Siemens CP-8000 User manual

DC8-037-2.02 Unrestricted

SICAM A8000 Series

CP-8000, CP-8021, CP-8022

User Manual

Preface

Open Source Software

Table of Contents

General Information

System Overview

Function Packages

Ambient Conditions

System Components and Technical Data

Installation and Circuitry

Preparing the Engineering

Engineering via SICAM TOOLBOX II

Engineering via SICAM WEB

Engineering via SICAM Device Manager

Service

Order Information

Examples for Instruction Lists

Error Handling

Set Up Dial-Up Connection on

Engineering

Use Cases

Glossary

Unrestricted

Siemens AG Order No.: DC8-037-2.02

Energy Automation

Humboldtstraße 59

90459 Nürnberg

Deutschland

Note

Please take notice of the notes and warnings for your safety in the preface.

Disclaimer of Liability

Although we have carefully checked the contents of this publication

for conformity with

the hardware and software described, we cannot

guarantee complete conformity since errors cannot be excluded.

The information provided in this manual is checked at regular

intervals and any corrections that might become necessary are

included in the next

releases. Any suggestions for improvement are

welcome.

Subject to change without prior notice.

Document Label: SIC8000-HBCP802xCP8000-ENG_V2.02

Release Date: 2017-10-05

The reproduction, transmission or use of this document or its

contents is not permitted without express written authority. Of-

fenders will be liable for damages. All rights, including rights

created by patent grant or registration of a utility model or design,

are reserved.

SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual Unrestricted 3

DC8-037-2.02, Edition 10.2017

Preface

Purpose of this manual

This manual describes the characteristics and functions of the following products:

•CP-8000

•CP-8021

•CP-8022 (GPRS)

Particularly it contains the following information:

•Safety instructions

•Fields of application and advantages of the system

•Configuration possibilities

•Functional overviews

•Technical specifications

•Order information

•Installation instructions

•Hardware descriptions (modules)

•Engineering options

•Parameterization of telecontrol applications

•Programming of open-/closed-loop control functions

•Saving and loading of application data

•Test functions

•Loading of firmware

•Diagnosis

Target Group

The document you are reading right now is addressed to users, who are in charge of the fol-

lowing engineering tasks:

•Evaluation of the suitability of the system

•Evaluation of the module specifications

•Evaluation of quotation criteria, such as technical specifications of the system or environ-

mental conditions

•Conceptual activities, such as design and configuration

•Mechanical installation

•Creation of the assembly technical documentation

•Engineering and testing with the designated engineering tools

•Technical system maintenance and service, module handling

Within this manual there are hints how to obtain information or files by means of the website

http://www.siemens.com/sicam. If you have no access please consult your project manager at

Siemens.

Preface

4Unrestricted SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual

DC8-037-2.02, Edition 10.2017

Recommendations for Third-party Products

Siemens does neither receive liability nor warranty for recommendations which are given or

implied by this manual. For the correct and intended use of the respective product the associ-

ated technical descriptions must be paid attention to in any case.

Links to Third-Party Websites

Siemens is not responsible for the contents of third-party websites mentioned in this docu-

ment, as well as the correctness of the publications and links. For all product information the

respective manufacturer is responsible.

Conventions Used

•Manuals to be referred to are represented in italics, such as for instance SICAM RTUs

Common Functions Protocol Elements, chapter "Dial-Up Traffic (DIA)".

•Outputs visible on the screen are described in this font.

•Inputs via keyboard or mouse keys and visible on the screen are described in this

font.

•Menu positions visible on the screen are described in this font.

•Unchangeable texts that are contained in windows and are visible on the screen ARE

DESCRIBED IN THIS FONT.

•Buttons in windows visible on the screen and to be operated by keyboard or mouse

are described in this font.

•Operation code from programs and variable names are described in this font.

•Path statements in the directory tree, which lead to parameters, are described in this

font.

•Names of parameters are described in this font.

•Names of values are described in this font.

•Symbolic names, program names and file name extensions are described in this font.

Note

Within this manual described functions for operation, diagnosis and test of CP-8000/CP-802xhave been

recorded by means of an industrial PC with operating system Microsoft Windows 7 Enterprise ® (Service

Pack 1) [64 bit] and web browser Microsoft Internet Explorer ® 10. They are valid likewise –

sometimes with

inessential deviations – for other operating systems and web browsers.

Preface

SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual Unrestricted 5

DC8-037-2.02, Edition 10.2017

Placement into the Information Landscape

Document name Item number

SICAM RTUs IEC 60870-5-101/104 Interoperability DC0-013-2

SICAM RTUs IEC 60870-5-103 Interoperability DC0-026-2

SICAM RTUs TG800 Interoperability DC0-041-2

SICAM RTUs DNP3 Interoperability DC0-046-2

SICAM RTUs MODBUS Interoperability DC0-073-2

Data Sheet CM-0819 MC0-043-2

Data Sheet CM-0821 MC0-031-2

Data Sheet CM-0822 MC0-033-2

Data Sheet CM-0823 MC0-035-2

Data Sheet CM-0827 MA0-025-2

SICAM TM System Data Sheet MC6-007-2

SICAM TM I/O Modules Manual DC6-041-2

SICAM I/O Modules Manual DC8-012-2

SICAM RTUs Common Functions Peripheral Elements According to

IEC 60870-5-101/104 DC0-011-2

SICAM RTUs Common Functions System and Basic System Elements DC0-015-2

SICAM RTUs • Ax 1703 Common Functions Protocol Elements DC0-023-2

SICAM RTUs Common Functions MODBUS DC0-088-2

SICAM RTUs Common Functions DNP3 DC0-090-2

SICAM RTUs Common Functions Printer Logging (ASCII) and SMS Alarms DC0-096-2

SICAM RTUs Common Functions Landis & Gyr TELEGYR 800 GV-S DC0-103-2

SICAM RTUs Common Functions ABB RP5UT1 MPT-S DC0-105-2

SICAM RTUs • SICAM TOOLBOX II Administrator Security Manual DC0-115-2

Folder SICAM TOOLBOX II M30-001-5

SICAM TOOLBOX II License Catalog D30-017-5

SICAM TOOLBOX II Online Help *)

CAEx plus Online Help *)

SICAM Device Manager Product Information D51-001

SICAM Device Manager User Manual D51-003

PC Products Reference List D95-003-1

*) available in the engineering system SICAM TOOLBOX II

Preface

6Unrestricted SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual

DC8-037-2.02, Edition 10.2017

Further Support

For more information, please contact our Customer Support Center:

Phone: +49 (0)180 524 70 00

Fax: +49 (0)180 524 24 71

(charges depending on provider)

e-mail: support.ene[email protected]

The Siemens Power Academy offers a comprehensive program of professional training events

in the fields of power generation, distribution and transmission.

Main training centers are:

Nuremberg, Germany (Head Office)

Phone: +49 911 433 7415

Fax: +49 911 433 5482

power-academy.ptd@siemens.com

Vienna, Austria

Phone: +43 51707 31143

Fax: +43 51707 55243

power-academy.at@siemens.com

Schenectady, NY, USA

Phone: +1 518 395 5005

Fax: +1 518 346 2777

pti-edpro.ptd@siemens.com

Hebburn, United Kingdom

Phone: +44 1914 953449

Fax: +44 1914 953693

pti-training.stdl.uk@siemens.com

Notes on Safety

This manual does not constitute a complete catalog of all safety measures required for operat-

ing the equipment (module, device) in question because special operating conditions might

require additional measures. However, it does contain notes that must be adhered to for your

own personal safety and to avoid damage to property. These notes are highlighted with a

warning triangle and different keywords indicating different degrees of danger.

Danger

means that death, serious bodily injury or considerable property damage will occur, if the appropriate

precautionary measures are not carried out.

Warning

means that death, serious bodily injury or considerable property damage can occur, if the appropriate

precautionary measures are not carried out.

Caution

means that minor bodily injury or property damage could occur, if the appropriate precautionary measures

are not carried out.

Note

is important information about the product, the handling of the product or the respective part of the docu-

mentation, to which special attention is to be given.

Preface

SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual Unrestricted 7

DC8-037-2.02, Edition 10.2017

Qualified Electrical Engineering Personnel

Qualified electrical engineering personnel may commission and operate the device described

in this document. Qualified electrical engineering personnel in the sense of this document are

people who can demonstrate up to date technical qualifications as electrical technicians in-

cluding safety and first aid training. These person may commission, isolate, ground and label

devices, systems and circuits according to the standards of safety engineering.

Use as Prescribed

The device may only be used for such applications as set out in the catalogs and the technical

description, and only in combination with third-party equipment recommended and approved

by Siemens.

Correct and safe operation of the product requires adequate transportation, storage, installa-

tion and mounting in a control cabinet, as well as appropriate use and maintenance.

During operation of electrical equipment, it is unavoidable that certain parts of this equipment

will carry dangerous voltages. Severe injury or damage to property can occur if the appropri-

ate measures are not taken:

•Before making any connections, ground the equipment and the grounding terminal.

•Hazardous voltages can be present on all switching components connected to the power

supply.

•The device does not represent a safety-oriented application.

•Even after the supply voltage has been disconnected, hazardous voltages can still be pre-

sent in the equipment (capacitor storage).

•LED display does not ensure that the connectors are free of voltage.

•The limit values indicated in the manual must not be exceeded; that also applies to testing

and commissioning.

Danger

Consider obligatory the safety rules for the accomplishment of works at electrical plants:

1. Switch off electricity all-pole and on all sides!

2. Ensure that electricity cannot be switched on again!

3. Double check that no electrical current is flowing!

4. Discharge, ground, short circuit!

5. Cover or otherwise isolate components that are still electrically active!

Preface

8Unrestricted SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual

DC8-037-2.02, Edition 10.2017

Information on Conformity

The product described conforms to the regulations of the following European Directives:

•2014/30/EU

Directive of the European Parliament and of the Council of 26 February 2014 on the harmonization of

the laws of the Member States relating to electromagnetic compatibility; Official Journal of the EU L96,

29/03/2014, p. 79–106

•2014/35/EU

Directive of the European Parliament and of the Council of 26 February 2014 on the harmonization of

the laws of the Member States relating to the making available on the market of electrical equipment

designed for use within certain voltage limits; Official Journal of the EU L96, 29/03/2014, p. 357–374

•2014/53/EU (applies for CP-8022)

Directive of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the

laws of the Member States relating to the making available on the market of radio equipment and repeal-

ing Directive 1999/5/EC; Official Journal of the EC L153, 22/05/2014, p. 62–106

•2011/65/EU

Directive of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of

certain hazardous substances in electrical and electronic equipment; Official Journal of the EU L174,

01/07/2011, p. 88–110

The conformity of the product with the regulations of the above mentioned directives is proven through the

observance of the following harmonized standards:

•EN 60870-2-1:1996 for 2014/30/EU

•EN 61010-1:2010 for 2014/35/EU

•EN 301489-1:2011 and EN 301511:2003 for 2014/53/EU

•EN 50581:2012 for 2011/65/EU

This declaration certifies the conformity with the specified directives, but is not an assurance of character-

istics in the sense of the product liability law.

The product is intended exclusively for use in an industrial environment.

Maintenance, Cleaning and Disposal

•Maintenance

─The device is maintenance-free.

─With handling on the bus – or its vicinity – a sufficient ESD protection must be consid-

ered.

•Cleaning

─If necessary, wish the device with a clean, dry, soft and fluff-freecotton cloth.

─Detergents may cause damage. Do not use a detergent.

─Humidity and wetness may impair the functionality of the components. Make sure that

humidity or wetness does not enter into the device.

•Disposal

─For the disposal of the device it is necessary to observe the local and national direc-

tives.

SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual Unrestricted 9

DC8-037-2.02, Edition 10.2017

Open Source Software

This product contains, among other things, Open Source Software developed by third parties.

The Open Source Software used in this product and the license agreements concerning this

software can be found in the Readme_OSS. These Open Source Software files are protected

by copyright.

Your compliance with those license conditions will entitle you to use the Open Source Soft-

ware as foreseen in the relevant license. In the event of conflicts between Siemens license

conditions and the Open Source Software license conditions, the Open Source Software con-

ditions shall prevail with respect to the Open Source Software portions of the software. The

Open Source Software is licensed royalty-free.

Insofar as the applicable Open Source Software License Conditions provide for it you can or-

der the source code of the Open Source Software from your Siemens sales contact - against

payment of the shipping and handling charges - for a period of at least 3 years since purchase

of the Product.

We are liable for this product including the Open Source Software contained in it pursuant to

the license conditions applicable to the Product. Any liability for the Open Source Software

beyond the program flow intended for this product is explicitly excluded. Furthermore any lia-

bility for defects resulting from modifications to the Open Source Software by you or third par-

ties is excluded. We do not provide any technical support for this Product if it has been modi-

fied.

The Open Source Software used in this product and the license agreements concerning this

software can be found on the SICAM RTUs SD card in the file ReadmOSS.htm.

Path for Readme_OSS: SD card:\OSS\<Firmwarenumber>\<Revision>\ReadmOSS.htm

(e.g.: SD card:\OSS\CPC80\01.01\ReadmOSS.htm).

You need a SD card reader and a webbrowser to read the htm file.

Open Source Software

10 Unrestricted SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual

DC8-037-2.02, Edition 10.2017

Other manuals for CP-8000

This manual suits for next models

Table of contents

Other Siemens Controllers manuals

Siemens

Siemens QPA84 User manual

Siemens

Siemens GPC 1A Series User manual

Siemens

Siemens 3VA9677-0EK11 User manual

Siemens

Siemens SIMATIC S7-200 User manual

Siemens

Siemens LMV60.110A2 User manual

Siemens

Siemens SIMATIC S7-1200 User manual

Siemens

Siemens SITRANS VP300 User manual

Siemens

Siemens SIMODRIVE 611 universal Parts list manual

Siemens

Siemens SIMATIC S7-1200 User guide

Siemens

Siemens SSD81U Owner's manual

Siemens

Siemens Flowrite 599 Series Owner's manual

Siemens

Siemens Simatic S7-1500 User manual

Siemens

Siemens Simatic S7-1500 User guide

Siemens

Siemens SITRANS LUT400 User manual

Siemens

Siemens SIPROTEC 5 Instruction manual

Siemens

Siemens GGA Series User manual

Siemens

Siemens instabus Series User manual

Siemens

Siemens OpenAir GIB13.1 Series User manual

Siemens

Siemens LMV51 Series Operator's manual

Siemens

Siemens Simatic S7-300 Assembly Instructions

Siemens

Siemens MT Series Owner's manual

Siemens

Siemens simovert masterdrives User manual

Siemens

Siemens RWD32S User manual

Siemens

Siemens Synco 200 User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide