Siemens Modem Block User manual

INTRODUCTION The SIEMENS Modem Block module is a component of the HUB-4 assembly. Each

Modem Block module provides 1 independent data channel.The HUB-4 can support

up to 4 independent data channels.The Modem Block module mounts on the HUB-4,

COM-2 board, which in turn mounts on the HUB -4 Main-2 board. Refer to the table

below to determine the required modules for the desired configuration.

TABLE 1

HUB-4 CONFIGURATION

Number of

Channels Required Modules

1 1 HUB-4 Main-2, 1 HUB-4 COM-2, 1 Modem Block

2 1 HUB-4 Main-2, 1 HUB-4 COM-2, 2 Modem Blocks

3 1 HUB-4 Main-2, 2 HUB-4 COM-2, 3 Modem Blocks

4 1 HUB-4 Main-2, 2 HUB-4 COM-2, 4 Modem Blocks

PRE-INSTALLATION The Modem Block module has three configuration jumpers: JP1, JP2, and JP3. Refer

to Figure 1 for the location of the jumpers. Set the jumpers to the configuration

shown in Table 2.

NOTE:

"ON" IS WHEN THE JUMPER

IS IN THE PROPER POSITION

OVER PLUGS JP1, JP2, OR JP3.

JP2 JP3

JP1

MODEM BLOCK

Figure 1

Module Block Module

Installation Instructions

Model Modem Block

Modem Block Module For HUB-4

Siemens Building Technologies

Fire Safety

P/N 315-099356-2

TABLE 2

MODEM BLOCK

JUMPER SETTINGS

JP1 ON

JP2 OFF

JP3 OFF

INSTALLATION

Disconnect BATTERY and AC prior to working on equipment.

Mounting Each Modem Block module mounts to a HUB-4, COM-2 with the 3 nylon spacers, 3

nylon screws, and 3 nylon washers provided. One HUB-4, COM-2 board can accom-

modate up to 2 Modem Block modules.

1. To begin mounting a Modem Block module on a HUB-4, COM-2 board,

place the screw end of the 3 spacers through the holes in the top of the

COM-2 board. (Refer to Figure 2.)

2. Secure the spacers in place on the underside of the HUB-4, COM-2 with

the 3 nylon nuts.

3. DO NOT place the Modem Block module on the HUB-4, COM-2 board at

this time. Reserve the 3 nylon screws provided.

4. Refer to the HUB -4 Installation Instructions, P/N 315-099458, to complete

the installation.

HOLES FOR

MOUNTING

NYLON SPACERS

HOLES FOR

MOUNTING

NYLON SPACERS

PLACE SCREW

END OF SPACER

THROUGH HOLE

IN HUB-4, COM-2

2X10PIN

RECEPTACLE

2X10PIN

RECEPTACLE

MOUNTS ONE

MODEM BLOCK

MODULE

MOUNTS ONE

MODEM BLOCK

MODULE

HUB-4,

COM-2

Figure 2

Placing Nylon Spacers For Modem Block Module On HUB-4, COM-2 Board

Siemens Building Technologies, Inc.

8 Fernwood Road

Florham Park, New Jersey 07932

Siemens Building Technologies, Ltd.

2 Kenview Boulevard

Brampton, Ontario L6T 5E4 CN P/N 315-099356-2

Table of contents

Other Siemens Control Unit manuals

Siemens

Siemens SINUMERIK 840D sl User manual

Siemens

Siemens SIM-16RC User manual

Siemens

Siemens RDM-MXL User manual

Siemens

Siemens 599-06611 Owner's manual

Siemens

Siemens COM060 User manual

Siemens

Siemens Flowrite 599 Series Owner's manual

Siemens

Siemens IM 155-6 PN ST User manual

Siemens

Siemens SIMATIC NET CP 5613 A2 User manual

Siemens

Siemens PSO 4000 User manual

Siemens

Siemens VKF46 Series User manual

Siemens

Siemens RC-30U User manual

Siemens

Siemens RCC-2/R User manual

Siemens

Siemens 2AO U HF User manual

Siemens

Siemens SIWAREX FTC Application guide

Siemens

Siemens PXC D Series User manual

Siemens

Siemens MICROMASTER 420 User manual

Siemens

Siemens SIMOTICS CONNECT 400 User manual

Siemens

Siemens PN16 User manual

Siemens

Siemens SIMOTION D410 PN User manual

Siemens

Siemens LAL Series User manual

Siemens

Siemens 3AH User manual

Siemens

Siemens SINUMERIK 880 Operating instructions

Siemens

Siemens 7SA513BB Series Operating and installation instructions

Siemens

Siemens SIRIUS PROFINET User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual