Siemens HMS-S User manual

Siemens Building Technologies

Fire Safety

P/N 315-033200-2

INTRODUCTION The SIEMENS Model HMS-S and HMS-D Manual

Stations a e add essable devices containing advanced

cont ol panel communication technology. This technol-

ogy, which p ovides two-di ection communication with

the cont ol panel, p oduces an Intelligent Initiating

Device. The HMS-S is single action; the HMS-D is

double action.

PROGRAMMING Refe to Figu e 1 to locate the opening on the HMS cove that allows access to the

p og amming holes which a e on the HMS p inted ci cuit boa d.

To connect the HMS to the DPU P og amme /Teste , inse t the plug f om the DPU

cable p ovided with the P og amme /Teste into the opening on the HMS as shown

in Figu e 2. Because HMS devices a e pola ity insensi-

tive, the p og amming plug can be inse ted into the

p og amming holes in eithe di ection.

To prevent potential damage to the DPU DO NOT

connect an HMS to the DPU until at least one wire is

removed from terminals 1 or 2 of the HMS.

Follow the inst uctions in the DPU Manual

(P/N 315-033260) to p og am the HMS to the desi ed

add ess. Reco d the device add ess on the label

located on the HMS f ont panel. The HMS can now

be installed and wi ed to the system.

OPERATION The HMS-S and HMS-D manual stations ope ate with the Fi eFinde -XLS Cont ol

Panel via the DLC Device Loop Ca d.

The HMS-S and HMS-D manual station housings have a pull down leve that locks in

position afte eleasing a sp ing loaded switch. (See Figu e 4.) To indicate the manual

station is activated, the pull down leve emains down and locked until the station is

physically eset.

The HMS-D has an additional leve labeled PUSH IN which must be ope ated fi st.

Both models a e eset by opening the hinged housing cove with an Allen key and

then closing and locking the cove .

Figure 1

HMS Cover

Single/Dual Action Manual Pull Station

Installation Instructions

Models HMS-S / HMS-D

OPENING TO

PROGRAMMING

POINTS

PLUG FROM

DPU

LOCATING TAB

PROGRAMMING

POINTS

Figure 2

Connecting the DPU Plug

INSTRUCTIONS

WIRING

INSTALLATION Dist ibute the manual station boxes th oughout the p otected a ea so that they

a e unobst ucted, eadily accessible, and located in the no mal exit path. Place the

manual station acco ding to the egulations of the autho ities having ju isdiction.

Su face Mounting Mount the backplate to a SIEMENS Model SB-5R Backbox as shown in Figu e 4.

Flush Mounting Mount the backplate to a use supplied single gang switchbox.

Do not overtighten the screws. Overtightening ma distort the backplate.

Figure 4

Mounting The HMS

Figure 3

Wiring Inform tion

TO NEXT ADDRESSABLE DEVICE

DLC LINE 1

DLC 1LINE

DLC 2LINE

EARTH GROUND

FROM INITIATING CONTROL PANEL

OR PREVIOUS ADDRESSABLE DEVICE

NOTES:

1. Recommended wire sizes:

18 AWG minimum, 14 AWG maximum

2. Wire larger than 14 AWG can damage the connector.

3. When using shielded cable without metal raceway or with nonmetallic

raceway, the shields should e terminated at the device ground

terminal. If the device ox is already grounded y another means, such as

eing mounted to a grounded structure, the wire shields should e

continuous and must e grounded solely at the point of origin; for

example, at the control panel.

4. When using shielded cable with metal raceway, the wiring shields shall

e continuous and grounded solely at the point of origin. The device

ground terminal shall e connected to the grounded device ox.

5. When using metal raceway without shielded cable, connect the device

ground terminal to the grounded device ox.

6. Metal raceway should e thoroughly grounded throughout the system.

7. In supervisory: HMS-S and HMS-D draw 1mA.

8. The HMS-S and HMS-D are polarity insensitive devices. Line 1 and Line 2

can e either line of the loop.

Siemens Building Technologies, Inc.

8 Fernwood Road

Florham Park, New Jersey 07932

Siemens Building Technologies

Fire Safety

Siemens Building Technologies, Ltd.

2 Kenview Boulevard

Brampton, Ontario L6T 5E4 CN

P/N 315-033200-2

3½ INCH DEEP

SWITCH BOX

(USER SUPPLIED)

MODEL

SB-5R

BACKPLATE

SURFACE

MOUNTING

ENCLOSURE

FLUSH

MOUNTING

ENCLOSURE

HOUSING HINGED

TO BACKPLATE

HOUSING

LOCKING

SCREW

5½ in.

3 in.

4 in.

2¾ in.

3½ in.

NAMEPLATE

This manual suits for next models

Other Siemens Security System manuals

Siemens

Siemens Sensor Light User manual

Siemens

Siemens NCC-G16 User manual

Siemens

Siemens Cerberus PACE User manual

Siemens

Siemens Cerberus PACE Guide

Siemens

Siemens SIRIUS 8WD42 User manual

Siemens

Siemens IC60 User manual

Siemens

Siemens SISTORE AX4 User manual

Siemens

Siemens TZC-8B User manual

Siemens

Siemens IC60 User manual

Siemens

Siemens Novigo Core Service manual

Siemens

Siemens MI291A Guide

Siemens

Siemens FDS229-A User manual

Siemens

Siemens SPCY130 User manual

Siemens

Siemens FS20 User guide

Siemens

Siemens WAC 12 User manual

Siemens

Siemens Codelock K44 Duo Instruction Manual

Siemens

Siemens SIMATRIX NEO 2GF2211-8EA Instruction manual

Siemens

Siemens MI290A Guide

Siemens

Siemens CERBERUS PYROTRONICS ADB-3 User manual

Siemens

Siemens HFPO-11 User manual

Siemens

Siemens FDM225 User manual

Siemens

Siemens FDM273 User manual

Siemens

Siemens DMS8000 Technical manual

Siemens

Siemens FDM275 User manual

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

DSC

DSC PC 4010 Programming manual