SIIG CE-H23811-S1 User manual

04-1125A

Dual Antenna Wireless Multi-Channel

Expandable HDMI Extender

Installation Guide

Introduction

The Dual Antenna Wireless Multi-Channel Expandable

HDMI Extender wirelessly transmits HDMI signals with

stereo audio up to 165ft.

Features andBenefits

•Supports up to 2 transmitter units (part # CE-

H23811-S1 sold separately) and 2 receiver units

(part # CE-H23911-S1 sold separately). Allows

you to choose and broadcast any of the 2 sources

to any of the 2 displays simultaneously

•Dual antenna design greatly improves the quality

of a wireless link for more stable and seamless

video

•5GHz wireless technology with 10 selectable

wireless channels prevents signal interference

•Built-in HDMI output on the transmitter allows

for local monitoring of the extended display

•Built-in switch button and the included palm size

remote allows control over selection of wireless

channels for both RX and TX units to retrieve

different video content or set for channel pairing

•Included IR extension modules allow remote

controlling of the HDMI source device from the

display unit

•Premium aluminum housing that enhances

durability. Slim and low profile design is versatile

enough to adopt into any environment

Note: The transmission distance will vary depending on building layout,

electronic interference, other environmental conditions, and may be much

less than the maximum.

PackageContents

•Dual Antenna Wireless Multi-Channel Expandable

HDMI Extender

•IR blaster extension cable

•IR receiver extension cable

•Power adapters (x2)

•Remote control (with one battery)

•Installation Guide

Specifications

Wireless Technology 5 GHz

Signal Type HDMI

HDMI Version HDMI 1.3 compatible

HDCP Version HDCP 1.2 compatible

Transmission Distance Up to 50m (165ft)

Supported Resolutions 1080p/1080i/720p/576p/576i/480p/480i

HDMI Cable Distance Up to 5m (Input & Output)

Audio Format R/L stereo audio (2-ch)

Power

Input:

AC 100-240V, 50/60Hz

Output:

DC 5V/2A

Color Black

Dimensions (TX/RX) 5.51" (W) x 0.98" (H) x 3.10" (D)

Weight (TX/RX) Approx. 0.55 lbs

Operating Temperature 32 to 122 degrees F

Storage Temperature 14 to 140 degrees F

Operating Humidity 0% ~ 90% RH (non-condensing)

Product Layout

Figure 1: Transmitter (TX) - front side

Switch button

• Input channel indicator: Indicates the input

channel selected. There are 10 channels (0-9)

• Switch button: Press to select the channel

• IR window: Receives infrared signals from the

included remote control

• Reset button: Press to reset the transmitter

IR window

Figure 2: Transmitter (TX) - rear side

• Antenna port: Attach the included Antenna here

• Power jack: Connects to the included power

adapter

• HDMI In: Connects to your HDMI source with a

HDMI cable (cable not included)

• Input indicator: On when the HDMI signal is

detected

• Connection indicator: On when the transmitter

and receiver are linked

HDMI In IR Out

Input channel indicator

Reset button

Power jack

Antenna port

Connection indicator

HDMI Out

Antenna port

Input indicator

Figure 3: Receiver (RX) - front side

Figure 4: Receiver (RX) - rear side

• Antenna port: Attach the included Antenna here

• Power jack: Connects to the included power

adapter

• Connection indicator: On when the transmitter

and receiver are linked

• Output channel indicator: Indicates the channel

selected. There are 10 channels (0-9)

• Switch button: Press to select the channel

• IR window: Receives infrared signals from the

included remote control

• Reset button: Press to reset the receiver

• HDMI out: Connects to a local HDMI diaplay

• IR out: Plug the IR Blaster extension cable here

Switch button

IR windowOutput channel indicator

Reset button

Power jack Connection indicator

HDMI Out

Antenna port

Antenna port IR in

Data transmission

indicator

Figure 5: IR blaster

extension cable (IR OUT)

Figure 6: IR receiver

extension cable (IR IN)

• IR blaster extension cable (IR OUT): Plugs into

the Transmitter's IR Out socket. It emits the IR

signals received from the IR receiver extension

cable of the Receiver unit and directs it to the

HDMI source's IR receiver window

• IR receiver extension cable (IR IN): Plugs into

the Receiver's IR In socket. It receives IR signals

from the HDMI source's remote control and

directs it to the IR blaster extension cable of the

Transmitter unit

• Data transmission indicator:

- Blinks slowly when searching for wireless signal

- Blinks fast when wireless signal is linked

• HDMI Out: Connects to your HDMI display with a

HDMI cable (cable not included)

• IR in: Plug the IR Receiver extension cable here

• Antenna port: Attach the included Antenna here

IR Extension cables (20-60Hz Frequency Range)

The IR Extension feature allows you to control your

HDMI source device from a remote location.

Hardware Installation

1. Power off all devices including your HDMI source

and display.

2. Attach the included antennas to the TX and RX.

3. Connect your HDMI source to the Transmitter's

HDMI IN connector.

4. Connect your HDMI display to the transmitter's

HDMI OUT. This connection is optional and

needed only when local moniting of the video

signal is desired.

5. Optional: Connect the IRBlaster extension cable

to the Transmitter's IR Out. Face the eye towards

your HDMI device's IR window. This connection is

needed only if you need to control your HDMI

source from the remote location.

6. Connect your HDMI display to the Receiver's

HDMI OUT connector with an HDMI cable (not

included).

7. Optional: Connect the IR Receiver extension

cable to the Receiver's IR In. This connection is

needed only if you need to control your HDMI

source from the remote location.

8. Plug the included power adapters into the

Transmitter's and Receiver's Power Jacks, then

plug both power adapters into reliable power

outlets.

9. Power on your HDMI device and HDMI display.

10. Use the included remote control or built-in switch

button to select the same channel for the TX and

RX (for channel pairing).

11. The device is ready for use.

Application

Extends HDMI A/V signals to a remote display up to

165ft away and supports high resolutions up to 1080p

Full HD.

Figure 7

Figure 8

Note: The transmission distance will vary depending on building layout,

electronic interference, other environmental conditions, and may be much

less than the maximum.

Multicast ability: Broadcasts and independent

streams video content to two remotely located

displays simultaneously*.

* Remark: Extra receiver unit (CE-H23911-S1) sold separately

Matrix (2 TX's to 1 RX): Select any of the 2 sources* to

broadcast to the display.

* Remark: Extra transmitter unit (CE-H23811-S1) and receiver unit

(CE-H23911-S1) sold separately

Figure 9

* Remark: Extra transmitter unit (CE-H23811-S1)

sold separately

Matrix (2 TX's to 2 RX's): Allows you to switch and

select any of the 2 sources* to broadcast to any of the

2 displays*.

Figure 10

Notice

•Wireless signals transmitted through walls, glass,

brick or other solid objects will cause signal loss

and decrease the transmission distance

•It's recommended that the distance between

two receivers not less than 3 meters

• DO NOT expose the unit to rain, moisture, or

liquids

• DO NOT open the housing, doing so will void the

warranty and may cause personal injury due to

electronic hazard

• DO NOT plug-in or take-out the IR extension

cables when the unit is powered on

FAQ & Solutions

Q: The transmitter unit and receiver unit can't

connect with each other:

A: 1) Please check that both transmitter and receiver

are powered on.

2) Please check the input channel of the

transmitter and output channel of the receiver

are the same.

3) Please check if there is HDMI signal input from

the Transmitter (TX) unit.

4) Use different HDMI cables.

Q: The display is not clear or stable:

A: 1) Check the HDMI cable lengths are within 5m.

2) Check the transmission distance is within 50m.

3) Remove other wireless signals and move any

obstacles that are blocking the signal.

4) Decrease the distance between the transmitter

unit and the receiver unit.

This manual suits for next models

Table of contents

Popular Extender manuals by other brands

SY HDBT-60T installation guide

Appsys ProAudio

Appsys ProAudio ADX-16 user manual

Atlona

Atlona RS232 user manual

IDK

IDK OPF-TH1000-A user guide

Enable-IT

Enable-IT 824WP quick start guide

Worx

Worx Landroid RadioLink WA0864 Get started

TP-Link

TP-Link TL-WA730RE user guide

Camplex

Camplex CMX-HDMI-SFPL user manual

SC&T

SC&T HE03-4K user manual

Marmitek

Marmitek MegaView70 user manual

Samsung

Samsung SCS-26UC4 user guide

Foxun

Foxun SX-GES24 operating instructions

MuxLab

MuxLab 500771 Operation manual

foxunhd

foxunhd SX-AEX01 operating instructions

TERK Technologies

TERK Technologies LFIRX2 owner's manual

Devolo

Devolo Audio Extender supplementary guide

Edimax

Edimax EW-7438RPn V2 instructions

Shinybow USA

Shinybow USA SB-6335T5 instruction manual