Siemens SINUMERIK 840C Setup guide

SINUMERIK 840C

SIMODRIVE 611-D

Diagnostics Guide 09.2001 Edition

User Documentation

Valid for

09.2001 Edition

SINUMERIK 840C

SIMODRIVE 611–D

DiagnosticsGuide

Alarms 1

Diagnostics on the PLC 2

Error Display on CPU 3

Errors with Function Macros 4

Parameterization Errors

Spindle/Axis 5

Control Drive

SINUMERIK 840C/CE

(Standard/Export version) SIMODRIVE 611–D

Software Version Software Version

1.x

2.x

3.x 1.x

4.x 2.x

5.x 3.x

6.x 4.x

6.4 5.x

SINUMERIKdocumentation

Printing history

Brief details of this edition and previous editions are listed below.

The status of each edition is shown by the code in the “Remarks”column.

Status code in the “Remarks” column:

ANew documentation.. . . .

BUnrevised reprint with new Order No.. . . .

CRevised edition with new status.. . . . If factual changes have been made on the page since the last edition, this is

indicated by a new edition coding in the header on that page.

Edition Order No. Remarks

09.95 6FC5198–5AB40–0BP0 A

04.96 6FC5198–5AB40–0BP1 C

08.96 6FC5198–5AB40–0BP2 C

07.97 6FC5198–6AB40–0BP0 C

01.99 6FC5198–6AB40–0BP1 C

09.01 6FC5198–6AB40–0BP2 C

This manual is included in the documentation on CD–ROM (DOCONCD)

Edition Order No. Remarks

11.01 6FC5 198–6CA00–0BG2 C

Trademarks

SIMATICR, SIMATIC HMIR, SIMATIC NETR, SIROTECR, SINUMERIKRand SIMODRIVERare trademarks

of Siemens AG. All other product and system names are registered trademarks of their respective

companies and must be treated accordingly.

For further informationvisit our Internet address:

http://www.ad.siemens.de/sinumerik

This publication was produced with Interleaf V 7

The reproduction, transmission or use of this document or its

contents is not permitted wihout express written authority. Offenders

will be liable for damages. All rights, including rights created by patent

grant or registration of a utility model or design, are reserved.

Other functions not decribed in this documentation might be

executable in the control. This does not, however, represent an

obligation to supply such functions with a new control or when

servicing.

We have checked that the contents of this document correspond to

the hardware and software described. Nonetheless, differences might

exist and therefore we cannot guarantee that they are completely

identical. The information contained in this document is, however,

reviewed regularly and any necessary changes will be included in the

next edition. We welcome suggestions for improvement.

Subject to change without prior notice.

Siemens–AktiengesellschaftOrder No. 6FC 5198–6AB40–0BP2

Printed in the Federal Republic of Germany

11/92

SINUMERIK 840C / SIMODRIVE 611–D (DA)

Preliminary notes

This Guide serves as a reference work. It allows the machine tool user:

Sto assess irregularities during operation at the machine correctly

Sto obtain information about the response of the system to the irregularity

Sto make use of the options for continuing operation after the irregularity

Scope This description lists the diagnostics options of the PLC and the alarms of the

MMC, NCK, servo and drive (SIMODRIVE 611–D) areas.

Sequence In the Diagnostics Guide the alarms are sorted in ascending order of alarm num-

bers. The numbers are not necessarily contiguous.

Safety

!Danger

Please assess the condition of your plant carefully against

the description of the alarm that has occurred. Eliminate

the cause of the alarm and acknowledge it as described.

If alarms are ignored, danger to the machine, workpiece,

stored settings, and in certain cases, to your health, could

result.

!Warning

This warning notice means that loss of life, severe personal

injury or substantial material damage can result if the

appropriate precautions are not taken.

!Caution

This warning notice (with warning triangle) means that

a minor personal injury can result if the appropriate pre-

cautions are not taken.

Caution

This warning notice (without warning triangle) means that a

material damage can result if the appropriate precautions

are not taken.

Notice

This warning notice means that an undesired event or an

undesired state can result if the appropriate notices are not

observed.

12/93

SINUMERIK 840C / SIMODRIVE 611–D (DA)

Contents

1 Alarms 1–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1 Alarm groups 1–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 Alarm numbers/cancellation of alarms 1–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3 Display of the alarms in the alarm line 1–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.4 Display of the alarms as dialog box 1–6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.5 Priority of alarms 1–8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.5.1 Alarm description 1–8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.6 Dialog text 1–223. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.6.1 Notes for the operator 1–223. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.6.2 Listing of dialog texts 1–223. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 Diagnostics on the PLC 2–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1 Error numbers (ACCU 3 high byte, DB 1 DW 160) 2–1. . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.2 Additional error information (ACCU 3 low byte, DB 1 DW 161–163) 2–7. . . . . . . . . . . . . .

3 Error Display on CPU 3–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 Errors with Function Macros 4–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 Parameterization Errors Spindle/Axis 5–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

04/96

SINUMERIK 840C / SIMODRIVE 611–D (DA)

1 Alarms

1.1 Alarm groups

NC alarms The alarms are divided into alarm groups.

SGeneral alarms

SComputer link alarms

SAxis-specific alarms

SSpindle-specific alarms

SChannel-specific alarms

At POWER ON RESET (switching on control), all

NC alarms are cancelled.

The CANCEL alarms can be deleted in the asso-

ciated operating area only.

PLC alarms

The PLC alarms are assigned error numbers

6000 to 9999. The alarm text, alarm action and

deletion conditions are configured by the ma-

chine manufacturer.

MMC alarms

MMC alarms do not interrupt an active NC

program. The alarms are acknowledged

automatically provided the correct sequence of

operations is adhered to or via softkeys.

1 Alarms

9.1.1 Alarmgruppen

04/96

1–2 SINUMERIK 840C / SIMODRIVE 611–D (DA)

1.2 Alarm numbers/cancellation of alarms

Alarm number Kind of alarm

1General alarms

2 to 15 General alarms

16 to 36 Computer link alarms

43 to 110 General alarms

1000 to 1211

1240 to 1251 Axis-specific alarms

1280 to 1371 Axis-specific alarms

1440 to 1971 Axis-specific alarms

2000 to 2193 General alarms

2250 to 2263 Spindle-specific alarms

2270 to 2273 Spindle-specific alarms

2280 to 2283 Spindle-specific alarms

3000 to 3220 General alarms

4000 to 4299

5000 to 5299 Cycle alarms

6000 to 9999 PLC error messages or PLC operational messages

10000 to 12031 Axis-specific alarms

20000 to 20309 Spindle-specific alarms

100000 to 169999 MMC alarms

200000 to 209999 PLC dialogs

210000 to 219999 Free area

300000 to 399999 611D alarms

1 Alarms

1.2 Alarmnumbers/cancellation of alarms

Other manuals for SINUMERIK 840C

This manual suits for next models

Table of contents

Other Siemens Control Unit manuals

Siemens

Siemens Siwarex U User manual

Siemens

Siemens SINAMICS G120 User manual

Siemens

Siemens SINAMICS G120P CU230P-2 Administrator guide

Siemens

Siemens CM 1243-5 User manual

Siemens

Siemens ASIsafe K45 F User manual

Siemens

Siemens SICAM FCG User manual

Siemens

Siemens LOGO! Series User manual

Siemens

Siemens SCALANCE S623 User manual

Siemens

Siemens VVI46 Series User manual

Siemens

Siemens LYC11 User manual

Siemens

Siemens SINAMICS G120 User manual

Siemens

Siemens SIMATIC ET 200SP User manual

Siemens

Siemens SIJECT 16i User manual

Siemens

Siemens SIRIUS 3SB3 User manual

Siemens

Siemens Flowrite 599 Series Owner's manual

Siemens

Siemens SIMATIC NET CP 1243-1 DNP3 Instruction sheet

Siemens

Siemens Flowrite 599 Series Owner's manual

Siemens

Siemens SINAMICS S120 Technical Document

Siemens

Siemens XC10 Series Guide

Siemens

Siemens SINAMICS SM120 User manual

Siemens

Siemens 3VL9800-3MJ00 User manual

Siemens

Siemens SINUMERIK 828D Turning Owner's manual

Siemens

Siemens 4AI I 4WIRE HART Manual

Siemens

Siemens simovert masterdrives User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual