Sharp PN-CD701 Owner's manual

Supplemental information for PN-CD701

Ver.1.1

SHARP corporation

5, Dec., 2019

Index

It is supplemental document of both setup and operation manual.

There are reference information which are not described in manual, please utilize it as well as

setup / operation manual.

1. System requirement

2. Condition of connecting Mac / Chrome OS

3. Outline of USB type-C

4. Conditions of network connections to the PN-CD701

4-1. Common functions of both LAN ports

4-2. Use case

4-3. Technical background

4-3-1. Network isolation

4-3-2. Network requirement for SWS (IoT sensor data)

4-3-3. Other network requirements

5. Notes on updating firmware

5-1. OOBE

5-2. USB Flash Drive

5-3. OTA Firmware Updates

6. How to enable LAN 1 Network

6-1. Procedure to enable LAN1 Network

6-2. LAN 1 network always on

6-3. Matrix of LAN1 Network status

7. How to install / use Android apps on

7-1. Preparation: Allow installation of 3’rd party applications.

7-2. How to display newly installed apps

8. Notes on camera attached to PN-CD701

9. Tips

10. Detail of setting menu items

＜＞

1. System requirement

2. Condition of connecting Mac / Chrome OS

Mac OS Chromebook

How to connect

Limitation

•

Works as mouse operation / single touch

•

Support multi touch (touch digitizer), but Touch pen does NOT

work.

Technical

Background

•

Mac OS is the system which does not support touch operation,

essentially.

•

Some of our Interactive White Board product supports Mac OS

with Multi touch operation, but it emulates function of touch pad

and it requires special driver.

•

It is not provided special driver because it is designed for

Windows.

•

PN-CD701 supports Windows pen-digitizer input by touch

hardware itself. It is distinguished whether finger touch or pen

touch.

•

In case of using it with Chromebook, touch pen does not work

because Chrome OS can not recognize pen-digitizer input.

Connection method 1: USB type-C (If the device has USB type-C port))

* It is common for both Mac OS and Chrome book

Connect by using USB type-C cable

- Video, sound, touch signal, LAN connection and also power delivery are available by the cable

- Touch function works with no special driver

Connection method 2: HDM and USB A-B cable (If the device does NOT have USB type-C port))

Connect by using both HDMI and USB A-B cable

- Video and sound are available by HDMI cable

- Touch signal and LAN connection are available by USB A-B cable

- Power delivery is NOT available (AC adapter required)

- Touch function works with no special driver

PN-CD701 is designed for using with Windows devices.

It supports both Mac OS and Chromebook but there are some limitations.

Note

3. Outline of USB type-C

USB type-C is a new standard which has various capabilities for connecting IT devices.

Some of these capabilities are unique to USB type-C.

Please see descriptions below how to utilize new functions.

Major functions of USB type-C

- Connect devices and data transfer (Same as USB 2.0 but higher speed)

-“DP alt mode” which means that it works as a DisplayPort to transmit video.

-“Power delivery” function enables user to supply power up to 100W (20V/5A)

Power supply

yes

Camera (Video

in)

yes

Mic (Audio

-in) yes

Video

-out yes

Audio

-out yes

Network (LAN)

yes

Touch signal

yes

USB devices

yes

Functions available by connecting devices with USB type-C

USB hub

Main circuit

USB type A

- USB flash drive

- Mouse/Keyboard

(Human Interface device)

- Other USB devices

Camera

(Video/Audio) (IoT sensor)

USB-LAN

Converter internet

Wired LAN

connection

LAN connection becomes enabled when you

connect your PC by USB type-C.

But in case of PN-CD701, it is necessary to do

some additional procedures to enable LAN function.

Please refer next section.

◆When a USB type-C cable is connected, the functions shown it the table below are available.

◆The USB Type C cable may also provide power to the connected PC.

Contact your local electrical contractor before running the supplied cable under carpets,

behind walls or over ceiling tiles, as regulations may vary.

◆If you use 8m USB type-C cable(PN-ZU01), please observe the following points. It may cause a fire.

Caution for running USB type-C cable

•Do not use the USB type-C cable rolled/tied up.

•Do not lay the USB type-C cable under the carpet.

•Do not to be routed inside the building structure (e.g., walls, ceilings, etc.).

•If a cable is damaged, never use the cable.

•If you connect this cable to PN-CD701, please fix the cable with a clamp.

• This cable has a “SOURCE” connector and a “DISPLAY” connector.

Be careful not to mistake the orientation.

Figure. Fixed the cable Figure. Connector

Function of USB type-C Available/

Not Available

DP Alt mode(Video stream) Available

Network * Available

Touch (Data Transport) Available

Power Delivery Available(MAX 60W)

Table. Function of USB type-C

3. Outline of USB type-C

“In case you using USB-C cable from your market (not

delivered with PN-CD701), the take care the this cable

should be supported power charging of 60W or more.”

[Note]

◆USB type-C Out can be used for video output.

◆About “Multi board”

Caution for running USB type-C cable

Figure. Rear Left View

•Only video signals are output from USB type-C Out.

•The signal of Wireless Cast can not be output.

•Do not convert the cable from the USB type-C cable.

•Only the same display or allowed display is supported for the display connected to the Out side.

3. Outline of USB type-C

You can display video on a second device using USB-C Out.

The USB-C cable enables touch without connecting a touch cable.

If you want to touch on the second display, please connect as follows.

*Touch settings on the PC must be set.

USB-C cable

Touch cable

(USB-B cable)

HDMI cable

2nd unit

1st unit of PN-CD701

Figure. Daisy chain connection

4. Conditions of network connections to the PN-CD701

PN-CD701 has 2 wired LAN ports.

One is “LAN 1”, and the other is “LAN 2”.

Each port serves a different function, see below for details of each port.

IoT sensor

Fig. 1 : Backside of PN-CD701

LAN 2 : LAN port for output data & control of PN-CD701

The port is mandatory for using SWS

(Synappx WorkSpacesTM).

Collected data by IoT sensors are uploaded to internet via

this LAN port.

Furthermore, the main body will be controlled via this port by

using “Crestron connected” devices.

LAN 1 : LAN port for connecting external PC/s

LAN 1 connection is routed to USB type-C and USB-B

ports. The connected PC device will receive internet

access via the USB type-C or USB-B port.

(Please confirm this method of network access is

acceptable with the network IT administrator).

4-1. Common functions of both LAN ports

4. Conditions of network connections to the PN-CD701

IoT sensor

Fig.2: LAN connection diagram

4-2. Use case

Internet

LAN –USB converter

User who has a compatible USB type-C

connection on their PC will also get a LAN

connection via the USB type-C cable from

PN-CD701.

Advantage: Smart connectivity

User can quickly connect video,

touch, LAN and power delivery by

using only one USB type-C cable.

In case of using a PC which does not support USB type-C

USB cable for touch

HDMI cable

Network hub or switch

to PN-CD701

to AC outlet

Note:

Please DO NOT connect both USB type C cable and HDMI/USB

type B (for touch) cable to same PC simultaneously.

it may cause of malfunction.

4-3. Technical background

•Each LAN port (LAN 1, LAN 2) are separate and will have different IP addresses.

•There are no network management devices (routers or switches) inside.

•Works with different LAN settings.

PN-CD701

IoT Sensor

Internal controller

for IoT sensor

Port:1,2,4

Port:5,6

USB -> LAN

Converter

USB -> LAN

Converter

USB

Ethernet cable

LAN

IP address A

IP address B

Set with

External Source

(PC devices)

Set with

PN-CD701 GUI

Internet

Access to Azure

USB cable

Ethernet cable

Both network are

completely separate

LAN 1

LAN 2

“LAN 1” is completely isolated from the internal controller of PN-CD701

So there is no security breach concerns from connected PC devices.

4-3-1. Network isolation

Other manuals for PN-CD701

Table of contents

Popular Monitor manuals by other brands

Linear Acoustic

Linear Acoustic LQ-1000 user guide

AOC

AOC I2579V user manual

Gateway

Gateway FPD1520 user guide

Furuno

Furuno Mu 120c Operator's manual

Asus

Asus VB171D - 17" LCD Monitor Service manual

Dell

Dell S2230MX Setting up

Philips

Philips 107C64 user manual

Dell

Dell S2409WFP user guide

EverFocus

EverFocus EN-7517E instruction manual

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

Dell

Dell Precision 7680 Connection guide

LG 50PM1M - - 50" Plasma Panel Service manual

Bosch

Bosch DDU 9 manual

Acer

Acer A231HL user manual

Philips

Philips 86BDL4152T user manual

NEC

NEC AccuSync LCD5V user manual

Emay

Emay SleepO2 user manual

IBM

IBM 6360 Product support manual