Siemens CPU 412-5H Technical Document

Synchronization modules

Synchronization modules for

S7-400H

Equipment Manual

04/2020

A5E50072434-AA

Security information 1

Introduction 2

Safety notes 3

Description of the device 4

Assembling 5

Connecting up 6

Technical data 7

Approvals 8

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will be

used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property

damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified

personnel are those who, based on their training and experience, are capable of identifying risks and avoiding

potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended or

approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software described.

Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this

publication is reviewed regularly and any necessary corrections are included in subsequent editions.

Siemens AG

Digital Industries

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E50072434-AA

Ⓟ 04/2020 Subject to change

Table of contents

1 Security information......................................................................................................................................5

2 Introduction...................................................................................................................................................7

3 Safety notes..................................................................................................................................................9

4 Description of the device ............................................................................................................................11

4.1 Components of the product....................................................................................................11

4.2 Synchronization modules for S7–400H ..................................................................................11

5 Assembling .................................................................................................................................................15

5.1 Safety notices for installation .................................................................................................15

5.2 Selecting fiber-optic cables ....................................................................................................16

5.3 Notes on the installation of synchronization modules ............................................................21

5.4 Wiring and inserting the synchronization module...................................................................21

5.5 Removing the synchronization module ..................................................................................22

5.6 Installation of fiber-optic cables..............................................................................................22

6 Connecting up ............................................................................................................................................25

6.1 Safety when connecting up ....................................................................................................25

7 Technical data ............................................................................................................................................27

8 Approvals....................................................................................................................................................29

Tables

Table 5-1 Accessory fiber-optic cable .........................................................................................................16

Table 5-2 Specification of fiber-optic cables for indoor applications............................................................17

Table 5-3 Specification of fiber-optic cables for outdoor applications .........................................................19

Figures

Figure 4-1 Synchronization modules 6ES7960-1AA08-0XA0 and 6ES7960-1Ax06-0XA0 ..........................12

Figure 5-1 Fiber-optic cables, installation using distribution boxes ..............................................................20

Synchronization modules for S7-400H

Equipment Manual, 04/2020, A5E50072434-AA 3

Table of contents

Synchronization modules for S7-400H

4Equipment Manual, 04/2020, A5E50072434-AA

Security information 1

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be connected

to an enterprise network or the internet if and to the extent such a connection is necessary and

only when appropriate security measures (e.g. firewalls and/or network segmentation) are in

place.

For additional information on industrial security measures that may be implemented, please

visit

https://www.siemens.com/industrialsecurity.

Siemens’ products and solutions undergo continuous development to make them more secure.

Siemens strongly recommends that product updates are applied as soon as they are available

and that the latest product versions are used. Use of product versions that are no longer

supported, and failure to apply the latest updates may increase customer’s exposure to cyber

threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed under

https://www.siemens.com/industrialsecurity.

Synchronization modules for S7-400H

Equipment Manual, 04/2020, A5E50072434-AA 5

Security information

Synchronization modules for S7-400H

6Equipment Manual, 04/2020, A5E50072434-AA

Introduction 2

Purpose of the operating instructions

Using the operating instructions, you will be able to install the synchronization modules and

establish the link.

This manual replaces the "Synchronization modules" section in the manuals for the following

products:

Product Article number

CPU 412–5H 6ES7 412–5HK06–0AB0

CPU 414–5H 6ES7 414–5HM06–0AB0

CPU 416–5H 6ES7 416–5HS06–0AB0

CPU 417–5H 6ES7 417–5HT06–0AB0

CPU 410–5H 6ES7 410–5HX08–0AB0

CPU 410E 6ES7 410–5HM08–0AB0

CPU 410 SMART 6ES7 410–5HN08–0AB0

CPU 410SIS 6ES7 410–5FM08–0AB0

You can find the manuals on the Internet pages of Siemens Industry Online Support (https://

support.industry.siemens.com/cs/us/en/).

See also

SIMATIC Fault-tolerant systems S7-400H (https://support.industry.siemens.com/cs/de/en/

view/82478488)

SIMATIC PCS 7 Process Control System CPU 410 Process Automation (https://

support.industry.siemens.com/cs/de/en/view/109748473)

SIMATIC PCS 7 process control system CPU 410 Process Automation/CPU 410 SMART

(https://support.industry.siemens.com/cs/cn/en/view/109748474)

SIMATIC process control system PCS neo CPU 410-5H Process Automation V10 (https://

support.industry.siemens.com/cs/de/en/view/109773476)

SIMATIC CPU 410SIS (https://support.industry.siemens.com/cs/ww/en/view/109750080)

Catalogs

You can find the article numbers for the Siemens products relevant here in the following catalog:

● Industry Mall - catalog and ordering system for automation and drive technology, Online

catalog (https://mall.industry.siemens.com/goos/WelcomePage.aspx?regionUrl=/

de&language=en)

You can request the catalogs and additional information from your Siemens representative.

Synchronization modules for S7-400H

Equipment Manual, 04/2020, A5E50072434-AA 7

Device defective

If a fault develops, please send the device to your SIEMENS service center for repair. Repairs

on-site are not possible.

Recycling and disposal

The products are low in pollutants, can be recycled and meet the requirements of the WEEE

directive 2012/19/EU for the disposal of electrical and electronic equipment.

Do not dispose of the products at public disposal sites.

For environmentally friendly recycling and the disposal of your old device contact a certified

disposal company for electronic scrap or your Siemens contact (Product return (https://

support.industry.siemens.com/cs/ww/en/view/109479891)).

Note the different national regulations.

Trademarks

The following and possibly other names not identified by the registered trademark sign ® are

registered trademarks of Siemens AG:

Introduction

Synchronization modules for S7-400H

8Equipment Manual, 04/2020, A5E50072434-AA

Safety notes 3

Read the safety notices

Note the following safety notices. These relate to the entire working life of the device.

You should also read the safety notices relating to handling in the individual sections,

particularly in the sections "Installation" and "Connecting up".

CAUTION

To prevent injury, read the manual before use.

Synchronization modules for S7-400H

Equipment Manual, 04/2020, A5E50072434-AA 9

Safety notes

Synchronization modules for S7-400H

10 Equipment Manual, 04/2020, A5E50072434-AA

This manual suits for next models

Table of contents

Other Siemens Control Unit manuals

Siemens

Siemens M3P FY Series User manual

Siemens

Siemens SIRIUS 3SB3 User manual

Siemens

Siemens SIRIUS ACT 3SU14 User manual

Siemens

Siemens SIMOCODE pro Parts list manual

Siemens

Siemens SIMATIC ET 200SP User manual

Siemens

Siemens 3VM9.88-0LB10 User manual

Siemens

Siemens SINUMERIK 808D User manual

Siemens

Siemens SIMOCODE pro User manual

Siemens

Siemens SIMATIC S5 User manual

Siemens

Siemens SINUMERIK 840D Parts list manual

Siemens

Siemens SIRIUS 3RT1.4 User manual

Siemens

Siemens ECOFAST 3RK1911-4AB Series User manual

Siemens

Siemens SITRANS LU SAM User manual

Siemens

Siemens SIRIUS ACT 3SU1400-2EM10-6AA0 User manual

Siemens

Siemens SIMATIC User manual

Siemens

Siemens SIMATIC ET 200SP User manual

Siemens

Siemens SINUMERIK 802D sl Owner's manual

Siemens

Siemens SIMATIC ET 200SP CM 1xDALI Owner's manual

Siemens

Siemens SINAMICS G120 User manual

Siemens

Siemens DESIGO PXM20 User manual

Siemens

Siemens QPA228.FWNC Series User manual

Siemens

Siemens FCM2041-U3 User manual

Siemens

Siemens Simatic S7-1500/ET 200MP User manual

Siemens

Siemens SENTRON PAC RS485 User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual