Siemens CP 1612 A2 User manual

CP 1612 A2

___________________

SIMATIC NET

PG/PC - Industrial Ethernet

CP 1612 A2

Operating Instructions

08/2016

C79000

-G8976-C302-02

Preface

Description of the device

Software installation

Hardware installation

Configuration

Technical specifications

Approvals

Siemens AG

Division Process Industries and Drives

Postfa

ch 48 48

90026 NÜRNBERG

GERMANY

Document order number: C79000-G8976-C302

Ⓟ

09/2016 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified

for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

CP 1612 A2

Operating Instructions, 08/2016, C79000-G8976-C302-02 3

Table of contents

1 Preface ................................................................................................................................................... 5

2 Description of the device......................................................................................................................... 9

3 Software installation.............................................................................................................................. 11

3.1 Installing the driver..................................................................................................................11

3.2 Uninstalling the driver .............................................................................................................11

3.3 Installing the "SIMATIC NET PC Software" ............................................................................11

3.4 Uninstalling the "SIMATIC NET PC Software"........................................................................12

4 Hardware installation............................................................................................................................. 13

4.1 Installing and connecting up ...................................................................................................13

5 Configuration ........................................................................................................................................ 15

6 Technical specifications ........................................................................................................................ 17

A Approvals.............................................................................................................................................. 19

Table of contents

CP 1612 A2

4Operating Instructions, 08/2016, C79000-G8976-C302-02

CP 1612 A2

Operating Instructions, 08/2016, C79000-G8976-C302-02 5

Preface

Validity of this documentation

These operating instructions are valid for the following product:

●CP 1612 A2

Article number: 6GK1161-2AA01

Content of this documentation

These operating instructions contain information about the installation and configuration of

the CP 1612 A2 communications processor.

Updated operating instructions on the Internet

You will find the current version of these operating instructions on the Product Support pages

under the following entry ID:

62611945 (https://support.industry.siemens.com/cs/ww/en/view/62611945)

Further documentation

The documents listed below contain more detailed information on commissioning and using

the communications processor.

Enter the entry ID shown below of the relevant manual as the search item.

●

Configuration manual Commissioning PC Stations

This provides you with detailed information on commissioning and configuring SIMATIC

NET PC communications modules.

Entry ID:

109488960 (https://support.industry.siemens.com/cs/ww/en/view/109488960)

●

SIMATIC NET - Industrial Communication with PG/PC

–

Volume 1 – Basics (system manual)

Entry ID:

77376110 (https://support.industry.siemens.com/cs/ww/en/view/77376110)

–

Volume 2 – Interfaces (programming manual)

Entry ID:

77378184 (https://support.industry.siemens.com/cs/ww/en/view/77378184)

The system manuals introduce the topic of industrial communication and explain the

communications protocols used. There is also a description of the OPC interface as

user programming interface.

Preface

CP 1612 A2

6Operating Instructions, 08/2016, C79000-G8976-C302-02

●

Installation manual SIMATIC NET PC Software

This document contains detailed information on installing the "SIMATIC NET

PC Software".

Entry ID:

77377602 (https://support.industry.siemens.com/cs/ww/en/view/77377602)

●

System manual Industrial Ethernet Network Manual

In this document you will find detailed information about setting up an Industrial Ethernet

network.

Entry ID:

27069465 (https://support.industry.siemens.com/cs/ww/en/view/27069465)

SIMATIC NET documentation

You will find the entire SIMATIC NET documentation on the Product Support pages:

15247 (https://support.industry.siemens.com/cs/ww/en/ps/15247)

Go to the required product group and make the following settings:

→Filter criteria for entries →entry type "Manual"

See also

Support (https://support.industry.siemens.com/cs/ww/en/ps)

Trademarks

The following and possibly other names not identified by the registered trademark sign ® are

registered trademarks of Siemens AG:

SIMATIC NET, HARDNET, SOFTNET, CP 1612, CP 1613, CP 5612, CP 5613, CP 5614,

CP 5622

Industry Online Support

In addition to the product documentation, the comprehensive online information platform of

Siemens Industry Online Support at the following Internet address:

(http://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo2&aktprim=99&lang=

en)

Apart from news, there you will also find:

●Project information: Manuals, FAQs, downloads, application examples etc.

●Contacts, Technical Forum

Preface

CP 1612 A2

Operating Instructions, 08/2016, C79000-G8976-C302-02 7

●The option submitting a support query:

(https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&lang=en&objid

=38718979&caller=view)

●Our service offer:

Right across our products and systems, we provide numerous services that support you

in every phase of the life of your machine or system - from planning and implementation

to commissioning, through to maintenance and modernization.

You will find contact data on the Internet at the following address:

(http://www.automation.siemens.com/partner/guiwelcome.asp?lang=en)

SITRAIN - Training for Industry

The training offer includes more than 300 courses on basic topics, extended knowledge and

special knowledge as well as advanced training for individual sectors - available at more

than 130 locations. Courses can also be organized individually and held locally at your

location.

You will find detailed information on the training curriculum and how to contact our customer

consultants at the following Internet address:

(www.siemens.com/sitrain)

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions only form one element of such a concept.

Customer is responsible to prevent unauthorized access to its plants, systems, machines

and networks. Systems, machines and components should only be connected to the

enterprise network or the internet if and to the extent necessary and with appropriate security

measures (e.g. use of firewalls and network segmentation) in place.

Additionally, Siemens’ guidance on appropriate security measures should be taken into

account. For more information about industrial security, please visit

http://www.siemens.com/industrialsecurity

Siemens’ products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends to apply product updates as soon as available and to

always use the latest product versions. Use of product versions that are no longer supported,

and failure to apply latest updates may increase customer’s exposure to cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed under

https://support.industry.siemens.com/cs/ww/de/ps/15247/pm

Preface

CP 1612 A2

8Operating Instructions, 08/2016, C79000-G8976-C302-02

SIMATIC NET glossary

Explanations of many of the specialist terms used in this documentation can be found in the

SIMATIC NET glossary.

You will find the SIMATIC NET glossary on the Internet at the following address:

50305045 (http://support.automation.siemens.com/WW/view/en/50305045)

CP 1612 A2

Operating Instructions, 08/2016, C79000-G8976-C302-02 9

Description of the device

Product features

The CP 1612 A2 is a PCI module for connecting PGs/PCs to Industrial Ethernet. The

essential properties are as follows:

●RJ-45 connector for Industrial Ethernet for connecting a twisted-pair cable

●Data rates 10/100/1000 Mbps (half/full duplex) are supported

●Autosensing and autonegotiation

Hardware requirement

The CP 1612 A2 requires a PCI slot to operate.

LED display

To indicate module activity, the CP 1612 A2 has four LEDs on its front panel. The

assignment is as follows:

1000 Mbps

10 Mbps

100 Mbps

FDX (full duplex)

Description of the device

CP 1612 A2

10 Operating Instructions, 08/2016, C79000-G8976-C302-02

Other manuals for CP 1612 A2

This manual suits for next models

Table of contents

Other Siemens Controllers manuals

Siemens

Siemens Albatros2 RVA78.690 User manual

Siemens

Siemens SIRIUS S2 User manual

Siemens

Siemens GMA 9E Series User manual

Siemens

Siemens OpenAir GMA 1 Series User manual

Siemens

Siemens SIMATIC S7 User manual

Siemens

Siemens SINAMICS S120 Technical Document

Siemens

Siemens SSC Series User manual

Siemens

Siemens SINUMERIK 840D sl User manual

Siemens

Siemens Flowrite 599 Series User manual

Siemens

Siemens RRV851 User manual

Siemens

Siemens SIMATIC EM 300 User manual

Siemens

Siemens ST950 User manual

Siemens

Siemens RVL481 User manual

Siemens

Siemens SIMATIC 500 User manual

Siemens

Siemens SINUMERIK ONE PPU 1740 Series Technical Document

Siemens

Siemens Simatic S7-300 User manual

Siemens

Siemens SIDS-T40026-00-4AUS User manual

Siemens

Siemens SINAMICS S120 User manual

Siemens

Siemens FC18 Series User manual

Siemens

Siemens OpenAir GDE Series Owner's manual

Siemens

Siemens Delta Series User manual

Siemens

Siemens SIRIUS M200D User manual

Siemens

Siemens 5WG1 536-1DB51 User manual

Siemens

Siemens OpenAir GIB13.1 Series User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide