Siemens Desigo TRA QMX3.P36F User manual

1601

1601p01en

Desigo™ TRA

Freely configurable

flush

-mounted room

operator unit for KNX

PL-Link

QMX3.P36F

QMX3.P36G

•Freely configurable user interface (keys and visual items) as part of Total

Room Automation

•Energy efficiency function ("Green Leaf ")

•Room temperature measurement

•Display of room temperature, control mode, scenes etc. (LCD)

•Backlit display, white or blue selection

•KNX PL-Link interface to the room automation station with plug & play

functionality

•Can be combined with different standard and design bezels

CM2N1601en_04

2016-03-24

Building Technologies

Use

The QMX3.P36... room operator unit is used as part of Desigo room automation to

measure the room temperature as well as to operate the room functions. The room

automation station determines the functions of both LCD display and keys.

The room operator unit can be used together with the Desigo TRA room

automation stations.

Type summary, ordering

The following items are supplied in the package:

Item

QMX3.P36F

QMX3.P36G

Operator unit

Bezel, titanium white Siemens DELTA-line Similar to Delta azio

120 x 80 mm

Base plate

CEE/VDE (type A)

3 modules landscape

In plastic bag for handover

to electrical installer

KNX PL-Link plug

Compatibility

•The QMX3.P36... room operator unit can be used with the Desigo TRA room

automation stations.

•Supported bezel programs

Siemens DELTA: DELTA line, DELTA miro and DELTA vita.

(For the DELTA style and DELTA profil series an adapter frame for

55mm x 55mm inserts is required)

Berker:(B.1, B.7

Gira:Standard 55, E2, Event, Esprit

Jung: A500, AS500, stainless steel; LS990, aluminum

Merten: System M

Feller:EDIZIOdue, PRESTIGE

(Adapter frame for 55mm x 55mm devices is required)

•Bezels from various other manufacturers can also be used (suitability must be

clarified in advance).

Product number

Stock number

Designation

Room

operator

unit

QMX3.P36F

S55624-H100

Freely configurable flush-mounted room operator unit for

KNX PL-Link

with

square

white bezel CEE/VDE (type A)

QMX3.P36G

S55624-H101

Freely configurable flush-mounted room operator unit for

KNX PL-Link

with

landscape

white bezel (3 modules landscape )

2 / 14

Siemens QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link CM2N1601en_04

Building Technologies 2016-03-24

Mechanical design

•The unit is designed for mounting in a conduit box (A)

– Square CEE/VDE (type A)

– Rectangular 3 modules landscape

(suitability to be clarified in advance).

•The base plate (B) (rectangular or landscape) contains:

– A hook to attach a securing strap to protect against tampering

(the strap is not provided)

– an earthing plate (quick slide connector) to connect an earthing cable

•One Bezel (C) is supplied:

– Siemens DELTA line (square, with the QMX3.P36F)

– Siemens similar to DELTA azio 120 x 180

(rectangular, with the QMX3.P36G)

Bezels from various other manufacturers can also be used

(suitability to be clarified in advance).

•The operator unit (D) incorporates the room temperature sensor element, keys,

LCD panel, KNX PL-Link plug, tool plug, and spring clamps to hold the operator

unit in the base plate.

Disposal

The device is considered an electronics device for disposal in terms of European

Directive 2012/19/EU and may not be disposed of as domestic garbage.

•Dispose of the device through channels provided for this purpose.

•Comply with all local and currently applicable laws and regulations.

3 / 14

Siemens QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link CM2N1601en_04

Building Technologies 2016-03-24

Engineering notes

•The room operator units offer plug & play functionality.

•The room operator units receive their power from the connected room

automation station via the KNX PL-Link interface.

•KNX PL-Link supports plug & play functionality for pre-configured devices out of

the library

•For KNX PL-Link wiring (topology, allowed cables and cable length), see the

Desigo installation guide, CM111043.

•Normally, electrical installers only install the base plate and the KNX PL-Link

plug. These two items are packed in a plastic bag for easy handover to

installers.

•Use the tear-off label with the barcode on the packaging / on the display and

stick it on the floor plan to prepare commissioning for several room operator

units per room automation station.

The same barcode label with unique identifier is available on the device.

Furthermore, the unique identifier (HEX number) is displayed on screen when

starting the device.

Mounting and installation

•The room operator unit is suitable for flush mounting.

•Recommended height: 1.50 m above floor.

•Do not mount the unit in recesses, shelves, behind curtains or doors, or above

or near heat sources.

•Avoid direct solar radiation and drafts.

•Seal the conduit box internally, as air currents in the conduit can affect sensor

readings.

•Adhere to allowed ambient conditions.

Location

4 / 14

Siemens QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link CM2N1601en_04

Building Technologies 2016-03-24

•The base plate contains:

– A hook to attach a securing strap to protect against tampering

(the strap is not provided)

– An earthing plate (quick slide connector) to connect an earthing cable

•The installing tube must be sealed or cold or warm air may enter the conduit box

and cause faulty temperature readings by the internal sensor.

•Mounting instructions are printed inside the device package and are also on the

plastic bag.

The operator unit may need to be dismounted from the base plate to exchange the

operator unit.

1. Hold bezel with one hand.

2. Pull operator unit with the other hand.

Mounting

Dismounting

5 / 14

Siemens QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link CM2N1601en_04

Building Technologies 2016-03-24

•For KNX PL-Link wiring (topology, allowed cables and cable length), see the

Desigo TRA installation guide, CM111043.

•Use the correct cables for the KNX PL-Link bus

•Do not interchange the wires of the KNX PL-Link cable.

– The red terminal is for KNX PL-Link +

– The gray terminal is for KNX PL-Link –

•Observe all local installation regulations.

•Use the earthing plate (quick slide connector) to connect an earthing cable in the

conduit box (in case a switch or a mains plug is in the same conduit box).

STOP

Caution

•The unit is not protected against accidental connection to AC 230 V.

•The installing tube must be sealed or cold or hot air may enter the conduit box

and cause faulty temperature readings by the internal sensor.

Prerequisite for commissioning

The room automation station must be running and an application must be loaded.

The application is not loaded on the room operator unit, but the room automation

station.

Download of the application is done using the SSA-DNT (Pack & Go) or the ABT.

For this purpose (or for service), connect the ABT to the room automation station

(USB or Ethernet).

Manual commissioning

All commissioning work is done via the PXC3... room automation station, using the

SSA-DNT or the ABT.

The ABT is never connected directly to a room operator unit.

When more than one QXM3.P36... room operator unit is on the same trunk of

the KNX PL-Link bus, manually commission is done as follows:

1. Connect the SSA-DNT or the ABT to the room automation station and

activate the online commissioning function.

2. Load the web page "KNX PL-Link identification".

Activate the identification function.

The room automation station now waits for a signal from the room operator

unit.

3. On the room operator unit, simultaneously press the upper left and bottom

right button for at least 5 seconds.

4. The page "System info" is displayed.

Go to the network function page (last line)

5. Press "Prog. Mode" (first line).

The display below "Prog. Mode" changes to "Enabled".

The tool identifies the current room operator unit that is operated and

assigns it.

After the device is commissioned, programming mode is automatically reset to

“disabled”. Note: Programming mode also resets to “disabled” each time the

device restarts.

Installation

Load application on the

room automation

station

6 / 14

Siemens QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link CM2N1601en_04

Building Technologies 2016-03-24

Diagnostics Press "Conn. Test" to test the KNX PL-Link connection.

A popup window shows the progress of the connection test:

Reset to factory

setting

STOP

Note! This operation resets all user preference data and

configuration settings to factory default.

This operation is irreversible.

Press "Fact. Reset". The device is locked and reboots within 10 seconds. The

room automation station deletes it from its device list. During this time, it is

safe to remove the device from the network.

If the room operator unit is not unplugged, it acts like a newly inserted device

requiring again automated or manual configuration.

Commissioning (plug & play)

When only one room operator unit is connected to the KNX PL-Link bus, the unit

automatically establishes communications with the room automation station, from

where the functions are downloaded to the room operator unit (plug & play).

The following routine is executed:

Step

Function

Description

Splash screen

The unique serial number of the device is displayed below the company

logo.

2 Busy

During configuration, 6 animated dots appear in the center of the screen

to indicate the device is busy.

This step is skipped if the device is already configured.

Note: The configuration file can be downloaded any time; as a result,

these dots are displayed every time the room automation station

initializes download.

7 / 14

Siemens QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link CM2N1601en_04

Building Technologies 2016-03-24

Step

Function

Description

3 Normal operation

After startup, the device goes to normal operation

(example view; picture depends on application in room automation

station).

Configuration required

When configuration is faulty, the default page

"Initial Menu" is displayed: temperature that is

measured by the local temperature sensor along

with a menu for network commissioning and

diagnostics.

Operating notes

Operation and display of the room operator unit depend on the control program on

the room automation station.

The display has 4 lines to display information.

Texts, icons, read-only data point information, or operable data point information

can be displayed.

With a multi-page navigation-driven page set, the information usually is laid out in

the following format:

Line 1

Title/read-only data point information

Line 2 Information

Operable data point information (display or setpoint)

Temperature, air quality, fan speed, etc.

Line 3

Read-only / operable data point information

Line 4

Information or navigation between several "pages"

Info

Operable

Read-only

Navigation

Info

Operable

Navigation

Info

Operable

Navigation

3 lines of information

List operation

Single-line operation

Usability concept

Multi-page display

with navigation

8 / 14

Siemens QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link CM2N1601en_04

Building Technologies 2016-03-24

With a single-page page set, information is usually is laid out in the following

format:

Line 1

Title / read-only data point information

Line 2 Operable data point information

Temperature, air quality, fan speed, etc.

Line 3

Read-only/operable data point information

Line 4

Read-only/operable data point information

Example:

Title (empty), temperature setpoint, fan speed and room

operating mode

The leaf symbol / (green, red) at the top right of the

device tells the user if the settings are energy-efficient or not.

Pressing the upper right key resets the application to energy-

efficient parameter values



Save a changed scene by long pressing the key (approx. 3 sec).

Notes

•A scene can only be saved if Scene Teaching is

enabled in the application.

•The key event to save a scene can be freely

engineered.

In the default page set, it is set to “long-press key

6" (the keys are numbered left top to bottom and

then right top to bottom).

•Lock the buttons:

Press button 6 6

•Unlock the buttons:

Press buttons 2, 3 and 7 one after the other

Single-page display

RoomOptiControl,

Green Leaf

Saving scenes

Key lock

9 / 14

Siemens QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link CM2N1601en_04

Building Technologies 2016-03-24

A list item provides status information:

•Tick: Indicates the current selection from the room automation station. A change

from hourglass to tick indicates that the automation station has confirmed the

modifications the user just made.

•Hourglass: Indicates the progress of the selected activity.

•Lock: Indicates locked entries that cannot be selected / enabled.

•Floppy disk: Is only used in scene saving, and will be displayed for 1 second,

then go back to "Tick".

Maintenance

The device can be cleaned with off-the shelf, solvent-free cleaning agents.

Do not use mechanical aids (rough sponge or similar materials) – only a soft, damp

cloth.

Dismounting: see page 5.

Technical data

Supply voltage

Operating voltage range

KNX PL-Link DC 21...30 V

The

room operator unit receives its power from the connected room automation station

via the KNX PL-Link interface

Power consumption

(from room automation station)

Max.10 mA at DC 24 V

Series A: Max.12.5 mA at DC 24 V

Operating data

Temperature sensor

Measuring element

NTC resistance sensor

Measuring range

0...50 °C

Measuring accuracy (5 … 30 °C)

±0.61 K

Measuring accuracy (25 °C)

±0.35 K

Display

Type

Dot matrix LCD, resolution 96 x 128

Information displayed depend

s on the

application in the

PXC3... room automation

station

−Room temperature

−

Setpoint adjustment

−

Control mode

−

Manually selected fan speed

−

Control sequence

−

Scenes

−etc.

Ports/interfaces

Type of port between

room automation station

and room operator unit

KNX

PL-Link

Baud rate

9.6 kbps

Standard KNX

plug

Wire diameter0.8 mm

, max. 1.0 mm

(solid conductors only)

Cable type

Solid conductors 2-core, twisted pair

Single cable length (from

room automation

station to room operator unit)

<1000 m

Cables must comply with KNX specifications, see TRA Installation manual, CM111043

Housing protection

Protection standard as per EN 60529

IP 30

Protection class

Insulation protection class

III

Status information

STOP

Note!

10 / 14

Siemens QMX3... Freely configurable flush-mounted room operator unit for KNX PL-Link CM2N1601en_04

Building Technologies 2016-03-24

This manual suits for next models

Other Siemens Controllers manuals

Siemens

Siemens SIMATIC HMI TP700 Comfort User manual

Siemens

Siemens SIRIUS 3RW30 User manual

Siemens

Siemens SINUMERIK 840D Operating instructions

Siemens

Siemens SIPART DR24 User manual

Siemens

Siemens OZS164 series User manual

Siemens

Siemens MT Series Owner's manual

Siemens

Siemens GXD 31.1 Series User manual

Siemens

Siemens SIMATIC ET 200SP User manual

Siemens

Siemens instabus JB520C23 User manual

Siemens

Siemens ST950ELV User manual

Siemens

Siemens SIMATIC S5 CPU Direct Driver User manual

Siemens

Siemens SINAMICS S120 User manual

Siemens

Siemens SINUMERIK 810D Instruction sheet

Siemens

Siemens RWD62 User manual

Siemens

Siemens Acvatix SAX61 MO Series Operator's manual

Siemens

Siemens SIRIUS ET 200S User manual

Siemens

Siemens S7-1200 TELECONTROL User manual

Siemens

Siemens RVL481 User manual

Siemens

Siemens SQK34.00S User manual

Siemens

Siemens REV23.03RF User manual

Siemens

Siemens GEB-1E Series User manual

Siemens

Siemens SINUMERIK 840D sl Parts list manual

Siemens

Siemens SIMOTION D410 Quick start guide

Siemens

Siemens SIMATIC S7-200 Release note

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide