any use other than that for which the product has been designed, as
indicated herein, as well as for failure to apply Good Practice in the construction of entry systems
(doors, gates, etc.) and for deformation that could occur during use.
- Installation must be carried out by qualified personnel (professional installer, according to EN
12635), in compliance with Good Practice and current code.
- Before commencing installation, check the product for damage.
- Make sure the stated temperature range is compatible with the site in which the automated system
is due to be installed.
- Do not install this product in an explosive atmosphere: the presence of flammable fumes or gas
constitutes a serious safety hazard.
- Disconnect the electricity supply before performing any work on the system. Also disconnect buffer
batteries, if any are connected.
- Make sure the earth system has been installed correctly: earth all the metal parts belonging to the
entry system (doors, gates, etc.) and all parts of the system featuring an earth terminal.
- Installation must be carried out using safety devices and controls that meet standards EN 12978
and EN 12453.
- Install any fixed controls in a position where they will not cause a hazard, away from moving
parts. More specifically, hold-to-run controls must be positioned within direct sight of the part being
controlled and, unless they are key operated, must be installed at a height of at least 1.5 m and in
a place where they cannot be reached by the public.
- Attach a label near the operating device, in a permanent fashion, with information on how to
operate the automated system’s manual release.
- Only use original spare parts for any maintenance or repair work. The Firm disclaims all
responsibility for the correct operation and safety of the automated system if parts from other
manufacturers are used.
- Do not make any modifications to the automated system’s components unless explicitly authorized
by the Firm.
SAFETY INSTRUCTIONS
1
5124491B Read carefully these
instructions before any use. DECLUTCHING
SECURITY BOX
EN- TRANSLATION OF THE ORIGINAL MANUAL
