Siemens FLN User manual

Installation Instructions

Document No. 545-433

Rev. 4, September, 2002

FLN Controller Memory Board Upgrade

Item Number 545-433-04 Page 1 of 2

Product Description

This memory board upgrades all previous

configurations of the FLN Controller to 4 MB flash

read-only memory (ROM). Upgrades have 2 MB or 4

MB random-access memory (RAM) for 6 MB or 8 MB

of total memory.

Product Numbers

545-797 APOGEE FLN Controller Memory Board

Upgrade, 8 MB total memory (4 MB RAM)

with Firmware 2.x

545-795 APOGEE FLN Controller Memory Board

Upgrade, 6 MB total memory (2 MB RAM)

with Firmware 2.x

Caution Notation

CAUTION:

Equipment damage or loss

of data may occur if you do

not follow a procedure as

specified.

Required Tools

Electro-static discharge (ESD) wrist strap

Prerequisites

CAUTION:

Be sure to back up the database.

You will lose data when the power is turned

OFF and the memory board is removed

from the controller board.

Expected Installation Time

35 minutes

Installation

1. Place the electro-static discharge wrist strap on

your wrist and secure the clip to a good earth

ground. Make sure you do not touch any

components on the memory board.

2. Turn OFF the FLN controller board power.

(Figure 1).

FLN0011R1

POWER

SWITCH

VDC

GROUNDING

SPADE

JP2

Figure 1. Power Switch on the Controller Board.

3. Pull the controller board out from the two top

standoffs and rest the board at a 10°angle

(Figure 2).

FLN0022R1

Figure 2. Controller Board at 10qAngle.

Document No. 545-433

Installation Instructions

Rev. 4, September, 2002

Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and

models as design improvements are introduced. Other product of company names mentioned herein may be the trademarks of their

Siemens Building Technologies, Inc.

1000 Deerfield Parkway

Buffalo Grove, IL 60089-4513

USA

Your feedback is important to us. If you have

comments about this document, please send

them to technical.editor@sbt.siemens.com

Document No. 545-433

Printed in the U.S.A.

Page 2 of 2

FLN0012R1

Figure 3. Memory Board Replacement.

4. Simultaneously pry open both memory board card

ejectors and carefully slide the board out of the

memory board cover slots (Figure 3).

5. With the memory board connector facing the

controller board, gently slide the upgrade board

into the memory board cover slots until the board

is firmly seated.

6. Simultaneously push down on the card ejectors to

lock the memory board in place.

7. Return the controller board to its fully installed

position by pushing the memory board cover until

both standoffs snap into position.

8. Turn ON the FLN controller board power.

9. Reload the database.

The installation is now complete.

Other Siemens Controllers manuals

Siemens

Siemens ECOFAST 3RK1303 S AA Series User manual

Siemens

Siemens Simatic S7-300 User manual

Siemens

Siemens QPA84 User manual

Siemens

Siemens SINUMERIK 840D sl Quick start guide

Siemens

Siemens SINAMICS G130 User manual

Siemens

Siemens OpenAir GBB13 1 Series User manual

Siemens

Siemens OpenAir GSD 1 Series User manual

Siemens

Siemens 7SR224 Operating and installation instructions

Siemens

Siemens RVA63.280 Operator's manual

Siemens

Siemens SIMATIC S5 Series User manual

Siemens

Siemens Simatic S7-1500 User manual

Siemens

Siemens SIMATIC S7-1200 CP 1243-8 IRC User guide

Siemens

Siemens N350E Service manual

Siemens

Siemens Automatic Star-Delta 3TE05 2AR0 Series User manual

Siemens

Siemens Simatic S7-300 User manual

Siemens

Siemens SIRIUS Series User guide

Siemens

Siemens SKB32 Series User manual

Siemens

Siemens SINUMERIK 808D User manual

Siemens

Siemens GDB 9E Series User manual

Siemens

Siemens S7-1200 TELECONTROL User manual

Siemens

Siemens SINUMERIK 802C User manual

Siemens

Siemens SSA31.04 User manual

Siemens

Siemens ecofast 3RK1702-2GB18-0AA1 User manual

Siemens

Siemens ACVATIX SQV..P Series User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide